After the phone memory card is formatted, the phone does not recognize the problem!!

In addition to the files created by the mobile phone on the memory card, there are some hidden files in addition to folders such as ***, melogy, picture, photo, video, etc., which is equivalent to the system that allows the mobile phone to identify information.

Under normal circumstances, the formatted card, put it into the mobile phone, set the storage location in the mobile phone as the card, it should be automatically written from the new, the landlord checks the relevant information settings in the mobile phone, some of them will affect the card.

If you can find the card but can't recognize the contents inside, you can format the card once with the phone itself (not the phone).

You can also borrow a recognizable card to check all the files in it, including hidden files and hidden files of the system.

The landlord can also take the card to the person's mobile phone to see if it can be recognized and create a file, if it does not mean that there is a problem with the initial formatting process, it is recommended to format it from the new, and the format should not be selected NTFS format.

It is recommended to use a mobile phone to format the card, rather than using a computer to format the card, if you use a computer to format the mobile phone, you should ensure that the format partition format you choose can be recognized by the phone, for example, you choose the FAT format to format the card again.

There are two forms of mobile phone memory card formatting, there are two kinds of FAT and TFT (it should be like this, anyway, I remember that there are two), if one does not work, you can change the format to the other. But it seems that FAT formatting takes up more memory space, or what?,You just use TFT.,Mine is FAT now.,I'm ready to change to TFT format.,It's a lot of space**,Hehe.。

Mobile phones can only generally only recognize the FAT format, you can use the mobile phone format or the computer use the FAT format! There shouldn't be any problem!

1.First of all, your card can be read by the computer, which proves that there is nothing wrong with the SD card. Connect the SD card to the computer and format it, select "FAT". Insert the SD card into the phone and see if it can be read out normally. (Try "fat32" and then "fat").

Come to me, the problem will be solved immediately Hehe

If the contact area is dirty, wipe it.

It's the drive folder that comes with the card is broken, find a maintenance person to get it.

Or change your card.

I hope you'll adopt it.

There's no way, you just change it

The memory card is broken, only to replace it, mine was before.

USB flash drive digital card mobile phone card:

First of all, you need to confirm whether the SD card is good, and you can try it by replacing it.

1.Connect the card reader to the computer and see if the drive letter capacity is good.

2.If it doesn't work, you can try another computer or card reader. If it still doesn't work, it may be that there is a problem with the card and it has nothing to do with the machine.

3.The machine changes to another good card, try to see if it still shows this problem. If it is still, it proves that there is no problem with the card, but the machine settings or somewhere are damaged, need to be repaired or whatever.

The card cannot be repaired, if there is data, it can be recovered.

USB flash drive digital card mobile phone card: "prompt formatting", "unable to open normally","The device is not working properly"：

This situation is that there is no secure deletion during use, and after directly unplugging it, it will become "Prompt formatting" "Unable to open normally" "Device is not normal" "0 bytes" cannot be opened.

There are two types of situations.

1. Due to the sudden pull out of the U disk digital card mobile phone card, the loss of the FAT damage prompts insertion into the disk or formatting. In this case, it would be good to format the ** software on the Internet, such as diskgenius. If it doesn't work, try it with mass production tools.

2. Hard fault: due to sudden unplugging, the voltage instability may cause damage to the sperm element or burn the chip. Caused by the failure of the U disk itself such as crystal oscillator virtual welding.

In this case, I recommend that you find a professional data recovery company, or a USB flash drive repair company to try to repair the general recovery ** in about 200-300. Don't try to unpack the shell yourself, if there is a hard failure, you need to polish the memory card to extract the essence to recover, then 3000 up, don't try it yourself to avoid aggravating the failure. If you don't have important data, I'd suggest you switch it out!

If you have any questions, you can ask them, I hope to help everyone

You can use a professional formatting tool on the web, or use a dos command.

Feel free to ask.

Mine too, can't be formatted, who's going to help us.

There's a problem with the card, it's time to change it.