How to make a homemade chair cover, how to make a chair cover?

In the past, people used to buy chair covers, but now many people will make their own chair covers at home, so what is the process of making chair covers? Let's take a look.

Measure the size of each small piece of the chair first, convenient for cutting fabric, of course, the size should be 5 cm more than the actual size, so as not to be nervous when sewing, so as not to reduce the size of the finished product in the end, the tool may be very simple, maybe a pair of scissors, a piece of powder, a tape measure can be, this is a simpler tool to make a chair cover.

After measuring it out by yourself, you should make a draft drawing, cut the size according to the draft drawing, and sew each corresponding square together, to put it simply, sew it into a set little by little, and make your own chair cover including cushions, cushions, pillows, coffee table tablecloths, dinner tablecloths, table flags, etc. Then you only need to do some small processing and check the details, and then tidy up and check and tinker. Once there are no problems, the chair cover is done!

In fact, it is not very difficult to make a chair cover, you only need to do it in the details, and you must also mark the sketch where it should be marked, and the size must be accurate, otherwise the effect will not be good. Friends who like to engage in small household arts still have questions about how to make chair covers or other small furniture, so you can practice more.

The above is the chair cover production process I introduced to you, I hope it can give you some help.

How to make a chair cover, don't throw away old clothes, make it into a chair cover to save money and be practical.

Preparation materials: old clothes, fillers, scissors, needles, thread.

<>6. After the chair cushion reaches the expected softness, start sewing the opening of this end, which can be sewn by the Tibetan needle method, the flat needle method, and the back needle method, as shown in the following figure

7. Sew the open completely, and you can see that a soft chair cover is complete. As shown in the figure below:

The chair cover is made as follows:

Preparation materials: cloth, cotton, scissors, rope.

Operation steps: Step 1: Prepare two pieces of round cloth with the same face as the chair, the same size and the same suit, a large piece of sandwich cotton, two cloth belts of the same length as the circumference, a rope with the same circumference, and a green cloth strip.

Step 2: Cut the sandwich cotton cloth of the same size as the plaid fabric, stack the plaid cloth - sandwich cotton cloth - plaid fabric in order, fix the position with a pin, and sew the sealing cloth feet. One strip of cloth is stacked with a plaid fabric-sandwich cotton cloth, fixed with a pin, and then sewn to seal the cloth foot.

Step 3: Wrap the rope around the green strip of cloth, fold it in half, and sew it onto the top of the round fabric. Fold the excess part of the green strip of fabric in half on the outside of the seam and sew it onto the fabric on the back, otherwise it will affect the line of the strip below.

Step 4: Fix the processed strips of fabric in the second step face to face with a pin on the processed round fabric, and then sew two pieces of fabric. When stitching, remember not to sew too deeply, otherwise the round fabric will become smaller and will not fit into the chair.

Step 5: The prototype of the chair cover has been basically completed, and the principle of not exposing the stitches is followed. The other strip of cloth is made of lace by folding and sewing at the same time, so there is no need to make a sandwich surface here, otherwise the chair cover will become too heavy.

Step 6: The long strips of fabric on the edge of the lace and chair cover are face to front, and the strips of fabric and the chair cover are sewn together. After sewing, the front seam is added to fix the position of the lace, so that the lace can be more natural and beautiful.

1. Proofing with non-woven fabric according to the original condition of the chair and start measuring the size.

2. Cut the thickness and lace of the side, the front and rear length of the side has just been measured, cut according to the size, the height is arbitrary, and it is determined according to the appearance. The proportion of lace is doubled, and a strip is added to the reverse side of the side thickness for fixing.

3. The bottom edge of the lace should also be edging, and the thickness of the side should be piping.

4. Then combine the side thickness and face, and the lace part-time job fold is more beautiful, of course, you can choose the way you like to discount.

5. In order to be more perfect, we press the line on the front and install the narrowest presser foot in the world, and the line is relatively thin.

6. The chair cover is basically completed, and then an elastic band is added to the fixed tease Zheng Dingtiao on the thickness, so that the corner of the chair can be buckled and will not slide. Such a stool cover is ready.

Benefits of the hood:

1. Dustproof and anti-fouling.

Many people buy a new chair and go home with a cover on it. One of the advantages is that it can effectively prevent dust and stains, even if there are dripping coffee, red wine stains or even oil stains, they can be directly removed and cleaned, without affecting the material of the chair itself, and there is no possibility of bleeding, which is very convenient to clean.

Second, high comfort.

If you are using a solid wood chair, the sitting feel may be on the stiff side, so the comfort is more limited. However, if a soft and thick cover is applied to it, it can transform the hard texture into softness, and it will feel more comfortable to sit.

If you sit on the chair at home for a long time, there will be obvious traces of old and the solid wood chair at home will be very hard, and it will feel too cold to sit on in winter, so what should I do? What I want to bring to you today is the practice of chair covers, let's see how much DIY makes chair covers to save money and be practical. Let's take a look at the introduction of the chair cover, so that the chair at home will look brand new and add warmth to the chair in winter.

A complete set of chair covers.

First, the wool is skillfully made into a chair cover.

Many people can knit sweaters, so you can make a chair cover for the chair at home, which is beautiful and practical.

First of all, prepare the materials: chairs, wool, knitting sticks for knitting wool.

1.Then you can start weaving, starting from the bottom of the chair, you can measure the estimated number of needles at the beginning, and then knit from the bottom up. After weaving to the height of the cushion, change the number of stitches and start knitting the back of the chair, and the number of stitches should be set according to the actual size of the chair.

2.Next, start weaving the front of the back of the chair, the cushions and the armrests. Finally sew them all together until the chair is completely covered.

Isn't it simple and beautiful, but the most important thing is to DIY and experience the fun. You can also weave some pockets or decorations on it, which is both beautiful and convenient. Although the woolen yarn looks coarse, it definitely warms your little home.

Second, the fabric is skillfully made of chair covers.

First of all, prepare materials and tools: a chair, nice fabric, ruler, scissors, scratching, needlework.

1.If you want to make a hard chair, then you can add cotton so that it will not wrinkle, and if it is a cushioned chair, you can do without adding it.

2.To choose a relatively large place as the production place, in the use of prepared scissors is best to be wavy lace cutting, cut out the edge of the cloth is wavy, so that the edge of the cloth will not be bloomed, and the requirements are not strict can be replaced by the selvedge.

3.Before cutting, measure the widest part of the chair back, the height of the back, the width of the upper and lower parts of the cushion, the vertical height of the cushion, and the size of the widest part of the cushion.

4.There are three main parts that need to be cut, the first is the part of the chair cushion, you need to pay attention to the width of the stitches, generally 5 cm more. The second is the back of the chair, if the length of the back of the chair is more than twice the length of the chair, by the way, leave a long strip of the length of the seat cushion on three sides, you can tie a bow on the back of the chair.

The third is the skirt part of the chair cushion, which can be pleated and has a moderate length.

5.Put the cut part on the chair and measure it to see if it fits.

6.Be sure to iron them all out before sewing, so that they will look better.

7.Sew the skirt part on the three sides of the chair cushion, and you can use bead needles to pin the vertical direction of the seam, so that the sewing is more neat.

8.Fold the back of the chair in half, leave the stitched part, sew it with the cushion part, and tie the bow to strengthen the digging and holding.

9.After sewing, it looks the same as in the picture, isn't it very simple?

10.In winter, you can also make a plush cushion and tie it to the back of the chair to add a lot of warmth.