If the bottom rail of the cabinet sliding door is damaged, if only the bottom rail is replaced, will

It doesn't affect. The cabinet is a necessity in the life of our restaurant kitchen, which can provide a practical service platform for our cooking and cooking, and also provide a place for storage and sorting of kitchen utensils in the restaurant kitchen. However, the cabinet in the whole process of application is the most very easy to break is the slide, which makes many customers feel a headache, not clear how to solve, the following by the article to understand how to repair the cabinet slide rail and how to install the cabinet slide, let's take a look.

If the cabinet slide is caused by kitchen fume dirt, it will increase the sliding friction and block the application of the cabinet. If it is opened too often and leads to destruction, such a thing is proposed to replace the new one immediately.

Cabinet cabinet hardware accessories are broken, must be replaced with new hardware accessories, dismantling and replacing spare parts must pay attention to the purchase of model specifications corresponding, according to the size of the slide rail and the provisions of the cabinet purchase.

How to disassemble and assemble cabinet slides? The disassembly and assembly of the slide rail is very simple, and the customer must first clarify which kind of cabinet slide rail is in his home, with three tracks and sheet metal slides. The three tracks must first pull the cabinet out, pull to stop and look carefully, the two sides of the cabinet will leak out a sharp item, both sides are there, press the plastic card down, everyone can understand the sound of hearing, which indicates that it is opened.

After the cabinet is removed, ensure the balance of the cabinet, and do not have to exert too much force.

Check whether the track ghost is deformed or other abnormalities, if it encounters the deformation situation, you must adjust the deformed part, and then fix it and install it well, and then install it according to the previous method. In the process of disassembling and assembling the slide rail, we must pay attention to the amplitude and not use too much force, which will cause damage to the parts and cabinets.

How to install cabinet slides? Install the chest of drawers: the customer must first assemble the 5 planks of the chest of drawers, and then use a screwdriver to tighten the nut, the control panel of the chest of drawers generally contains slots, and there will be 2 holes in the middle for installing handles.

Rail installation: Before the track is installed, the track must be unloaded, the narrow part is installed on the back plate, the wide one is installed on the cabinet body, and then installed back. Flat chest of drawers in front of the side beams.

Cabinet installation: The customer should tighten the screws on the plastic interface on the baffle of the cabinet, and then remove the wide track on the pile, and fix the slide rails with small screws on the front and back, and the cabinet must be installed on both sides, and it must be fixed well. The installation of cabinet slides can be installed by a professional carpenter master to prevent damage to the slides.

No, changing the bottom rail will not affect the normal use in this case, as long as you choose the appropriate type.

It will not affect the use of the cabinet, because the bottom rail can make the cabinet move flexibly, and it will not affect the storage of the cabinet.

Of course, you can choose the best bottom rail, and then let a professional master install it, which will not affect the use or experience effect.

Summary. I was supposed to hang the sliding door of my kitchen, but he installed it with a ground rail, and if I change the hanging rail, will it affect it?

Hello dear, the ground rail of the sliding door is generally glued with glass, in this case, if it is a long time, you want to remove it is completely removal, as long as you use a fast nose, the blade will be removed slowly cut on both sides under the dk, after removing it you want to reinstall, you can buy a tube of glass glue with more reliable quality, re-hit the double-sided on the top and then fix it with the double-sided tape, and then use the double-sided adhesive paper to fix it, and you can reuse it after the glue is dry.

I was supposed to hang the sliding door of my kitchen, but he installed it with a ground rail, and if I change the hanging rail, will it affect it?

The sliding door of my kitchen I was originally going to hang the rail, he installed the ground rail, if I change the fiber surplus hanging rail, will it affect you, dear, the sliding door of the ground rail is generally glued with glass glue rolling vertical picking, this situation if a long time, you want to remove it is completely removal, as long as you use a fast nose, the blade will be removed on both sides of the DK under the slow cutting on both sides, after the removal you want to reinstall, you Dachang can buy a tube of glass glue with more reliable quality, After re-hitting the double-sided tape on the top, fix it with the double-sided tape, and after fixing it, the glue can be used again when it dries. I hope it can help you.

Will it have an effect on the tiles in the ground.

Our designer said that if you change it, you will have to remove the tiles on the top.

If the ground rail is replaced by the hanging rail, will it have an impact on the tiles on the ground?

If the ground rail is replaced by the hanging track on the porcelain Henglu brick on the ground, it will not have an impact on the porcelain Henglu brick on the ground, you are good to ask the belt pro, dismantle the sliding door ground rail, will not destroy the floor tiles, because the ground rail is glued to the floor tiles with very little glue, and it will not destroy the floor tiles. I hope it can help you.

Our designer said that if you change it, you will have to remove the tiles on the top.

The designer said that our wall is too thin to do a full package, only a half package, so when the door is installed, it is divided, if it is removed, it will have an impact on the tiles.

The design instructed the slag master to say that my wheel state wall is too thin to do a full package of only a simple cover can do half a package of covers, so when the door is installed, the package is divided, if the demolition will have an impact on the tiles, you are good, you can only listen to the designer's oh pro, I hope to help you.

Ask about custom messages].

Summary. Install the sliding door track: fix the upper track, use the gravity cone (hanging wire hammer) to hang 3 points at both ends and the middle point of the upper track, draw the point with a grease pen on the ground, install the upper track, and then put a hammer to the ground at the center point of the upper track, put the vertical line at both ends of the track, and fix the lower track on these 3 points, so as to ensure that the upper and lower tracks are completely parallel, and the push and pull of the sliding door is in the best state.

Install the sliding door track: fix the upper track, use the gravity cone crack beam (hanging hammer) to hang 3 points at both ends of the upper track and the midpoint on the ground with a grease pen to set the surface, install the upper track, and then put a lifting hammer to the ground at the center point of the upper track, put the vertical line at both ends of the track, and fix the lower track at these 3 points so that the upper and lower tracks are completely parallel, and the push and pull of the sliding door is in the most slag oak state. Wanton.

If your push-pull door is on the lower track, and you want to change the upper track, this is not easy to change, because the structure of the lower track is not the same as the structure of the upper track rail surging state. The sliding door of the lower track can only be used on the lower track, if there is something wrong with your sliding door, this can be re-bought on a new track on this is OK, but you can't change it if you want to change it.

Dear, I'm glad to answer for you: Does the lower rail of the kitchen sliding door need to be redone for the upper rail? A:

Dear, oh you need it, you can install the sliding door track: fix the upper track, use the gravity cone (hanging hammer) at both ends of the upper track and the middle point to hang 3 points on the ground with a grease pen to draw out the point of the fixed surface, install the upper track, and then put a hammer on the center of the upper track, such as the respectful type to the ground, both ends of the track should be placed on the vertical line, the lower track is fixed on these 3 points, so as to ensure that the upper and lower tracks are completely parallel, and the push and pull of the sliding door is in the best state.

Fix the upper track, use the gravity cone (hanging hammer) at both ends of the upper track and the middle point to hang 3 points on the ground with a grease pen to draw the point fixed surface, install the upper track, and then put a lifting hammer to the ground against the center point of the upper track, put the vertical line at both ends of the track, and fix the lower track on these 3 points, so as to ensure that the upper and lower tracks are completely parallel, and the push and pull of the sliding door is in the best state. I hope this service can help you, you can click on my avatar to pay attention to me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. I wish you a happy life, all the best, peace and joy.

Decorating the kitchen to do the sliding door floor rail, there will be a bad cleaning effect in the later stage. After a long period of use, there will be a lot of stains on the sliding door. Cleaning these stains is very cumbersome, time-consuming, laborious, and difficult to clean.

With the increase of use, the sliding door will become difficult to open and close, and even the track will be damaged. Finally, if the sliding door is used for a long time, the opening and closing will not be so smooth, and it will be repaired diligently in the future. For owners who pay attention to decoration, if the kitchen door at home does not consider the money, it is better to install a new door.

1.In real life, many sliding doors will choose ground rails. After a long period of use, you will find that dust is particularly prone to accumulating on the slides, especially in the kitchen.

After a long period of use, there is a thick layer of oil stains inside, and it is difficult to push open the door at the back. If you find it difficult to clean, it is best to hang the rail sliding door. You can clean from the roots.

The floor can also be tiled with the same tiles as the living room, which has a stronger sense of space. Although the tile countertop looks simple and generous, it is easy to clean, but the tiles are not very firm, and the gaps between the tiles are easy to mold and yellow over time, which is very beautiful.

2.One of the original intentions of installing a door in the kitchen is to block the oil smoke that will spread freely, so as not to affect the tidiness of other home spaces and the normal life of the family. However, the sliding door itself has a shortcoming in sealing, its sealing performance is not as good as the swing door, hanging rail door, folding door, because there are always some tiny gaps at the junction of the two doors, and such a door can not well block the random entry of oil smoke.

3.If you use an aluminum alloy sliding door to choose a sliding door for the slide rail, it will be easier to clean up the small kitchen garbage that falls into the rail. Since the sliding door does not have deep grooves and is relatively easy to clean if you choose a slide, it is not recommended to use hanging wheels for the kitchen sliding door.

Moreover, the hanging rail sliding door will be more troublesome in construction, maintenance and commissioning, while the sliding rail is relatively simple. The above is the answer to the question of what will be the impact on the sliding door floor rail in the decoration kitchen.

When choosing a sliding door when decorating the kitchen, you must choose an upper sliding door, because the kitchen is a serious sanitation area, and if you choose a sliding door, it is easy to hide dirt and dirt.

Cleaning and recovery is very troublesome, prone to all kinds of oil stains, there is no way to be good, to ensure clean, to ensure hygiene, maintenance is also more difficult.