The turn signal on the right side mirror of the new Sega is broken, can I change it separately?

Hello! In this case, it is not possible to replace the turn signal on the rearside mirror alone, this must replace the right side of the reversing mirror assembly, and the cost is generally about 500.

Hello! After the turn signal of Dongfeng Citroen Sega is broken, you can directly replace it separately, and the local repair shop can do it.

This can be replaced separately, go to your local auto parts city, and then you can buy separate accessories. ** is around 50 yuan. So if you go to your local auto parts city and repair station, it's all assembly.

Hello, the turn signal on the rearview mirror of the new Sega vehicle can be replaced separately, under normal circumstances, you need to go to the repair shop to replace, the four S shop is generally to replace the assembly, the ** of this turn signal is about 80.

If it is only a transparent part of the turn signal cover, this can generally be replaced separately, you can go to the auto parts city or repair shop, it should be able to be replaced. If the entire plastic shell is broken and the base is damaged, then the assembly must be replaced.

This can't be replaced alone, you need to replace the assembly, you can refer to it.

Hello, this turn signal cannot be replaced separately, it needs to be replaced with the rearview mirror housing.

Hello, according to the situation you described, it is possible to replace the turn signal separately, and it is not expensive. You can go to the four-S shop, or the repair shop.

Hello, according to what you said, this turn signal can be replaced. You can go to a 4S shop or repair shop to replace it.

Hello, if the turn signal on the right reversing mirror is broken, you can go to the repair shop to replace a turn signal housing.

Some are sold online, and the 4S store may be a reversing mirror assembly.

1. The general indoor reversing mirror can be adjusted directly by hand, and when adjusting, it is necessary to adjust it evenly with both hands, and fine-tune it with a small margin. Generally, it can be adjusted to the front and back, left and right, and try to avoid frequent adjustment, otherwise it will cause the rearview mirror to shake. 2.

Some vehicles have buckles in the indoor mirrors, which need to be opened to adjust the mirrors, and after adjustment, buckle them to fix the mirrors. Note that before and after the buckle is fastened, the rearview mirror will move, leaving room for adjustment. 3.

How to adjust the outdoor rearview mirror. The outdoor reversing mirror of an ordinary car is manually adjusted, or there is a control lever at the inner glass, and the outdoor rear-reversing mirror can be adjusted after being pulled, and the control lever should be slightly adjusted when adjusting. 4.

If you are manually adjusting the outdoor reversing mirror, press and hold one side when pressing the lens, and adjust it gently, not too hard, otherwise the lens will be damaged. 5.Now the mid-to-high-end cars are electrically adjustable outdoor mirrors, so you must not adjust the lenses by hand, after finding the switch on the console, you can slowly use the button to fine-tune.

Hello, the sound of the vehicle reversing and seat belt is emitted from the steering wheel com2000, it is recommended to turn off the battery for 2 minutes and try it

It is recommended that you still find a professional, otherwise it is easy to have problems.

This thing is integrated with com2010, and it must be replaced together if you want to replace it, and the part ** is about 1300

Hello, it has a small plate on the side that can be removed, pry it down with a change cone and you will see the screws, just remove the screws.

You can go to 4S to change the steering switch.

Is there an instrument alarm prompt for self-test after power-on?

It is estimated that the line is short-circuited and burns the fuse, and the short-circuit problem should be checked in detail, and then the fuse should be replaced, otherwise it will be the same to see if there is water ingress in the part.