How to change an artificial gas stove to a liquefied gas stove

Replace the ignition assembly and furnace head (including the three key components of the ejector, the flame distributor and the fire cover). Except for the firearms that can be shared, everything else has to be changed.

The problem is that the caliber of the fire holes is in the micron range, and it cannot be changed. There are accessories on the market, but the load design and principle are different, and the caliber of the sprinkler, fire hole, and even the assembly spool nozzle is also very different.

It can barely be changed, and it is still a defective product after the change.

For example, if you buy a gasoline car and now you suddenly want to burn diesel, the best thing to do is to replace the engine. The engine accounts for 10-15% of the cost of the car.

But the combustion system accounts for more than 50% of the cost of the cooktop. It includes the ignition assembly and the furnace head (including the three key components of the ejector, the flame distributor and the fire cover). Except for the firearms that can be shared, everything else has to be changed, the question is, the caliber of these fire holes is in the micron level, have you changed it?

Some say that there are accessories in the market. It's also right or wrong, with the different load design and principle, the caliber of the nozzle, fire hole, and even the assembly spool nozzle is also very different, who has a precision control machine tool, who has a calculation model?

Change and change, it can only be defective. Losing a little money is a small matter, but long-term health damage is a big thing.

The core study of gas appliances is its long-term chronic effects.

Don't change it, the inlaid liquefied gas stove basically can't be changed, and the accessories are different. The pressure of liquefied gas is not the same as that of artificial gas. You'd better exchange it. Save trouble, and don't worry about safety hazards in the future.

How to change the liquefied gas stove to the natural gas stove is as follows;

Liquefied gas stove to natural gas stove: 1. First find the nozzle installed on the valve, and then disassemble the gas stove panel with a screwdriver.

2. Directly remove the nozzle with a suitable wrench or pliers, and expand the nozzle to a suitable size.

3. Install the nozzle to the original place and tighten it, and test the nozzle with a lighter to test the leakage. Natural gas is a multi-component mixed gaseous fossil fuel, the main component is methane, and a small amount of ethane, propane and butane, no waste residue and wastewater are produced after combustion, compared with coal, liquefied gas and other energy sources have the advantages of safe and clean use.

Liquefied gas generally refers to liquefied petroleum gas. Liquefied petroleum gas (LPG) is a colorless volatile liquid obtained by pressurized cooling and liquefaction of natural gas or oil in an oil refinery. It is very susceptible to spontaneous combustion, and when its content in the air reaches a certain concentration range, it can meet an open flame.

Natural gas refers to all gases that exist naturally in nature, including gases formed by various natural processes in the atmosphere, hydrosphere, and lithosphere (including oilfield gas, gas field gas, mud volcanic gas, coalbed methane, and biogenerated gas, etc.). And people have long used the term "natural gas.""The definition is a narrow definition from the perspective of energy, which refers to a mixture of warp and non-warp gases naturally contained in the formation. In petroleum geology, it usually refers to oilfield gas and gas field gas.

Its composition is mainly warp and contains non-meridian gases.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

OK. The main component of natural gas is methane, which requires less oxygen and more air when burning, so its gas outlet is smaller and the air inlet is larger, and the main component of liquefied gas is hydrocarbons and alkenes with more carbon, which is just the opposite of methane when burning, so its gas outlet is larger. The biggest difference between the liquefied gas stove and the natural gas stove is that the aperture of the nozzle of the liquefied gas stove is millimeters, and the aperture of the nozzle of the natural gas stove is millimeters.

Steps of changing liquefied gas stove to natural gas stove: 1. Go to the hardware store to buy millimeter nozzles and corresponding tools for natural gas. 2. Remove the millimeter nozzle on the liquefied gas fiber hood furnace, reaming the hole by hand with a tool, and change the aperture to millimeters.

3. Install the purchased nozzle to the position of the original nozzle. 4. Empty the gas in the original pipe, and then connect the pipe to dust, check whether the connection is tight to prevent air leakage. 5. Use the modified natural gas furnace to see if there is any abnormality.

Kiss, <>

We're glad to answer your questions! However, the gas stove is changed to a liquefied gas stove: to change the natural gas stove to a liquefied gas stove, the first thing to solve is the nozzle problem, you can go to the liquefied gas market to buy a nozzle for liquefied gas.

Open the screws of the gas stove and replace the nozzle with the nozzle of the liquefied gas stove to use liquefied gas. Extended information: Liquefied gas stove use and operation specificationsLiquefied gas stove is one of the basic necessary conditions for hot pot. It is composed of a liquefied gas tank, a stove, a pressure reducing valve, a rubber tube, a pipe clamp, etc.

1. Routine inspection before the market opens: 1. Check whether the liquefied gas in the liquefied gas tank is sufficient; 2. Check whether the rubber tube is aged, cracked, damaged, whether there is any possibility of being baked, whether the interface at both ends of the rubber tube is loose, whether the pipe clamp is clamped, etc. 3. Check whether the rubber pipe and pressure reducing valve are leaking, and if you find a leak, you should ventilate immediately.

It is strictly forbidden to approach all kinds of fires to avoid fires or accidents. 4. Check whether the liquefied gas stove is blocked. 5. Ignition test to observe whether the flame is normal.

2. Ignition inspection can only be ignited after confirming that all parts of the liquefied gas cooker are fine. Turn the valve on the liquefied gas tank counterclockwise, open the valve switch on the liquefied gas tank, extend the ignition gun into the liquefied gas stove at an appropriate distance from the jet port, and then slowly open the valve switch on the liquefied gas stove, press the button on the ignition gun to ignite the liquefied gas, and adjust the combustion flame. When the liquefied gas stove is burned, the inner flame is blue, the outer flame is orange-red, the inner and outer flame should be clear and uniform, and the flame height is generally 15 cm.

3. When turning off the fire, the main valve on the liquefied gas tank should be closed first, so that the liquefied gas in the pipe is completely burned, and then the valve on the stove should be closed, so that no residual gas is left in the pipeline, and the air pressure in the rubber pipe should be prevented, resulting in loose interfaces. 4. Common faults and solutions 1. The lighter cannot ignite: it is generally caused by oil smoke polluting the electrode, and the stain can be wiped off with a soft cloth, or the electrode distance can be brought closer.

If it still can't ignite, you need to replace the voltage ceramic in the lighter. 2. Tempering: Turn off the switch immediately, wait for a while and then re-ignite, if there is still tempering, check whether the center of the fan-shaped hole on the burner is aligned with the nozzle.

3. Yellowing and weakness of the fire: mainly caused by the deviation of the burner, it should be adjusted so that the fan-shaped center is opposite to the nozzle. If the fire is still very weak, it may be that the gas pressure is insufficient and the liquefied gas tank needs to be replaced.

4. The bottom of the stove is blackened: mainly because the oil or dust falls into the small hole of the stove burner. At this time, the burner should be removed, and the burner should be brushed around the small hole of the burner with an old toothbrush, and then poked one by one with the wire, and gently buckled it on the table to remove the dirt.

5. Clean the oil stain on the surface of the stove every day, and regularly brush and dredge the debris on the gas stove with an iron brush. Hope mine can help you! <>

Liquefied gas stove to natural gas stove method:

1. If you want to change the liquefied gas stove to a natural gas stove, you must transform it according to the correct operation method. Before the change, it is generally necessary to prepare relevant modification tools, such as: screwdrivers, wrenches, natural gas nozzles, etc.

Secondly, you should use a screwdriver to remove all the screws on the liquefied gas hob panel, and the panel should be removed as well.

2. Then you should use a wrench to remove the nozzle of the liquefied gas stove, the nozzle is the stove, and each liquefied gas stove will be equipped with 2 nozzles. The burner does not hinder the removal of the nozzles, as the liquefied gas hob is usually equipped with a spring under the damper plate to provide room for removal. If there is not enough space to disassemble it, you can remove the burner first.

3. Next, the nozzle of the liquefied gas stove should be expanded to the appropriate size, this step is very critical, because the biggest difference between the liquefied gas stove and the natural gas stove is the difference in the nozzle size, in which the nozzle size of the liquefied gas stove is generally 8 mm, and the nozzle size of the natural gas stove is generally millimeters, and the nozzle size of the two is generally about 4 mm.

4. If you want to change the liquefied gas stove to a natural gas stove, you must expand the nozzle of the liquefied gas stove, and it is best to replace it with the stove head, or go directly to the hardware store to buy the nozzle of the natural gas stove to replace. If you want to enlarge the nozzle yourself, you can use an electric drill and a drill bit of the corresponding size to increase the nozzle aperture a little.

5. Under normal circumstances, the nozzle aperture required for a fire is millimeters, while the nozzle aperture required by the guy is millimeters. When drilling, you must be cautious and do not drill too big or crooked, otherwise it is easy to cause the phenomenon of yellow flame and excessive flue gas in the natural gas stove.

6. After the nozzle is changed, it should be installed in the original installation position, and it should be tightened, and the leak test should be carried out at the same time. Finally, install the panel of the liquefied gas stove back and fix it with screws.

7. After the liquefied gas stove is changed to a natural gas stove, although it can still be used, there will be potential safety hazards, such as: the position of the hose may rupture due to too much gas pressure, resulting in natural gas leakage, and when the natural gas combustion is not sufficient, carbon monoxide will generally be produced, which will lead to human poisoning.

Precautions for the use of natural gas stoves

1. In the periphery of the stove, it is not allowed to put flammable items such as waste paper, garbage, dry materials, etc., otherwise it is very likely that the transportation will catch fire, which will affect the later use.

2. In the process of using the gas stove, if it emits a peculiar smell, it is not possible to continue to use, and all the valves need to be closed enough, and then dealt with in time to ensure that there will be no detail problems.

3. In order to ensure the normal use of the gas stove, the stove without a frame needs to be placed on a material with good fire resistance, and the height of the stove needs to be designed to be 60 to 70cm. At the same time, the stove needs to be in a sheltered area, and the flame can be extinguished, resulting in safety accidents.

The liquefied gas stove should be changed to a natural gas stove, because the pressure of liquefied gas is greater than that of natural gas, so the nozzle aperture is smaller than that of burning natural gas, so the original gas nozzle aperture of the liquefied gas stove can be increased a little bit. In fact, it is best to replace all the ignition and adjusting switch assembly, which guarantees the safe use of gas, because the assembly is equipped with debugging from the factory, and the heat is high when burning, the gas is saved, the exhaust gas is less, and the safety is high.

In general, it is not recommended to change the liquefied gas stove to a natural gas stove by yourself, and it can be used after changing the nozzle, but there are potential safety hazards, such as the hose may be ruptured due to high pressure and cause gas leakage, and the gas combustion is insufficient to produce carbon monoxide.

The liquefied gas gas stove can be changed to natural gas, and it can be done with a small accessory.

If it is a simple liquefied gas stove, if you want to use natural gas, then it is necessary to transform the stove so that its outlet and nozzle can meet the requirements of the gas source, and the following steps are required to change the stove.

1. First of all, we need to go to the hardware store to buy nozzles and corresponding tools specially used for natural gas use.

2. Then we need to take the nozzle on the liquefied gas stove and use special tools to manually expand the hole, so that the aperture of the liquefied gas stove can be changed to meters.

3. Install the purchased nozzle to the position of the original nozzle.

4. Empty the gas in the original pipe, and then connect the pipe to check whether the connection is tight to prevent air leakage.

5. Use the modified natural gas stove to see if there is any abnormality.

One; The working principle and shape of natural gas stove and gas stove are similar, the difference is that the orifice of the nozzle is different, the main reason is that the combustion calorific value of natural gas and gas is different, and the pressure is different. The pressure of natural gas is 2800 Pa and the pressure of pipeline gas is 2000 Pa. Piped gas stoves can be converted into natural gas stoves.

This process requires changing the nozzle and fire lid of the stove.

Tips for liquefied gas cooktopsChanging natural gas cooktops.

It turns out that the liquefied gas stove can be changed to natural gas, and the method is very simple, you can get it for a few dollars, and you can save money.

Natural gas stoves need to replace the interface and pressure valve to change to liquefied gas stoves, so for safety reasons, it is best to replace them directly.

First of all, you need to confirm whether your natural gas stove can be adapted to liquefied gas. The combustion properties and pressure requirements of liquefied gas and natural gas are different, so whether a natural gas stove can be converted to a liquefied gas stove requires the advice of a professional or manufacturer.

Liquefied gas and natural gas have different combustion effects, so the nozzle of the natural gas stove needs to be replaced to adapt to liquefied gas. This step entails purchasing a liquefied gas nozzle for your cooktop make and model and replacing it according to the instructions.

The pressure requirements for liquefied gas and natural gas are different, so the pressure regulator of the natural gas stove needs to be replaced to accommodate the liquefied gas. A pressure regulator is a device that is connected between the trachea and the cooktop to control the pressure of the gas. Purchase a pressure regulator for liquefied gas and replace it according to the instructions.

Precautions for using the cooktop

1. Safe use: Before using the stove, make sure the gas or power switch is turned off. When using the gas stove, to check whether the gas pipeline is leaking, you can use soapy water foam to apply it to the connection, observe whether there are bubbles coming out, if there is air leakage, stop using it immediately and notify the relevant departments.

2. Good ventilation: When using the stove, keep the kitchen well ventilated, open the window or use the range hood, so as to eliminate the harmful gases and odors generated by combustion in time.

3. Avoid long-term empty opening of silver fibers: During the cooking process, try to avoid leaving the stove for a long time to prevent food from burning or fire. At the same time, pay attention to adjust the size of the fire in time to avoid excessive fire causing oil splashing or gas leakage.

4. Prevent burns: When using the stove, pay attention to prevent burns. When using a gas stove, use a long-handled cooker to avoid contact with the fire source. When using an induction cooktop or electric stove, wait for it to cool down before cleaning and touching it.