How to prevent water retention in the exterior mirror? How to keep the reversing mirror from getting

Hello, there are a few common tips to prevent car mirrors from getting wet on rainy days:

1. Dish soap: First choose a soft dry rag and wipe the rearview mirror clean. Pour a little dish soap or shower gel directly on the rag, wipe every corner of the rearview mirror, make sure that every corner can be wiped, remember not to get wet, and wipe until you can't see any traces of dish soap in the rearview mirror.

When you drive in the rain, you'll find that the rain doesn't get on the rearview mirror anymore.

2. Installation of rain eyebrows: The effect of this method is more obvious, and the cost of installation is not high, and it can be used for a long time.

3. Apply water repellent agent: it is divided into two types: smearing type and spray type, which can be directly applied to the rearview mirror to let the rain slip away naturally and keep the vision clear.

4. Soap or candle: evenly applied to the rearview mirror, and then wiped clean with a soft rag, the operation is simple, but it does not last too long.

5. Install rearview mirror heating: Some models can choose to install rearview mirror heating function, which can be dried after opening on rainy days to keep the rearview mirror free of water droplets and affect the line of sight. This method is the safest and most convenient, but at the same time it is the most expensive.

Method 1: Install a rain shield]**: Principle ranging from a few yuan to dozens of yuan:

The "rain shield", also known as the "rearview mirror rain eyebrow", is made of high-grade resin material, which can be bent arbitrarily and glued to the rearview mirror through special double-sided tape, the effect is like holding up a small umbrella on the rearview mirror. Pros and cons: If the rain falls vertically from the sky, it works well.

However, for the rain that falls obliquely, the effect is poor, which is the same as a person holding an umbrella vertically, and the rain that blows obliquely will still get people wet. [Method 2: Install a heated rearview mirror]**:

Hundreds of yuan to thousands of yuan principle: through heating, so that the raindrops can not stay on the mirror surface of the rearview mirror. When the rearview mirror is heated, the small condensed water droplets are quickly evaporated.

Pros & Cons: **Higher and requires a professional to operate. However, some also come with blue mirrors (i.e., when driving at night, even if the rear headlights shine on your car's rearview mirror, it will not look dazzling and play an anti-glare function), wide-angle (using multi-curved surface technology, a large field of view, and a more realistic image), etc., which increase the function and safety of the car.

Make a small hole under the rearview mirror, and it doesn't hurt to make it bigger.

1. Soap and toothpaste can destroy the tension of water when the water hits the glass, and when the water hits the glass, it can form a certain water film and maintain the clarity of the glass, but the method can only last for one or two hours.

2. Add a rain eyebrow on the rearview mirror, especially in rainy areas, usually the effect of light rain is good, and the effect of heavy rain is not obvious.

3. Apply water repellent in the rearview mirror, not only the rearview mirror, but also the side glass can also be coated with some, which can dispel water well.

4. Install an electrically heated rearview mirror to cope with light rain weather, which will be dried quickly, even if it can play a certain role in a larger rainy night. The disadvantage is that it is more cumbersome to modify.

One: the use of the original rearview mirror heating is the most effective. Two:

When it's about to rain, apply detergent to the mirror. Three: the mirror surface has been treated by automobile coating to achieve the effect of leaving no water stains.

Four: The mirror surface has been treated by car sealing glaze to achieve the effect of leaving no water stains.

The rearview mirror is made of a glass coating.

The waterproof method of the reversing mirror is as follows: 1. Try to destroy the surface tension of the water droplets, use dish soap or soap, they contain surfactants inside, this thing can greatly reduce the surface tension of the water droplets, and the rainwater is evenly attached to the surface of the rock glass after use, although there is water, but it does not affect the line of sight; 2. Waxing increases its surface tension to achieve the effect of lotus leaves, we all know that it is difficult to accumulate water droplets on lotus leaves, because its surface fluff greatly increases the tension of water droplets, and waxing on the glass can achieve the same effect, after waxing, the surface tension of water droplets increases dramatically, and the water droplets are gathered into particles as much as possible, and the adhesion on the glass is greatly reduced, and the vibration or air flow during driving can easily make the water droplets fall; 3. Install a rain shield, which is available on a certain treasure, which is relatively cheap and can play a certain role in retaining rainwater. It is a more common practice to install rain eyebrows on the rearview mirror, which is convenient and cheap, and the effect is more obvious, especially for car owners who live in rainy areas.

However, the rain eyebrow also has certain limitations, because in terms of style, the rain eyebrow usually has two kinds of external installation and internal installation. The outer side is glued directly to the rearview mirror, while the inner side is inserted into the gap between the rearview mirror and the frame.

There are several tips for waterproofing car reversing mirrors: 1. The first tip is to use detergents such as soap or dish soap. Cleaners contain surfactants, in which hydrophobic groups migrate water outward due to their physical properties, preventing the formation of water droplets.

It's also very easy to use, just apply it with soapy water or dish soap water, spray it on the rearview mirror, and let it dry. Although this method is very convenient, the long-lasting effect is very short, and the effect will be lost in about 2 days;

2. The second tip is waxing. When the water is transported on the waxy body, the internal cohesion of the water will be greater than the adhesion, and the water droplets cannot be gathered, and the principle is the same as that of the lotus leaf. Although it is also very simple to wax with cracked locust, because the wax is greatly affected by temperature, if it is not operated properly, it will affect the line of sight, so it is not used much;

3. Finally, it is natural to provide a lasting and reliable solution, which is waterproof spray. The principle of waterproof spray is also to use water-repellent groups to drive water, but the waterproof spray lasts longer and is more convenient to operate, which is welcomed by the majority of car owners. Even in rainy climates, the waterproof spray can immediately play a role in repelling water, which is very practical.

This little trick is also widely used by the majority of car owners and friends, a small bottle of spray, can be stored in the trunk, that is, the friends use that spray.

Millions of car purchase subsidies.

Tips for not sticking to the reversing mirror: soap, toothpaste, waterproofing agent, electric heating, waterproof film.

1. Soap

It is more practical to put a piece of soap in the car, before traveling in rainy days, the soap is evenly smeared on the rearview mirror of the car, after the soap hardens, wipe off with a towel, and the glass surface will form a layer of wax layer, which has good water repellency, which can effectively prevent the blurred vision caused by fogging and water droplets in the rearview mirror, and can also increase the fragrance and taste.

2. Toothpaste

The use of toothpaste is the same as soap, apply the toothpaste evenly on the rearview mirror of the car, wipe and rinse with a towel, can effectively prevent the problem of fogging the rearview mirror.

3. It is a waterproof agent

Buy and use special waterproofing agent, now the waterproofing agent on the market is generally divided into spray type and smearing type, the waterproofing agent will be evenly sprayed or smeared on the rearview mirror, the surface of the rearview mirror will form a protective film, this protective film also has good hydrophobicity, can effectively prevent the rearview mirror from fogging or hanging water droplets, to ensure that the rearview mirror is clear.

4. Electric heating

The rearview mirror can be equipped with electric heating, and the heating wire can increase the temperature of the mirror surface of the rearview mirror to effectively prevent fogging.

5. Waterproof membrane

The waterproof membrane of the rearview mirror has good hydrophobicity, which can effectively prevent rainwater from adhesion and avoid rain blocking the rearview vision, thereby improving the safety factor of driving in rainy days. The film of Qin Honglu has high definition, and it also has the functions of waterproof, anti-fog, dust-proof, anti-scratch, anti-fingerprint, etc., which can keep the mirror clear at all times, so as to relieve the trouble of driving in rainy days.

Hello The rearview mirror rain film has good hydrophobicity, which can effectively prevent rain from adhering and avoiding rain from blocking the rearview vision, thereby improving the safety factor of driving in rainy days. The high-quality film has high definition, and it also has the functions of waterproof, anti-fog, dust-proof, anti-scratch, anti-fingerprint, etc., which can keep the mirror clear at all times, so as to relieve the trouble of blurring the rearview mirror in rainy days. In this way, the rain film for the rearview mirror is still useful.

In addition, there are also other rainproof methods, such as: adding a rain shield to the rearview mirror, which can block the rain and prevent the rain from falling and hanging on the mirror surface; Or before driving in rainy days, use soap, evenly apply the soap on the rearview mirror of the car, after the soap hardens, wipe off with a towel, the glass surface will form a layer of wax, which has good water repellency, which can effectively prevent the rearview mirror from adhering to water droplets and mist.

In addition, the use of a special water repellent agent can also effectively prevent waterproofing. Now the water repellent on the market is generally divided into spray type and smearing type, the water repellent will be evenly sprayed or smeared on the rearview mirror, the surface of the rearview mirror will form a layer of protective film, this protective film also has good hydrophobicity, can effectively prevent the rearview mirror fogging and water droplets, to ensure that the rearview mirror is clear.