How can the rough house be designed with new ideas Is there a good recommendation?

You can first clarify your favorite style and then design, apply a good-looking latex paint on the wall, and then match it with soft decoration, and choose a very popular hard decoration style at the moment.

When designing the rough house, you can add some elements you like to it, such as opera, Peking opera, small freshness and other elements, and design new ideas; It can be recommended to use the industrial style decoration style, the room design is a little darker, which makes people look different and very innovative.

It is recommended that when designing, you should determine the decoration style, choose Nordic style, choose to divide different areas inside, you can divide a study room, and put some books in it.

Rough room style decoration features:

1. Wall planning.

There are usually two ways to treat the wall, one is to replace the painted wall with a brick wall, there is no information more representative of industrialization, the gap between the bricks gives the interior an old visual effect, and builds a rough air; The second is to use the initial cement wall, compared with the retro feeling of the brick wall, the cement wall has a modern sense, so that the space adds a bit of tranquility, and you can feel the silence and grandeur of the slow light. However, it should be noted that the ceiling wall is still best coated with retro paint to ensure the safety and stability of living. Squire.

Second, the empty door is wide open.

The industrial style decoration planning is to pay attention to the connectivity of each space, there is no physical cutting in each functional area, the number of doors is reduced as much as possible, and there are not too many barriers, but in order to prevent the space from appearing too empty, we must pay attention to the reasonable planning of the orientation when placing the furniture.

3. Exposed line pipes.

The industrial personality of the treatment of the pipeline must be in different ways with the traditional decoration, not deliberately hiding all kinds of water and electricity pipelines with pipes, but as an interior decorative element, through the direction and color cooperation, to create a unique and interesting highlight decoration, this overturning the traditional decoration method is also the most attractive place.

Fourth, color matching.

In terms of color selection, we must highlight the characteristics of industrial style: decadent, healthy, and characteristic, mostly using gray, brown, and wood colors as the main colors, adding some bright color accessories to add a sense of softness to the space. The special introduction is the combination of black, white and gray, black mysterious and indifferent, white elegant and brisk, gray calm atmosphere, mixing and interweaving can create more layers of changes, add vitality to the room.

Fifth, old accessories.

Industrial personality generally chooses accessories with a sense of the times, and the colorful traces of old objects can highlight the industrial personality, such as a pair of scissors from the second-hand market, an iron box, a shabby storage box, rusty things, etc.

6. Metal furniture.

Metal furniture is a depiction of industrial personality decoration can not be short of information, reflecting a sense of roughness, in order to prevent a lot of metal products from appearing too healthy in the room, can be mixed and matched with metal and wood products, leather products, play a soft effect. The lamps and lanterns belonging to the skeleton of the golden object are excellent decorations for the invention of industrial style, and they can bring changes to the surrounding atmosphere when placed on the lamp.

7. The use of leather goods.

Choose leather furniture with a sense of wear and classic colors, and decorate it with unique leather crafts to make the space more retro charm and add a sense of the times.

How to decorate a rough house? The decoration of the rough house needs to be designed and planned according to personal preferences and actual conditions, and the appropriate decoration style and materials are selected, and the installation and construction are carried out to achieve the ideal residential effect in the hearts of individuals.

Here is a recommendation to find a professional and reliable decoration company, just enter the area + city, and immediately recommend the right decoration company according to the owner's needs and budget: [Click to match 4 local high-quality decoration companies immediately].

Before carrying out the renovation, you need to understand the local renovation market situation and clarify your budget and actual situation. According to the personal situation, select decoration materials and decoration companies or construction teams, and carry out specific decoration plans. Decoration** varies from place to place, generally between 500 yuan and 1500 yuan per square meter, and needs to be budgeted and assessed on a case-by-case basis.

It is recommended to inspect and maintain the air quality and laying pipes of the rough house before decoration; Reasonably design the room layout and decoration style, and choose the appropriate wall and floor materials, home decoration accessories, furniture, etc. for decoration; In the decoration process, it is necessary to pay attention to the construction safety, environmental protection and speed of material use, and reasonably control the decoration quality and project progress.

The decoration of the rough house has a certain degree of difficulty and complexity, and it is necessary to select a reliable decoration company or worker team, and strictly carry out the supervision and acceptance. Make a reasonable plan and budget, and adjust it according to the actual situation to achieve the expected effect and decoration quality, so that life is better and more comfortable.

After many owners get the key, they feel at a loss for the decoration of the rough house, most of the owners like to give full authority to the decoration company to decorate, but for some owners who are not very rich in hand will choose to decorate themselves, then, the following will introduce how to decorate the rough house.

First, how to decorate the rough house.

In the preliminary design, the rough house should be specifically measured, and the measured content includes the area involved in the decoration process. After the main body is renovated, the water and electricity will be transformed, and the indoor sewers will be packaged with moisture-proof decorative materials. After the water and electricity renovation is accepted, the bathroom and kitchen are waterproofed.

Choose a professional master to lay the tiles, level, sand and roll the walls, and then start painting or laying the wallpaper. After that, you can install the indoor sockets.

Second, what are the advantages of buying a rough house.

1. Customize your personal preference decoration style.

Many people will choose to buy a rough house, because the rough house can be decorated by itself, because everyone's aesthetics are different, and the rough house is like a blank paper, the owner can implement the decoration through their own preferences, and everyone shows their own personality and taste from the decoration style.

2. The quality of the house is clear at a glance.

When you buy a house, you should not only look at the type of house, but also look at the quality of the house. Because the house is mainly used for living, if the quality is very poor, it will bring a lot of unnecessary troubles to the owner in the future, the rough house because it has not been decorated, it is easy to check the quality of the house, if it is a hardcover house, then it will be relatively troublesome when checking the waterproof function and pipe layout, and the rough house will not have this problem.

3. The total price of the house is low and cost-effective.

The total price of the rough house in the same location and house type is cheaper than the hardcover house, because the purchase cost of the rough house is relatively low, and the rough house is generally decorated by itself, which can also save a lot of money, and is much higher than the hardcover house in terms of cost performance, which is the first choice of many buyers.

The decoration work of the rough house is divided into pre-decoration planning, water and electricity renovation work, and the process sequence of decoration.

1. Planning before decoration.

Before renovating, you should have a general understanding of the house and make a general plan, and the purpose of each area must be clear. It's best to take a detailed survey of the house yourself, and measure all the places that will be involved in the renovation process. There is also a need to be clear about your own decoration style, according to your own conditions and preferences to determine the decoration style, you can go to the Internet to find some relevant house decoration plans to understand.

2. Hydropower renovation work.

If the general planning of the main body is completed in the early stage, then the hydropower transformation work will be carried out. But don't forget to measure the cabinet before the water and electricity transformation, so as not to fix the position of the water and electricity later, and the installation of the cabinet will be troublesome.

3. The process sequence of decoration.

Generally speaking, the appearance principle of decoration follows the principle of "whoever is dirty first", including things like risers, suspended ceilings, and plaster lines.

What is a rough house?

Rough houses are also known as "initial decoration houses", most of such houses only have door frames and no doors, and the walls and floors are only done with foundation treatment without surface treatment. All exterior finishes of the house, including balconies and rain covers, should be completed according to the design documents. Rough houses are also known as "initial decoration houses", most of such houses only have door frames and no doors, and the walls and floors are only done with foundation treatment without surface treatment.

All exterior finishes of the house, including balconies and rain covers, should be completed according to the design documents.

The method of decorating the layout of water and electricity in the rough house is a step.

Clause. First, we must plan first, those places need to be renovated, generally speaking, bedrooms, bathrooms, living room balconies, etc.

Clause. Second, the installation of the living room, the installation of the lights in the living room generally needs to install dual control, and turn on the lights when entering the room, consider the TV wall, dining room sockets, etc., the living room can be designed with a few more sockets.

Clause. Third, for the design of the bathroom, you need to consider the exhaust fan, lighting, bath bomb and so on, and there is a very important thing is the electric water heater, and then the design must consider waterproof, safety first.

Clause. Fourth, the kitchen water and electricity design, generally need to transform a lot of places, kitchen appliances more, you can do a few more power panels, to the small home current out of enough position, if the washing machine into the kitchen, you need to consider the waterway should be changed under the position.

Clause. Fifth, now the bedroom transformation, the transformation of the bedroom circuit can save some, the lights inside do not need dual control, if it is some enthusiasts, you can also have more of your own need to transform.

Clause. Sixth, in the process of decoration, if you don't have an idea, you can look at the neighbor's design, according to the neighbor's design, absorb the better place, and go to the dross.

There are the main points of the decoration of the rough house of the house:

A preparation tool:

Before decorating, you need to prepare a tape measure, a calculator, and a large plate clamp (for clipping sheets and receipts); In addition, it is best to prepare old towels (the kind of soft cotton, used for rubbing bricks after pasting) and plastic bags (wrapped around the pipe interface to prevent dirt from clogging) at the construction site in advance

b choose a good day to start work:

Before the arrival of the workers, it is necessary to register in advance the various sizes of the corners of the house. Don't be lazy about this, or you'll lose a lot of money. The content of the measurement mainly includes: tile area, wall paint area, wallpaper area, and floor area.

c. Demolition and modification of the main body:

The main demolition and renovation includes wall demolition, wall building, shoveling wall skin, dismantling heating, replacing plastic steel windows, etc. The garbage after demolition and modification should be cleaned out in time to ensure the cleanliness of the room, and it is also to facilitate construction.

d. Retrofit hydropower:

Before the transformation, be sure to determine the exact location of switches, lamps, basins, bathtubs, washing machines, etc. The cabinet designer should come to the door to take the first measurement to help you determine the transformation plan of the power supply and water circuit. For water heaters, it is also best to send someone to design the location of the power supply and interface according to the model you have determined.

E-package riser: Because the kitchen and bathroom are prone to moisture, the material of the package riser must not be made of wooden keel, even if the wooden keel is brushed with anticorrosive paint.

F tiling: Before tiling, floor drain must be considered. Pay attention to the floor drain must be bought anti-rot and anti-odor function, and the washing machine or shower drain should use a special floor drain.

G oiler: All carpentry work, even if it is just to do the pass, must follow this step, the large core board sinks to the bottom, the veneer is veneered, and then it can be painted.

i. Installation of the socket panel:

When buying sockets, it is best to buy a switch function, especially in the kitchen, so that the rice cooker and microwave oven can be controlled without plugging and unplugging the power supply.

J kitchen and bathroom ceiling, cabinet installation:

First of all, it is necessary to install the water heater and bath bomb, and after installation, the ceiling edge sealing can be better than the half-pack water heater.

Hello, first of all, you have to think about how to decorate, it is best to buy your own materials, call workers to work, so that you are tired a little, money can save tens of thousands, and then you go to the market to go around, you want the materials of the **, quality standards, workers' wages and benefits, package to the decoration company, what do you don't understand you to find me to help you explain, I hope to help you.

If you look for a renovation company.

There's nothing to do. Investigate first**, then everything they do.

own words. First, consider the overall style.

What kind of decoration do you want and what kind of effect does it look like?

Once you have the overall idea, choose the colors.

Then, according to the money, the materials are selected. Note: Don't choose bad materials for the sake of cheapness, generally should be the ground, wall, carpentry is a major item, and the others should not be decorated too much.

Pay attention to environmental protection. Floor, wall, carpenter to choose a good material. Durable and eco-friendly.

It's comfortable to live in, and it's good for your health

If you want to make your house beautiful, decorate it a little more. Embellishments and the like.

In short, light decoration, heavy decoration.

Find a good decoration company to help you design it, so that it can be more integrated.

There are generally three stages in the rough house decoration process.

In the first stage of design, it is necessary to communicate with the decoration designer to understand the decoration style that the owner likes. And to incorporate the popular fashion trends into it, after deciding on the design plan, it is necessary to start selecting the decoration company.

The second stage is the construction phase, where the renovation company carries out the demolition and renovation work, including the renovation of water and electricity and the inspection of concealed works. For example, it is necessary to test whether the floor heating is unobstructed and whether the waterproof project is in place. After the water discharge is done during the construction process, a 24-hour closed water test is required.

Once all the water and electricity are ready, it is necessary to paste the floor tiles and tiles.

The third stage is the carpentry work.

After the carpenter enters the site, it is mainly for the construction of ceilings, ceilings and gypsum corners. This includes the installation of windows and doors and the framing of the framing, which are indispensable processes and are key to the carpentry phase. After the carpentry work, the walls are treated and painted.

The decoration process of the rough house mainly includes the above three stages. After all the stages are completed, on-site disposal is required, and after the waste is disposed of, the owner can purchase the lamps, switches, sockets, etc. At the same time, it is not possible to ignore the acceptance after the completion of the whole project, and then pay the balance after passing the acceptance, so as to avoid unnecessary disputes caused by the payment of decoration money without acceptance.