Wall paint modern water paint : Can the wall be wiped with a damp cloth if it is dirty?

The stain removal method is also different for different bai on the wall.

Crayon stains. The crayon stains on the wall are very indecent, you can cover the stains with flannel, iron a few times, the crayon oil will melt when it is hot, and quickly wipe the dirt off with a cloth. This way the masterpiece will be easy to dispose of.

Paint. Apply a few drops of detergent to a rag and put it on your finger to wipe the stains on the wall repeatedly, and finally wash it off with clean water.

Grease. Blot the grease with a paper towel, then cover the grease with a piece of paper and press it on with a warm iron (turn off the power) to blanch the paint thoroughly. If there is any residue, it can be washed off with a detergent.

Cigarette burns. Apply the cleaner to a soft brush and wipe gently.

Dirt around the light fixture switch. Dirt around the light switch can be wiped off with an eraser. If the dirt is large, it can also be wiped with raw wheat rings or peeled bread. Be gentle so as not to damage the surface of the wall.

Hardened candle traces. If there are hardened candle marks on the wall, it is best to carefully scrape them off with your fingernails rather than with a knife, and then use a small cotton ball soaked in alcohol to clean the stains.

Pencil marks. Scrub with a soft cloth dampened with detergent.

The scrubbing resistance of the modern water paint produced by Guangdong Modern Paint is very good, especially the Han Qi easy to scrub the deodorized interior wall paint, and the scrub resistance is up to 3000 times.

If the contaminants are not dry, wipe them off with a damp cloth dipped in detergent before they are dry. Even if it's dry, it can be wiped off in most cases.

When it comes to wall decoration, it is natural to use paint, the types of paint are also diverse, generally most people will use water paint to decorate our home, water paint wall makes the room more bright and lively, but with the extension of decoration time, the wall will inevitably become dirty, then, next, take you to take a lookWhat to do if the water paint wall is dirtyand the way to dry the wall with water paint.

1. What should I do if the water paint wall is dirty?

1. Detergent If there is a small amount of dirt on the latex paint wall, you can choose a detergent. In addition to washing dishes, detergents can also clean latex painted walls. By removing the stain, you can pour the detergent onto a damp cloth and gently wipe the walls.

2. Fine sandpaperUse fine sandpaper to gently wipe the dirt on the ground, and it will be cleaned soon. After gently removing the stain with sandpaper, remember to apply a layer of shoe polish to the floor. This method is very practical and simple, but it is not a long-term solution after using sandpaper.

Everyone should be as careful as possible.

4. If the precipitated calcium powder is dirty and the above-mentioned detergent is no longer useful, you can apply some powder head material, which can react with the stain, and then gently rinse the precipitated calcium carbonate with fine sandpaper. friction, so latex painted walls can be brand new!

5. Potassium bicarbonate dilute solvent When we use a diluted potassium bicarbonate solution to solve the problem of "when the latex paint on the wall gets dirty", the dirt on the wall is more difficult to clean, such as tea stains, beer stains and coffee stains. After cleaning, it should also be rinsed again with water to ensure results.

Second, the drying method of water paint wall?

1. Natural drying, natural drying has the advantages of simple method and universal application, but at the same time, it has the defect of slow drying speed. Under natural conditions, temperature, humidity and wind speed are variable, and the drying speed and film-forming quality are unstable. If the coating is easy to turn white and dry slowly under the conditions of high temperature, high humidity or high humidity.

At low temperatures, the drying rate is slow; Especially under 5, water-based coatings are difficult to form films. These are all important reasons for limiting the application of water-based coatings.

2. Hot air drying, hot air drying is a heating and drying method that uses the principle of convection, takes the hot air with a temperature of 40 60 as the heat carrier, transmits the heat energy to the coating on the surface of the workpiece, and the coating absorbs the energy and solidifies it into a film. Electricity or steam is often used as the heat source, the air is heated first, and the heat is transmitted to the surface of the coating by the hot air through the convection mode, so that the coating can be dried quickly. The hot air drying process can significantly speed up the drying speed of the coating, and has the characteristics of strong compliance, which is a more commonly used drying method.

3. Microwave drying, microwave refers to electromagnetic waves with a wavelength of 1mm-1m and a frequency of 300MHz-300GHz, with penetration, and the commonly used microwave frequency is 915-2450MHz. Microwave heating applies the principle of dielectric loss, while the dielectric constant of water is much greater than that of dry matter, and the vast majority of the energy released by the electromagnetic field is absorbed by the moisture in the paint.

The above is all the content about what to do if the water paint wall is dirty, and you must have some understanding of what to do if the water paint wall is dirty.