When buying a log table, is it better to have a whole board or a splicing board?

Laminated timber is sometimes referred to as finger joint board and splicing board, which is made of splicing of multiple wooden boards, and the upper and lower boards are no longer glued to the plywood, and the splicing method is similar to the cross butt of the fingers of two hands, so it is called a finger joint board. The amount of glue used in the finger joint board is very small, and it is an environmentally friendly board.

Of course, the whole board is good. The log of the whole board must be made of the tree of the table is very large, it should have grown for many years, the quality of the table without splicing must be good, and the time used will be very long, so it is better to use the whole board of the table.

Buying a log table is obviously a priority to buy a whole board, after all, the frequency of use of this table is so high, for some solid wood sitting posture, the whole board is better than the version of the plate, because the whole version is more beautiful. And the whole board is not so easy to break in comparison, the whole board is integrated, of course, there is no splicing gap, so this is also very strong, of course, the whole board of ** will generally be more expensive, after all, the price is a penny, this undoubted thing comes, it is understandable.

As for the splicing board, you need to look at the material of the wood, the solid wood furniture with good material, and the structure of the splicing board is relatively stable, even more stable than the structure of the whole page. So you can think about it according to your budget.

Personally, I think the splicing is better, it does not take up space, it is easy to move, and the parts can be replaced if it is broken.

The whole board is good. Because, if the processing technology is done properly, the whole board is better than splicing in terms of stability, durability, appearance and other aspects.

It can be seen from the fact that the same kind of wood can be two or three times worse than the splicing.

But there are a few things that you must pay attention to when it comes to whole panel furniture:

1.Wood must be accurate, I have been tired of saying many times on Zhihu, North American black walnut and South American black walnut really have no dime relationship, ** on the difference is several times, don't make a mistake.

2.The whole panel furniture has extremely high requirements for the drying process, and it is best to air dry naturally for 2-3 years, and the possibility of cracking in the later stage of the kiln-dried process will be a little greater.

3.Thickness, the whole board is recommended to be more than 5cm thick, otherwise it is easy to deform after long-term use.

In the end, there is no guarantee that solid wood furniture will not crack, but it can only be said that the possibility of cracking is minimized by better processes, if the solid wood furniture is left in an extremely dry environment for a long time.

Selling log tables is of course good for whole boards. The structure of the whole board is clearer, it looks better, and it is more expensive. The splicing is likely to cause the desktop to be unsightly, and there will be splicing gaps. Therefore, it is better to buy a log table to buy a whole board.

Hello, it's a table to buy logs, of course, it's better to have a full page, because if it's spliced, in fact, it's already dropped a lot, and it's more difficult to get a full page, so it's going to be a little higher.

Of course, the log table is a whole board, the whole board has no seams, it is made of whole wood, so it is more durable, and the splicing is spliced with fragmented wood and glue, which may be the leftovers of wood, so it is better to have a whole board.

Personally, I think it's better to buy a log table or a cutting board, because the log table of the cutting board is stronger, and it is much more than the splicing one, because I personally feel that this is the case, I originally bought a spliced log table, which is not too strong, so I will buy a full version of the log table in the future, because I feel that it is of good quality, and it is also relatively firm, very practical at home, and the service life is relatively long.

Buying a log table is a full page, better, because it is more solid, and the texture is more perfect, so when buying a log table, try to choose a long board instead of a splicing board, of course, the full page is more expensive, but the quality is indeed there.

If you buy a log table, it must be good to buy a full page, there should be few people will buy a splicing board, the splicing board is not firm, and for the table itself, there are many people in the traditional concept of the splicing board is not able to understand or have no way to contact, they are mainly practical, certainly not a color.

The whole board is good. Because you don't know what the spliced board is, it may be wood chips, or it may be other materials, and we laymen can't see it at all. Therefore, it is not as good as the whole board, and at a glance you can see that it is a piece of wood.

Of course, the log table is better than the whole board, indicating that it is really solid wood, and it is also more environmentally friendly, the splicing board is relatively cheaper, and the splicing needs to use a lot of glue, and the environmental protection coefficient cannot be guaranteed when used.

Of course, the log table is full-plated, which is better, because it is full-boarded. It's a whole piece of wood. It's done, and then the splicing board is the kind of small bits and pieces, or there is no whole version of the scorpion style.

If it is splicing, there must be glue in the middle, and glue will affect the overall quality, so try to choose the whole wooden table.

Of course, the log table is good for the whole board, especially the mahogany furniture, and the whole board is more valuable than the splicing. The whole board is made of logs, and the splicing is that the plank is not big enough to connect some small boards through glue.

It is better to buy a log table that is a full page. Because there are no splicing seams on the whole log table, it can be guaranteed that the log table will not be deformed and there will be no cracking of the splicing seams. It can ensure the excellent quality of the log table, for reference.

The whole piece is good, the whole piece is convenient, and it is large, and there are gaps in the splicing.

Of course, it is better to buy a log table than genuine splicing, because the log is strong and durable after all. On the one hand, it is glued too much, which is not conducive to environmental protection, and on the other hand, it is not as strong as a log.

The whole board is good, because the whole plate is more beautiful; In the case of the splicing board, you need to look at the material of the wood, the solid wood furniture with good material, and the structure of the splicing board is relatively stable. The whole board is better than splicing in terms of stability, durability, appearance and other aspects.

The solid wood table of the whole board is definitely better than the plywood, because the adhesive or glue will be used in the plywood, and these chemicals are very easy to release harmful gases such as formaldehyde, which can bring harm to people's bodies.

Buy a log table, of course, it is good to have a whole board. Because the whole board of the log table, both strong and durable, environmentally friendly and pollution-free, the spliced table due to the splicing, the integrity is not as good as the whole board table, plus in the splicing process will use a large amount of glue for bonding, glue contains a large number of toxic substances, very harmful to the human body, so it is very unenvironmentally friendly, but the whole board of the log table is a little higher than the spliced log table.

When buying a log table, you still have to use a full version, which is stronger and more durable, and it also looks more atmospheric and beautiful than the spliced one.

The whole board of the log table is better than the splicing board.

The whole board is more solid and beautiful, and the stability is higher.

The desktop of the splicing board is generally thinner and can be easily damaged.

When buying a log table, try to make the whole board better.

The whole board of the log table, the overall bite force will be stronger, more practical.

If it is spliced, it is relatively not original and prone to some problems.

Buying a log table, of course, is good for the whole board, so the whole board will be more expensive than the spliced version.

It is of course better to buy a log table with a whole board. Because of the spliced solid wood table, the splicing is easy to crack, and the use time is relatively short.

When buying a solid wood table, the whole board is better than the splicing board. The whole solid wood table has a good appearance and a solid structure. The disadvantage is that it will be higher than the solid wood table of the splicing board. The appearance of the table of the splicing board is slightly worse, and the structure is not as strong as the whole board, but it will be cheaper.

Summary. It depends on the quality and craftsmanship of the solid wood table that is spliced. If these solid wood tables are made of high-quality solid wood and fine craftsmanship, then the spliced solid wood tables are of very high quality, strong and durable, making them an excellent piece of furniture.

In addition, the spliced solid wood table has a unique design, which makes the home space more fashionable and beautiful, and brings a different feeling to the home environment. All in all, a solid wood table is a great piece of furniture and worth buying.

This is based on the quality and craftsmanship of the solid wood table that is spliced. If these solid wood tables are made from high-quality solid wood and fine craftsmanship, then the spliced solid wood tables are of very high quality, strong and durable, making them an excellent piece of furniture. In addition, the solid wood table with jujube has a unique design, which makes the home space more fashionable and beautiful, and brings a different feeling to the home environment.

All in all, a solid wood table is a great piece of furniture and worth buying.

Can a tea table of 27,800 yuan last long?

It depends on the material and craftsmanship of the tea table. If the table is made of high-quality raw materials and high-quality craftsmanship, it can still be more durable. However, if the table is made with inferior materials and workmanship, it may be less durable, and its durability will be reduced.

Therefore, when choosing a coffee table, the quality should be carefully checked to ensure quality and durability.

This is the top and bottom of the tea table, I want to know if this kind of spliced tea table is durable?

The pro is durable.

The bottom is already cracked, and the top has been open for a long time.

Yes, the solid wood splicing tea table may crack if it takes a long time. If the oak solid wood panels are not properly handled, they may be deformed due to environmental changes. If the humidity is too high, it will cause deformation of the wood for a long time because the wood is easy to absorb moisture, which will cause cracking.

If the humidity is too low, the wood will become dry and will also cause the wood to crack. Therefore, in order to ensure the service life of the solid wood splicing tea table, the humidity of Liang Xiaoyuan should be avoided from being too high or too low, so as to avoid wood cracking.

Is the price of 27,800 yuan high, a table and five chairs.

This**For a table and 5 chairs, it is a more reasonable type of trick**. This kind of table and chair is generally made of wood and has a special process, so it will not be too low. Tables and chairs of different materials and designs are also different, for example, wooden chairs can choose solid wood width and height or fiberboard, solid wood will be higher, and the table top can choose different kinds of wood, and the quality and quality are not the same.

Therefore, two thousand seven or eight hundred yuan can buy a table and five chairs, but it also depends on the choice of material and design.

Click Order Management, click on Reviews, and you can rate it.

Pro, there is no other problem, please end the order.

Summary. Solid wood multi-layer boards are better. Solid wood finger joint board uses more wood, and the use of plate adhesive is relatively less, the right solid wood finger joint board is spliced by a plurality of wooden boards, up and down no longer stick to the plywood, because the vertical wooden board between the use of jagged interface, similar to the fingers of two hands cross docking, so called finger joint board.

It is used for furniture, cabinets, wardrobes and other high-quality materials. Multi-layer solid wood boards are made by hot pressing of three or more layers of veneer or thin plank. Splints are generally divided into six specifications: 3 centiplate, 5 centiplate, 9 cleat, 12 cleat, 15 cleatboard and 18 cleatboard (1 cm is 1mm).

Multi-layer solid wood boards will use more adhesive than solid wood finger joints.

What does solid wood puzzle mean.

Hello, solid wood panels and multi-layer solid wood, multi-layer solid wood is good.

Solid wood multi-layer boards are better. The solid wood finger joint board uses more wood, and the use of plate adhesive is relatively less, the right solid wood finger joint board is spliced by a plurality of wooden boards, up and down no longer stick to the plywood, because the vertical wooden board between the use of jagged joints, similar to the finger cross butt of two hands, so it is called the finger joint board. It is used for furniture, cabinets, wardrobes and other high-quality materials.

Multi-layer solid wood board is made of three-layer or multi-layer sedan veneer veneer or thin board glued and hot-pressed. The splint is generally divided into six specifications: 3 centiplate, 5 centiplate, 9 centiplate, 12 centiplate split car key, 15 centiplate and 18 centiplate (1 centi, that is, 1mm). Multi-layer solid wood boards will use more adhesive than solid wood finger joints.

Which is good for solid wood splicing and solid wood ecological board Hello It must be that the solid wood splicing board is better, more durable and durable, and relatively high. Solid wood knuckle board is a kind of board made of small pieces of solid wood using a special splicing machine through the splicing of the board finger groove, which has the characteristics of environmental protection, high strength and small deformation. In Europe, solid wood finger joints have been widely used in the beam-and-column structures of houses and bridges.

Moreover, compared with the sticker particleboard and veneer board that we use in a large number of cabinets now, solid wood knuckle board has the advantages of extremely low formaldehyde emission, beautiful wood grain, and durability.

Solid wood flooring with an artistic effect of stitching.

Here is the encyclopedia of hardwood flooring.

Solid wood splicing board is made up of several relatively small solid wood boards, which are spliced into a whole large solid wood board according to a certain splicing method.

There are a variety of splicing methods for solid wood splicing boards, which are roughly divided into the following types:

1. Flat jointing method, that is, the joint surface is planed into a straight and smooth surface, and combined with the help of adhesive. This panel method is simple and has tight seams, and is a commonly used panel method for furniture;

2. The stepped surface splicing method, also known as cutting and splicing, is to plane the joint surface into a straight and smooth surface in a stepped shape, and splice it with the help of glue;

3. Groove tenon (spring) splicing method, also known as tongue and groove splicing, is to cut the splicing surface into a right-angled groove (spring) or tenon groove, and then with the help of adhesive for jointing;

4. Toothed groove tenon splicing;

5. Strip splicing method;

6. Screw splicing method;

7. a wooden pin splicing method;

8. Wear and tie spelling;

9. a sling connection;

10. bolting;

11. splicing metal connectors;

12. Finger-shaped splicing: that is, the two ends of the wood are processed into toothed tenons for gluing.

Solid wood splicing boards are generally spliced with toothed splicing, flat splicing or stepped surface splicing.