How to disassemble and assemble the wardrobe sliding door, and how to remove the wardrobe sliding do

It is not recommended to disassemble and assemble by yourself, and you should find a professional master to prevent the hardware from being damaged.

Lift up and then take it down.

1. One person lifts a door so that it is not affected by the top pulley, and one person uses a slender stick such as a screwdriver to gently move the top pulley of the lifted door outward and get out of the position of the door.

2. The door can be lowered when the pulley is separated from the sliding door, and the door without the pulley cannot slide freely.

3. Lift the door again and drag the lower part of it outward, the door needs to be installed back after being removed, and the steps are the opposite of the steps removed.

4. Pay attention to one point, don't push the pulley back to the iron groove at the top of the door, and you're done.

How to remove the sliding door:

1. Lift the sliding door first, and then take the screwdriver.

Move the pulley outwards and let it move away from the sliding door.

2. Then put down the sliding door, the sliding door will not move after losing the pulley, and then lift the sliding door and drag the pulley below.

3. After the pulley is taken out, the sliding door can be disassembled.

What are the common sliding door materials?

1. The wooden structure sliding door, its material is taken from nature, the appearance of the texture is clear, the touch is strong, so that people have a warm feeling, but also can improve the home decoration, but it is widely welcomed by people, but this material can not be used in the humid environment, otherwise there will be the problem of mold, so the corresponding moisture-proof measures must be done.

2. Plastic steel. Sliding doors are widely used in the north to withstand strong winds due to their excellent sealing effect and the fact that the outer layer does not deteriorate and deform easily, and can be equipped with insulating glass if there is a lot of noise around them.

In this way, good sealing and sound insulation can be guaranteed.

3. Aluminum alloy sliding door, its high strength, light weight, will not be easy to age, and can be used for a long time, and the doors and windows of this material are economical, widely used, green and environmentally friendly, so it is widely loved by people and can be used in humid environments such as bathrooms and kitchens.

1. First of all, two people should lift the door leaf at the same time, so that it will not be affected by the top roller skating. 2. Ask a person to use a hexagonal screwdriver or a long and thin gadget to bounce up the top of the door, and gently move it outward and get rid of the door. 3. You can learn to put down the door by getting rid of the sliding door in roller skating, and everyone must have more strength at this time.

4. Without the roller skating door, you can't move freely, so everyone lifts the door again at this time and holds the lower part of it outward. 5. After the door is removed, everyone may want to install it back, and the process is reversed from the process above. It should be noted that if you slide the wheel to the iron groove at the top of the door, you do not need to use too much force, otherwise too much force will cause reaction.

1. Prepare aluminum alloy to frame, two lines, one at the top of the wardrobe and one at the bottom of the wardrobe. The upper part is wider and the pulley slides horizontally, and the lower part is narrower and the pulley slides vertically.

2. Then use an electric drill to drill an aluminum alloy wire at certain distances, and the left and right grooves are best drilled alternately.

3. Then use your hands to prop up a wide aluminum alloy wire, adjust the distance between the two ends and both sides of the cabinet, and then screw the screws.

4. The lower side is the same, due to the weight bearing of the lower part, you can screw a few screws less, only need to screw a few doors, and pay attention to the outer side of the upper and lower aluminum alloy wires should be close to the edge of the large cabinet.

5. Then the sliding door is vertical, with one end of the wheel facing down. First, the upper part is snapped into the slot, and then the lower wheel has springs. Break the wheel firmly until it can snap into the groove underneath.

6. After all sliding doors are installed, they can be adjusted to close them in an orderly manner. Because the slider wheel has springs, the height can be adjusted to control the height of the door. Finally, both sides of all doors can be on the same level.

The wardrobe is a piece of furniture that every family can't live without, with the wardrobe, our clothes will no longer be placed everywhere, all are placed in the wardrobe in an orderly manner. Nowadays, there are many types of wardrobes. There are sliding wardrobes, sliding door wardrobes, swing door wardrobes and open wardrobes.

Today I will introduce to you the installation method of the wardrobe sliding door track of the push-pull wardrobe, and the installation of the wardrobe sliding door track is a problem that many people are confused about.

Wardrobe sliding door track installation process

1. Upper track installation. It is necessary to place the track in the middle of the door sleeve, so carefully measure the dimensions of the 2 sides first.

2. Drill holes after positioning.

3. The two sides are fixed and the hole in the middle is drilled.

4. Install the lower track and wipe it clean first.

5. The position of the lower rail is positioned, and the sliding door is placed in the upper and lower tracks first, and the position is adjusted to make the sliding door achieve the best sliding effect.

6. Then fix the position of the lower rail, and clean the inner layer of the track with a brush.

7. Sliding door installation. First, lift the door gently to let the upper pulley of the door enter the upper track, and then lift the sliding door with one hand, and pull the lower wheel with the other hand, so that the lower wheel can smoothly enter the lower track.

8. The installation of the sliding door is completed, and the next step is to paste the anti-collision strip to protect the sliding door.

Wardrobe sliding door track sign introduction

1.Dinggu topstrong (Guangdong famous brand, Guangdong famous trademark, high-tech enterprise, Guangdong private technology enterprise, sliding door top ten brands, Zhongshan Dinggu metal products).

2.Sophia Sliding Door (started in 2001 in Guangzhou, Sliding Door Top Ten Brands, One of the Most Influential Building Materials Brands in South China, Guangzhou Ningji Decoration Industry Co., Ltd.).

3.Holike (Guangdong famous trademark, high-tech enterprise, Guangzhou famous trademark, one of the leading brands leading the development of China's overall wardrobe, Guangzhou Holaike Furniture).

4.Lami (founded in 2003, from the Canadian international brand, the top ten brands of sliding door sliding doors, Shanghai well-known brand, China's famous brand, Shanghai Lami door industry****).

5.Phukini Sliding Door (Top 10 brands of sliding door, focusing on the overall wardrobe Sliding Door, authorized design by Italy Puccini International Group, Pucciny Home (China)****).

Well, the above is the installation process of the wardrobe sliding door track introduced to you. Here, I would like to tell you that the quality of the installation of the wardrobe sliding door track directly affects the later use, and it may also be dangerous, so you must pay attention. Finally, I introduced the wardrobe sliding door track brand to you, and introduced five brands to you, which are all leading in the wardrobe sliding door track industry, so you can give priority to these kinds when choosing.

Wardrobe sliding bai sliding door installation steps:1. Distinguish and clean the main components of the sliding door and the installation location, DAO needs to be noted here.

Distinguish the upper and lower track boxes of sliding doors. Genus.

2. The general E-shaped track box on the market is above, using screws and other hardware accessories, fixed at the upper end of the wardrobe, and the surface of the wardrobe can be level.

3. The track box like a flat plate is the lower end, which is fixed about ten millimeters away from the counter surface, and the moving door is put in. The final step is to use a six-bar wrench to adjust the height of the wheel to level the surface of the wardrobe.

Summary. Locate the plug cover bottom rail sliding door and cover the adjustment screws of the drum with the end of the panel facing downwards.

Insert a small flathead screwdriver between the plug and the frame and pry the plug.

Insert the screwdriver into each hole and lower the drum and rotate the adjusting screws counterclockwise.

How to disassemble a sliding door wardrobe**.

Locate the sliding door on the bottom rail of the plug cover, cover the adjustment screws of the roller, and finger the side of the panel with the end of the row facing downwards. Insert a small flathead screwdriver between the plug and the frame and pry the plug. Insert the screwdriver into each hole and lower the drum and rotate the adjusting screws counterclockwise.

Weiling. Remove the head stop from the top of the frame on the inside of the frame on the track, remove it with a cordless screwdriver slag elimination code, and fix the head with a fixing bolt. Open the sliding door with the door panel, and pull up the door at the bottom of the lower rail, and lower the panel to pull the door panel beam on the upper rail. Disconnect the sliding door that holds the panel from the frame, at which point the set screws may have been removed with a cordless screwdriver along the top, bottom and sides of the set screws.

Lift the panel and pull out the bottom of the sliding door panel from the bottom of the track.

The installation of wardrobe sliding doors should be stable and easy to use, so let's talk about the methods and steps of sliding door installation.

1. Upper track installation. It is necessary to place the track in the middle of the door sleeve, so carefully measure the dimensions of the 2 sides first. Drilling after positioning; The two sides are fixed, and the hole in the middle is drilled.

2. Install the lower track and wipe it clean first; The position of the lower rail is positioned, and the sliding door is placed in the upper and lower tracks first, and the position is adjusted to make the sliding door achieve the best sliding effect; Then fix the position of the lower rail, and clean the inner layer of the track with a brush.

3. For the installation of the door, first lift the door gently to let the upper pulley of the door enter the upper track, and then lift the sliding door with one hand, and pull the lower wheel with the other hand, so that the lower wheel can smoothly enter the lower track.

4. Anti-collision protection, after the installation of the sliding door, the anti-collision strip should be pasted to prevent the impact damage caused by the back and forth push and pull to the door.

Many people like the sliding door when choosing a wardrobe, because the sliding door does not take up space, and it is also very convenient to use, so how should the sliding door wardrobe be installed correctly after buying it home? Let me introduce you to the steps of sliding door wardrobe installation.

1. How to install the sliding wardrobe door.

1. Install the track in place first, generally speaking, the track should be placed in the middle of the whole wardrobe door, and the relevant size should be measured.

2. After determining the position, you need to use an electric drill to drill the hole, and when drilling, you should pay attention to it, and you can't deviate from it, and you can't get the position wrong with hand shaking. After drilling the hole, it can be fixed with screws, and another hole should be drilled in the middle. Fix the screws with a screwdriver.

3. The next step is to install the track of Ansun Pi, the surface should be wiped clean, and the track should be installed and positioned. Generally speaking, put the upper and lower tracks first, and then adjust the position.

4. After installing the track, it is necessary to install the sliding door, which needs to be lifted and then corresponded to the track above, and the other hand should be lifted to lift the sliding door, corresponding to the track below, which requires two people to cooperate to be able to complete it better.

Second, choose the open or sliding wardrobe door.

1. Wardrobe with sliding doors. If you choose this type of wardrobe, it is relatively large in internal space, and more importantly, it will take up space without holding socks after opening, so it is more convenient to use and the space utilization rate will be higher. Some people can also customize the entire wall into a wardrobe, which can save space even more.

2. Wardrobe with double doors. If the room area is a little larger, you don't have to worry about occupying space, you can choose this kind of wardrobe with side doors, after the doors are all opened, the objects inside can be seen clearly, and it is more convenient to take things.

Summary: Choosing a wardrobe needs to be decided according to the actual situation at home, and if you choose a sliding door wardrobe, it is also very good, but you have to know how to install it.