What do you need to pay attention to when connecting liquefied gas cylinders to water heaters and li

1.First, connect a tee at the output end of the pressure reducing valve to connect the water heater and the liquefied gas stove respectively

2.Do not open the pressure reducing valve too much;

3.The rubber tubing at all joints should be tightened with a tightening chuck;

4.Rubber pipes are made of authentic, gas-specific orange-red rubber tubes

5.Wipe it on the joint with a wash and check whether there is air leakage, if it is bubbling, it means that there is an air leak and it needs to be further tightened.

6.Close the gas tank in time after use.

FYI.

There is now a dual-purpose valve on the market that can be used in two places at the same time to use liquefied gas. When connecting the liquefied gas cylinder to the water heater or stove, it is important to pay attention to the reliable quality of the connected rubber pipe, especially the joint of the stove (or water heater) can not fall off, otherwise it is easy to cause the rubber tube to accidentally fall off and ignite the accident.

Since two are used at the same time, it is possible that the pressure in the bottle is not enough, which will make it difficult to complete the bath or the temperature of the bath will not be enough.

The water heater is installed in the cupboard, and while cooking, someone is taking a shower, and the person who cooks can develop gas poisoning. Therefore, in this case, it is better not to install the water heater in the cupboard.

With knowledge of the use of liquefied gas:

<> gas water heater.

Liquefied gas tanks can be used.

The pressure of natural gas is 2800 Pa, and the pressure of coal gas is 2000 Pa. A gas water heater can use a liquefied gas tank, but guess that the pressure of the gas is small, so the firepower will be small, and the cost of filling the gas is about 3 times that of piped natural gas.

But gas canisters.

If the water heater is not modified, it cannot use natural gas by itself, which will be dangerous.

This answer is applicable to the EC6001-GC and Wanjiale JSQ28-14A6 brand water heater models.

1. It is strongly recommended to be installed by qualified and experienced manufacturers after sale.

2. There should be instructions and installation methods in the box, which can be referred to for implementation.

Considering that if the installation is not reasonable, it will cause some bad consequences, it is better not to do it yourself.

One is to choose the location where the water heater is installed, not in the bathroom, not in a poorly ventilated place.

The second is to avoid liquefied gas tanks or gas pipelines that are too far away or too close.

The third is that the water heater should be installed at eye level, and the flames inside can be seen through the glass on the surface of the water heater.

Fourth, it is necessary to regularly check the aging and damage of gas pipes.

Installation method: 1. Lift the water heater to a position that is at eye level, drill holes on the wall to expand the bolts, and hang the water heater.

2. Connect the cold water pipe into the inlet under the water heater.

3. Connect the outlet pipe [the one leading to the shower room] to the outlet under the water heater.

4. Connect the pipe coming out of the gas tank to the gas port under the water heater.

5. Install the battery or plug in the power supply and turn on the gas tank.

6. Turn on the faucet [hot water] in the shower room.

The hot water came out, and it was OK.

Well, if you're well, it's a sunny day, and if you're not good, then ...

Summary. Gas water heaters can use liquefied gas tanks, but because the pressure of the gas is small, the fire power will be small, and the cost of filling gas is about 3 times that of piped natural gas. However, if the water heater of the gas tank is not modified, it will not be able to use natural gas on its own, which will be dangerous.

Also, if the water heater nameplate states that LPG can be used as fuel, that's fine. Otherwise, gas water heaters that are not marked as LPG cannot be supplied with liquefied gas tanks. It must be used according to the type of fuel indicated, just as a gasoline car cannot burn diesel.

The gas water heater can use a liquefied gas tank, but because the pressure of the gas is small, the fire power will be small, and the cost of filling the gas is about 3 times that of the natural gas in the pipeline. However, if the water heater of the gas tank is not modified, it cannot use natural gas by itself, and it will be dangerous. Also, if the water heater nameplate states that LPG can be used as fuel, that's fine.

Otherwise, gas water heaters that are not marked as LPG cannot be supplied with liquefied gas tanks. Blingna is required to use the type of fuel indicated, just as a petrol car cannot burn diesel.

Can you elaborate on that a little bit more?

Precautions for the use of gas water heater 1. When using a gas water heater, be sure to open the doors, windows or exhaust fans. Gas water heaters require a certain amount of air when burning, and if sufficient air is not ensured, there is a risk of hypoxia or carbon monoxide poisoning. 2. In the process of use, it should be done correctly according to the instruction manual, after checking whether the water heater burns normally in use, and the cavity must be adjusted to the flameout state after use, and the gas valve must be closed.

3. If there is a smell or a fire in the gas during use, it means that the water heater and the jujube gas pipeline must be stopped immediately, the gas valve should be closed, and the doors and windows should be opened to prevent danger. Open flames and switches, unplugging and plugging electrical appliances are prohibited indoors, and timely inspection and repair. 4. It is best not to use the gas water heater continuously for a long time, if there are many people, there should be a certain gap.

5. The gas water heater should be checked regularly, and the gas path and joints of the fertilizer spring water foam should be smeared to check whether the gas pipeline and external hose have cracks, aging, loosening and other phenomena. If there is, it should be repaired in time, the loose joints should be tightened, and the broken pipes should be replaced, and there should be no luck. 6. Pay attention to good ventilation, and do not hang items on the air supply and exhaust ports of the appliance, so as not to affect the smooth atmosphere.

Before each use, you should pay attention to whether the room window or exhaust fan of the water heater is open and whether the ventilation is good. It is forbidden to arrange flammable and volatile materials around the water heater, and it is forbidden to arrange towels, rags and other flammable materials on the exhaust and gas supply outlets.

No. The composition of these two gas sources is different, the pressure is different, the calorific value and the combustion residue are different.

1) The working pressure of natural gas is, and the calorific value of liquefied gas is the working pressure.

2) The nozzle aperture of natural gas combustion is large to ensure sufficient natural gas flow to produce sufficient calorific value. When the natural gas water heater is connected to the liquefied gas cylinder, the liquefied gas flow rate of the nozzle will be several times the normal flow rate of the liquefied gas water heater, which is very dangerous.

Liquefied gas water heaters can also be called gas water heaters, and it is one of the most common bathroom appliances. Liquefied gas water heaters are loved by many consumers because of their convenience, practicality and high cost performance. Today, we will work with you to understand what are the purchase skills of liquefied gas water heaters, and together with the installation precautions of liquefied gas water heaters.

1. What are the purchase skills of liquefied gas hot water appliances?

1. Check the brand.

Due to the current gas water heater market is mixed, generally speaking, the brand is relatively quality assurance, gas water heater as an efficient and energy-saving square oak hidden family durable electrical products, its use quality, life and safety must be considered, but usually the performance of such products is difficult to distinguish immediately when purchasing. How can consumers avoid buying inferior products in the mixed water heater market? It is necessary to check whether the company and the product are complete with 3 certificates before purchasing.

2. View the function.

With the development of gas water heaters, the technology has been very advanced, and a variety of functional products that can meet the different usage habits and needs of consumers have been continuously introduced. Products from single function to multi-function, from ordinary mechanical winter and summer to spring, summer, autumn and winter four seasons to electronic segmented combustion to intelligent segmented combustion, from single-point water supply to multi-point water supply, from non-constant temperature models to constant temperature type, a variety of specious conceptual products are also endless, consumers in the choice of their own needs to distinguish.

2. Precautions for installation of liquefied gas water heater.

1. Use correctly according to the instructions.

In the process of use, it is necessary to operate according to the introduction of the manual, check whether the water heater burns normally in use, and use it according to the method of boiling water first and then turning on the gas, and turning off the gas and then turning off the water after use.

2. When a peculiar smell is found, stop using it immediately.

If there is a peculiar smell or a fire-breathing phenomenon in use, it means that the water heater and gas pipeline leakage must be stopped immediately, the gas valve must be closed, and the doors and windows must be opened to prevent danger. Open flames and switches are prohibited indoors, unplug electrical appliances, and contact professional maintenance personnel for maintenance in time.

Liquefied air water heater is an electrical appliance that is often used in daily life, which will bring a lot of convenience to people, so it is loved by many consumers. In daily life, you can choose a suitable and safe water heater according to the above methods. At the same time, in the process of use, you can use it according to the above precautions, so as to ensure everyone's health and safety.

Summary. The connection between the liquefied gas stove and the liquefied gas tank usually requires the use of a device called a "liquefied gas hose", which is mainly made of a soft rubber or polyurethane material that is able to withstand the pressure of liquefied gas. In addition, a metal fitting called a "tubing fitting" is required to connect the LPG hose to the LPG stove and tank.

When installing these connectors, it is important to ensure that they are well sealed to avoid gas leakage. Remember to follow the manufacturer's instructions for use and safety practices to properly connect and use the liquefied gas stove and tank.

The connection between the liquefied gas stove and the liquefied gas tank usually requires the use of a device called a "liquefied gas hose", which is mainly made of soft rubber or polyurethane material and is able to withstand the pressure of liquefied gas. In addition, a metal fitting called a "tubing fitting" is required to connect the LPG hose to the LPG stove and tank. When installing these connectors, it is important to ensure that they are well sealed to avoid gas leakage.

Remember to follow the manufacturer's instructions for use and safety operating specifications to properly connect and make the liquefied gas stove and tank easy to use.

I'm still a little confused, can you be more detailed?

The connection between the liquefied gas stove and the tank usually requires the use of liquefied gas hoses and tubing fittings. The liquefied gas hose is made of a soft rubber or polyurethane material that can withstand the pressure of liquefied gas. The tubing fitting is a metal fitting that connects the liquefied gas hose to the liquefied gas stove and the tank.

When installing the connectors, it is important to ensure that they are well sealed to prevent gas leakage. Please follow the manufacturer's instructions and safety operating instructions for the proper connection and use of the liquefied gas stove and tank.