What are the processes for gas pipeline installation

The installation unit must meet the following basic conditions: ; 1. Have the status of a legal person and hold an industrial and commercial business license; ;2. Have a quality system that meets the needs of pressure pipeline installation; ;3. The installation performance and installation capacity of pressure pipelines within the scope of application; ;4. The installation quality is qualified and the safety performance is reliable through the engineering project. For more information, please contact Nanjing Haixuan Enterprise Management Consulting****, products and services:

Pressure pipeline qualification management consulting Haixuan Enterprise Management Consulting (HXC) has always adhered to the concept of "professionalism, efficiency and win-win", and has provided high-quality and professional certification consulting services for many customers with a scientific, fair, standardized and rigorous working attitude, which has won good praise and has been widely praisedThank you!

Gas Pipeline Installation Steps:

1. The gas pipeline should be laid along the wall of non-combustible materials, and when it meets other pipelines, it should meet the following requirements:

1) When laying horizontally and in parallel, the net distance should not be less than 150mm;

2) When laying vertically in parallel, the net distance should not be less than 100mm, and should be located on the outside of other pipelines;

3) When cross-laying, the net distance should not be less than 50mm.

2. Under special circumstances, when the indoor gas pipeline must pass through the bathroom, toilet, hanging flat roof (vertical wear) and living room, the pipeline should have no interface.

3. The indoor gas pipe should not pass under the water bucket. When it is necessary to cross, a casing should be added, the diameter of the casing pipe should be two gears larger than the diameter of the gas pipe, the gas pipe and the casing should have no interface, and the two ends of the pipe sleeve should extend out of the side of the bucket 20 20mm.

4. After the installation of the gas pipeline is completed, the tightness test should be carried out, the test pressure is 300mm water column, and the pressure does not drop within 3 minutes to be qualified.

5. Gas appliances, electricity meters, and electrical equipment should be set in dislocation, and the horizontal net distance shall not be less than 500mm. When misalignment is not possible, there should be thermal insulation protection.

6. When the wall of the gas appliance is made of wood or other flammable materials, fire prevention measures must be taken.

7. The distance between the side of all kinds of gas appliances and the wall, water bucket, door frame, etc., and the distance between gas appliances and gas appliances shall not be less than 200mm. When two gas appliances or one gas appliance and the water bucket are arranged at right angles, the sum of the two sides of the wall shall not be less than that.

1. Preparation for stove installation.

Before the installation of the stove, it is necessary to determine whether the air source of the stove is consistent with the air source used, whether the trachea is in place, whether the trachea matches the stove, whether the size of the cabinet opening is consistent with the stove, and whether the cabinet has ventilation holes.

2. The trachea connects the stove and the gas source.

At present, the trachea is mainly divided into stainless steel hose and rubber pipe. Because the stainless steel hose is not afraid of rat bites, it has become a mandatory connecting pipe for natural gas companies because it does not age for ten years; Rubber pipes are generally used more for liquefied gas. When connecting the stainless steel pipe, you must pay attention to the gasket of the connecting port, if there is no gasket or the gasket is reversed, it will leak; The rubber tube must be connected to the corrugated part of the trachea fixed with a bayonet.

3. Check whether the trachea connection of the stove is leaking.

After the initial installation of the cooker is completed, check whether there is any air leakage in the external connection of the cooker, focusing on both ends of the gas source and the connecting pipe of the cooker. Sparkling water such as soapy water or laundry detergent water can be used. Apply it to the side of the trachea of the cooker, if there is air leakage, you can clearly see the bubble blowing, and ensure that the trachea connection of the cooker has no air leakage.

4. Put on the battery to check the stove fire cover, etc.

The cooktops all use No. 1 batteries. Generally, thermocouple cooktops only need 1 battery, and ion-extinguished cooktops require two batteries. Before starting the fire, the fire lid and stove frame of the stove should be arranged.

When placing the fire cover, put it one by one, and turn each piece to ensure that the rotation is smooth for installation.

5. Test the fire and adjust the damper.

Ignite the stove and twist it to the maximum fire position. Experience the smoothness of rotation and torsion, observe the intensity of the electric spark of the cooker, the position of the electric spark is aligned with the air outlet in the center of the cooker, and whether it is easy to ignite during the successful process of ignition. After ignition, observe the combustion, turn off the fire, and then light the fire several times to observe the ignition process.

After lighting the stove, observe the flame burning of the stove. Whether the flame color is mainly blue, whether the root of the flame is at the position of the vent of the fire cover, and whether the flame burns stably.

The head of the household should first choose a qualified and guaranteed natural gas stove, and then the head of the household should carry the purchase contract, the voucher for paying the fee, the name of the head of the household should be the same as the name on the payment document, as well as the natural gas stove certificate, instructions, etc., after the above is ready, bring the certificate to the natural gas service hall to go through the account opening procedures, and it is best to wait for the staff to install.

1. The user applies for opening an account in the customer service hall;

2. The handling personnel check whether the conditions for opening an account are met (whether the pipe network covers the community), and the following materials need to be provided and filled in for users who meet the conditions for installing and opening an account:

1. Resident users shall provide copies of valid certificates such as user ID card or household registration booklet; Industrial and commercial users shall provide a copy of the business license, a copy of the legal person's ID card and a copy of the operator's ID card; At the same time, the original shall be provided (the original will be returned after verification by the handling personnel).

2. The user fills in the application form for opening an account;

3. The user signs the gas supply agreement contract;

4. The user pays the account opening fee;

5. The handling personnel will issue the "User Manual", "Notice of Safe Gas Use" and "Application Form for User Installation and Use of Natural Gas" to users;

6. After receiving the information, the user must completely fill in the "Safe Gas Notice" receipt form.

3. Within three working days after receiving the completed application form, the biotechnology department will arrange technical personnel to conduct on-site surveys according to the application address to determine the size and direction of the pipeline and the location of the gas meter;

4. After the Biotech Department completes the entire construction process, the customer service hall will be notified for ventilation (about 3 working days);

5. The customer service hall will arrange personnel to complete user ventilation within 3 working days.

When choosing a gas water heater, you must choose a plug with a ground wire, that is, a plug with three corners, to prevent accidents in the kitchen during the summer thunderstorm.

The gas water heater must be installed at a sufficient distance from the gas meter, in principle, they are not allowed to be perpendicular to a line, and the horizontal distance needs to be kept at least 30 cm.

The smoke outlet of the gas water heater needs to be discharged directly in the open area outside, which means that the gas water heater must be installed on the wall closest to the outside.

The accessories for installing the water heater need to be provided separately, after all, many are laymen to buy things, when you don't understand, ask the sales consultant to help make a list, and then go to the hardware store to buy it directly according to the list.

If you don't prepare in advance, the installer will also have a belt, of course** must be slightly more expensive. It's up to you to choose.

There are many brands of gas water heaters, if it is for long-term consideration or buy a better one, the biggest point of attention of gas water heater is the way to ignite, after a long time, the gas water heater switch may not be able to ignite, so it is still a penny for the price.

2. Turn on the gas stove. The main purpose is to burn out the remaining gases. 3. Disassemble the old hose.

Loosen the screws on the hose and remove the throat card. 4. Install a new hose. After putting the hose on, push it up hard, the main purpose is to ensure that there are no gaps between the hose and the fittings, and then tighten the screws.

1.Sign the contract: The user signs a natural gas ** contract with the natural gas company.

2.Design scheme: The natural gas company formulates the design scheme of the natural gas pipeline elimination channel according to the needs of users and the site situation.

4.Construction preparation: The natural gas company dispatches engineers to conduct on-site surveys, determine the construction plan and construction time, and prepare the materials and equipment required for construction.

5.Construction: The natural gas company carried out construction according to the design plan, including excavation, laying pipelines, installing valves, connecting pipelines, etc.

6.Completion acceptance: After the construction is completed, the natural gas company will carry out the pressure test of the pipeline, leakage inspection and other acceptance work.

7.Ventilation: After passing the acceptance, the natural gas company will ventilate to the user and start supplying gas.

8.Maintenance: Natural gas companies regularly inspect, maintain and maintain pipelines to ensure safe operation.

When decorating a new house, the natural gas pipeline needs to be installed, but the installation process of the natural gas pipeline is more complicated, and there will be safety accidents if you don't pay attention to it, so before installing natural gas, you need to understand the installation process of natural gas, so what is the process of installing natural gas pipelines, and what are the installation specifications of natural gas pipelines? Let's take a look!

1. What is the process of installing a natural gas pipeline.

Before installing the natural gas pipeline, you should first bring your ID card and real estate certificate, go to the local gas company to apply for natural gas installation, pay the relevant fees and then you can get the natural gas payment certificate, and then the gas company will arrange the relevant construction personnel to install natural gas pipelines and gas meters and other equipment, and after the construction personnel install it, the owner only needs to use the gas water heater and other equipment to be used normally.

2. Specifications for the installation of natural gas pipelines.

1. In the process of installing natural gas pipelines, it is necessary to determine whether the burner and pipeline pressure of indoor natural gas equipment are consistent with relevant national standards, and check whether the natural gas pipelines, valves, pipeline accessories and other materials are qualified, and do not use materials with unqualified quality, so as to avoid safety accidents during use.

2. In the process of installing natural gas pipelines, the natural gas pipelines must be prefabricated and installed according to the design and construction drawings, and in the absence of clear design regulations for natural gas pipelines and fittings, copper pipes or galvanized steel pipes should be used for natural gas pipelines, and the pipeline pressure should be above 10kpa.

3. During the construction of natural gas pipelines, it should be ensured that the welds of the pipelines should not be facing the wall, and in the case that the welds of the pipelines are not obvious, they should be marked in advance, and when the pipelines in the wall are buried, special opening machines should be used for slotting, and the slotting position should avoid the load-bearing walls, beams and columns.

Summary: What is the process of installing natural gas pipelines is introduced here, once the installation of natural gas pipelines is unqualified, it is easy to cause safety accidents in the process of use, so we must pay attention to the installation of natural gas pipelines. I hope this introduction can help everyone.

The process of Anlu rushing and installing natural gas pipelines is pro! Hello, I am happy to answer for you<> the rubber process of installing natural gas pipelines Before the installation, we have to bring our ID cards and real estate certificates to the local gas company to apply for the installation of natural gas, and after paying the relevant amount, we can get the payment certificate for natural gas. Then the gas company will arrange the relevant staff to help us install natural gas pipelines, weather meters and other devices in person, and after the construction personnel have installed the beams, the owner only needs to use the gas water heater and other household appliances to see if it can be used normally.

Hope mine can help you <>

Do you have any other questions?

Gas pipeline installation is a very important project, involving safety, energy saving, comfort and environmental protection. Here are the general steps for gas pipeline installation:

1.Planning: Before installing a gas pipeline, a detailed plan of the installation site is required. This includes determining factors such as installation location, size, ventilation, and drainage.

2.Design: According to the plan, the layout and form of the gas pipeline need to be designed. It usually includes the layout, pipe diameter, length, branches, interfaces, etc. of the gas pipeline.

3.Sampling: Before the installation of the gas pipeline, the gas needs to be sampled to detect the composition and concentration of the gas to ensure the safety of the gas pipeline.

4.Construction: After the installation of the gas pipeline, construction is required. This includes installing gas pipelines, commissioning, connecting gas valves and switches, etc.

5.Acceptance: After the installation of the gas pipeline is completed, the gas pipeline needs to be inspected to ensure the integrity, safety and reliability of the gas pipeline.

6.Maintenance: Gas pipelines require regular maintenance and inspection after installation to ensure the proper operation and safe use of gas pipelines.

During the installation of gas pipelines, relevant safety standards and regulations need to be followed to ensure the safety and reliability of gas pipelines. At the same time, high-quality gas pipeline materials and equipment need to be selected to ensure the durability and safety of gas pipelines.

The installation of gas pipelines should be practical and good-looking, so you have to pay attention to the precautions, what are the precautions for the installation of gas pipelines? Today, PCHOUSE will answer them for you one by one.

1. The indoor gas pipeline should not cross under the water bucket. When it is necessary to cross, a casing should be added, the diameter of the casing pipe should be two gears larger than the diameter of the gas pipe, the gas pipe and the casing should have no interface between the branches, and the two ends of the casing should extend out of the side of the bucket 20mm.

2. When co-erecting and laying with the pipeline transporting corrosive medium, the gas pipeline should be erected above. For parts that are prone to air leakage, oil leakage, and corrosive liquid leakage, such as flanges, valves, etc., protective measures should be taken on the gas pipeline.

3. Pipelines, pipe fittings, valves, etc. should be inspected according to national standards; Sweep before installation to ensure cleanliness; If the pressure is concealed and the ventilation is very convincing, this is often ignored, and it is an important measure to ensure safety and no air leakage, and the pipeline shall not be harmed during concealed construction.