How can the floor of the home decoration be clean

Hello! Follow these steps to deal with it:

1. Use a vacuum cleaner.

Vacuum the whole house, including walls and ceilings.

lamps and other places where they may be contaminated with powder (presumably sawdust);

2. Use an electrostatic mop (flat, electrostatic cloth) to gently drag to let the particles adsorb on the mop;

3. Use a non-dripping mop (the electrostatic mop has two pieces of cloth, and the other is a cleaning cloth) to clean the surface of the floor.

4. If there is glass glue.

On the surface of the floor, wipe it with a cheap "hand cream" and dry it with a damp towel after cleaning.

It only represents a personal opinion, don't spray if you don't like it, thank you.

Powder stains on the floor are a relatively common problem, but it is not an easy task to mop them clean. In order to solve this problem, we can consider and practice from the following aspects.

We can choose the right mop and mop cloth. For powder stains, a stiffer mop head removes the stain better. If you use a mop cloth with high water absorption, you can absorb powder residues more effectively and avoid secondary dust generation during mopping.

Before mopping the floor, you can use a wet and dry broom or vacuum cleaner to clean up. This removes most of the powder residue and reduces the hassle of mopping the floor. For corners or crevices that are difficult to clean, you can use a small brush to clean them.

When choosing a cleaner, it is advisable to choose a product that is specifically designed for floor cleaning. These cleaners usually have a good ability to remove dirt and do not cause damage to the flooring material. When using detergents, it is recommended to follow the instructions on the instructions and pay attention to the appropriate amount of use to avoid excessive use and residue.

If the powder stain on the floor is stubborn, consider using a special cleaning tool such as a floor mopper or steam mop. These tools clean the floor surface more deeply, completely removing stains and powder residue.

After mopping the floor, clean the mop cloth or mop head of the mopping machine in time. This will prevent stains from remaining on the mop and affecting the effect of the next use. In order to keep the floor clean and shiny, it can be waxed or waxed regularly to increase the dust and stain resistance of the floor.

To mop powder off the floor of your home, you can choose the right mop and mop cloth, use a broom or vacuum cleaner to clean it first, choose the right detergent, consider using specialized cleaning tools, and wax or wax regularly. By combining these methods, you can easily solve this problem and keep your floors clean and beautiful.

The above is the advice on how to mop the powder on the home decoration floor, I hope it will help you. If you have any other questions, please feel free to continue to consult!

Sweep the large amount of powder first, then use a vacuum cleaner to clean it, and finally mop the floor clean.

It is recommended to vacuum with a large vacuum cleaner first, and then wipe it out a little bit.

With the improvement of people's living standards, more and more families choose to lay solid wood floors on the ground in the process of home decoration, but the daily cleaning and maintenance of solid wood floors is a headache, so how to quickly and effectively clean and maintain their own solid wood floors?

1. Self-formulated floor detergent is affordable and effective.

In fact, you can also configure some simple detergents to maintain and clean the wooden floor, such as adding 450 grams of soda, soft soap and bleach and 2270 ml of water to a large pot to mix well and boil to half of the original volume, wait for it to cool and then clean the wooden floor with a hard brush.

Second, save time and effort to select refined salt.

Refined salt is very effective for clear egg traces on the board, you can sprinkle some refined salt, wait for about 10 minutes to clean, which not only saves cleaning costs, but also is too time-consuming and laborious!

Third, concentrated alkaline water to remove grease.

For grease stains on the floor, you can boil the aqueous solution of concentrated stone alkali first, cool it and then clean it. Immediately after that, you can sprinkle some hot water and bleach on the stained area and leave it in this condition for an overnight time before washing.

Fourth, the salad oil decontamination and brightening.

Salad oil is one of the items often used in daily life to clean floor stains, in the process of cleaning the floor, only need to add a few drops of salad oil in water, which can not only brighten the wooden floor, but also achieve the purpose of cleaning and staining.

5. Milk with vinegar for maintenance and decontamination.

For some common stains on the floor, you can add some vinegar to the fermented milk, which can not only remove the stains on the floor, but also keep the floor shiny!

Tips for maintaining wooden floors.

Before dealing with the stains on the wooden floor, use a clean broom to clean the dust in the room, then use rice water or a rag dipped in detergent to clean the local area of the stain, and finally use a semi-dry mop to clean a large area.

In order to prevent the growth of bacteria during the use of wooden floors, you can use a vacuum cleaner regularly to clean, remember that it is best to use a vacuum cleaner with a filter function, so that you can clean and thoroughly clean the dust and bacteria on the wooden floor.

There is also a very simple wooden floor maintenance and cleaning tips, wear soft wool cloth slippers during indoor activities, so that you can simply clean the floor during daily walking.

In addition to cleaning the wooden floor, it is also necessary to maintain the wooden floor. For example, solid wood flooring is prone to cracks in the cold winter, which is caused by the loss of water and shrinkage of the floor in winter, and regular solid waxing of solid wood flooring will effectively reduce the frequency of such situations.