Tried it, but still can t screw it? What should I do if this valve doesn t move?

Tried it, but still can't screw it? It means that your strength is not strong enough.

Maybe the direction of the twist is wrong, change your thinking.

After eating, you still can't twist it, and in the case that you can't twist it, then you put some oil on it, and finally slowly lubricate it and drink it to flow.

If it's something too heavy, it won't be twisted. You can call someone to help, and multiple people will work together to help you transport you home.

If the screw is rusty, it can't be screwed. You can spray a little rust remover, shake the screw, and you can remove the screw.

If the screw is reversed, you can't remove it in the counterclockwise direction, you can rotate it in the clockwise direction and try it.

You can't screw anything. Is it a regular screw or a water pipe? You can use a pipe wrench, and generally the larger wire can't be unscrewed and you can use it. If it is an iron buckle, it is generally because it is rusty and cannot be twisted, you can add water to move back and forth for a while, and other screws can add some oil.

If it rusts, add some kerosene and soak it for a few days before trying.

Why don't you screw it, just say it can't be screwed, how can everyone help you, you can explain things clearly, and it will help you.

I don't know if you can't screw anything, you can find a professional to solve the problem for you.

You can first tighten it tightly, and then loosen it, the ordinary nut is tight in the clockwise direction, loose in the counterclockwise direction, and there are also reversed ones such as the fan blade lock nut of the electric fan, if the rust is soaked, the kerosene (engine oil) is soaked and then screwed.

I tried to twist it, you can find a strong force to help you twist it, if it still doesn't work, and then twist it in the opposite direction, some screws are reversed, if it's rusty, you can spray the screws to move ji.

If you can't twist it in one direction, try to twist it in the opposite direction again, it may be a reverse buckle.

You can ask someone with a lot of strength to help.

If it doesn't have much impact, it will be violently destroyed.

You can let someone with strength help you get it, if you really can't twist it down. Try twisting it in the opposite direction.

It's not rust, it's the water alkali that stuck the ball valve. This kind of valve will be opened and closed several times after a few months to rub off the generated water alkali, otherwise it will not turn if it is thick. Unscrew off the handle, use a live wrench to clamp and try to twist, back and forth in a small area, do not use too much force, otherwise the lever will be screwed and slipped, and it will be completely useless.

If you really can't screw it, you can only change the valve.

It is estimated that it is rusted to death, and it can't play the role of a switch, if you need to use it, turn off the main valve and reinstall it and replace it with a new valve.

Let's change the valve! It's rusty inside.

Answer 1: Before using heating, the filter should be cleaned once a year, first close the water inlet and return valves of the adjacent pipes, open the filter after installing the floor heating, take out and clean the filter, and check whether the filter is damaged or blocked. If it breaks, it needs to be replaced with a filter of the same specification. Disassemble as is, pay attention to the removal process of the filter, and make sure that no debris enters the tube.

2. The floor heating pipeline is cleaned once a year, the main pipeline circuit structure of the geothermal heating system is complex, the water supply pipeline is very long, and the temperature change will produce calcium and magnesium ion scale. It also produces sludge due to central heating, which can cling to the inner walls of the pipes for a long time if rust, bacteria, algae, etc. is not treated regularly, which can reduce the temperature of the geothermal heating system and cause failures. Therefore, it is recommended to regularly clean and maintain underfloor heating for at least 2 years, with a typical cleaning cycle of 2-3 years.

If you can't screw it, then press it to see, maybe it's not screwed?

If it's a small switch under the door, try turning the handle in the other direction.

If it doesn't work, I put my shoulders against the door and twist it again.

If you have a tool at hand, clamp it with a vice.

Dizzy,**Twist can't move.,Please explain the point.。

Wrap something on it to lengthen the torque and screw it again.

Find a pipe wrench stuck in the handwheel is to twist back and forth, the role of the two roses is: the lower one is to position the compass rod to prevent the compass from running away, the upper one is to seal it, and the lower one is pressed with a rubber pad or packing to prevent water from overflowing around the compass. It should be noted that the compass that is not easy to screw may be rusted after twisting.

You can scrape some pencil ends and put them in the keyhole. The end of the pencil contains graphite, which has a lubricating effect.

If you still can't twist it, it may be that the lock has been used for too long, and the key teeth or the pins in the lock are worn out, so try to twist it gently from different angles as much as possible.

There are still many such solutions, you can try to apply some lubricating oil to the key, or touch the graphite lead core in the pencil on the key, you can lubricate. If that doesn't work, change the key.

Add some oil to lubricate it, and it will be easier to drive.

The subject didn't express his understanding, I only replied like this, what kind of lock type can't screw the key? There are many reasons why the key can not be unlocked, some are rusty, some are broken, the subject can get some pencil Xiao put it in the keyhole to try to see if it can be unscrewed, if it really doesn't work, find a lock repair master to repair.

If it is unlocked, it can't be opened, the key can't be screwed, it may be rusty, put some oil in it, maybe it will be much better. If you screw it hard, you may break the key. If it really doesn't work, you can find someone to pick the lock.

The tongue and eyes of the lock do not match the key and cannot be screwed, see if the screws are loose?

The question is very unclear, I don't know what exactly you want to ask?

Don't worry, take your time, maybe your lock hasn't rusted for too long, just put some oil in the lock, and the key can be twisted.

You can use a hammer to hit the edge loose.

Move around, and then add some lubrication.

Remove after oil lubrication. Good luck with you.

work, remember to adopt.

The problem you mentioned is more special, there is no valve that can be screwed, and it will not be screwed after a while.

Unless you twist your head back, because quick answers.

The opening valve is limited on the valve, only the gate valve and the globe valve do not.

Solution: Use a live wrench or pipe wrench to unscrew the valve body gland, that is, there is a small nut under the handwheel, and there is a big nut under the handwheel, and the valve body is down, that is, the big nut, you can unscrew it once, don't unscrew it all, at this time you are twisting the handwheel.

Twisting to the left is on, and twisting to the right is off. After unscrewing and loosening to the maximum open, tighten the nut again, and then close it back.

If you can drain now, you are overblowing, and you twist it to the right. If the water doesn't come out and it is closed, you can twist it to the left with some force but not too much. No, you're removing the valve.

It's impossible to rust in a few minutes and you can twist it just now, which means it's stuck.

I really can't use it, so I have to replace it!

The valve is rusty, it is recommended to drop a few drops of oil and try again, and the oil for cooking vegetables at home can also be used.

It's a lost tooth. It is recommended to change one. The water valve accidentally ran out of water.

Take pneumatic tools as an example, each model of pneumatic torque driver is within the ability range, and the torque driver cannot be screwed should be the wrong choice when selecting the model, or the torque demand of the screw is beyond the capacity of the machine you are using, and you should buy a machine with greater capacity. If you screw the same screw, you can use it before, but now you can't use it suddenly, you should consult the original supplier in time to solve it. Therefore, it is best to find a professional supplier to recommend the tool.