What are the techniques for beekeeping to observe outside the hive? Can you tell us about that?

Hello everyone, welcome to my article, today we will study, what are the techniques of beekeeping observation outside the beehive? In the process of beekeeping, we should try not to alarm the bee colony as much as possible, and do less unpacking inspection. So that the queen bee can lay eggs with peace of mind, and if she doesn't know how to observe outside, she will definitely not be able to raise bees.

Below I will introduce the technology of observing bees outside the beehive at 11 o'clock, so that you can know the status of the bee colony inside the bee hive without opening the bee hive, so as to carry out targeted treatment.

The first point to note: the worker bee has a lot of pollen, which means that the queen bee is giving birth normally.

The second point to note is that there is water flowing out of the beehive, which means that the nectar source is good. The third point to note is that it is very light to lift the bee box, which means that the bee colony has been short of honey.

The fourth point should be noted that if the bees in the kitchen are large or small, it means that the nest is too old and should be replaced in time.

The fifth point to note is that if there are fewer and fewer bees outside the door, it means that the bee colony has become weaker.

The sixth point should be noted that if there is a bee beard hanging at the door of the bee colony, it means that the bee colony may have split bees, and the bees should be divided.

The seventh point to note is that if you find that a large number of bees are pouring out of the nest at noon every day, it means that the bee colony is thriving and many new bees have hatched.

The eighth point to note is that if you find worker bees flying around at the door of the beehive's hive, crawling around as if looking for something, it means that the bee colony may have lost its queen bee.

The ninth point to note is that if you find that the color of the worker bee is black and shiny, it means that the bee has been dead for a long time and may have been working.

The tenth point to note is that if you find that the worker bees are surrounding the bee hive, it means that your bee colony may be short of honey.

Eleventh, if you can smell a fishy smell or a sour rot smell at the door of the nest, it means that the colony has rotten disease. Well, today's content is updated here, welcome everyone to read more of my articles, welcome to leave a message to discuss, I will know everything!

1. You can judge whether the bees are dying of hunger, disease, fighting or freezing by observing the bee corpse, so as to adjust the living conditions of the bee colony. 2. You can judge whether the hive is wet, whether the bee makes honey, and whether the queen bee is lost by observing the bee flapping action. 3. The reproduction, collection, bee splitting, and bee theft can be judged by the flight behavior.

The large amount of bees working in and out of the hive door indicates that the external honey source is good, the weather is good, the internal work of the bee colony is positive, and the whole bee colony is in a positive situation. The number of working bees entering and leaving the hive gate is small, and there are several possibilities: first, it may be that the colony itself is relatively weak and there are few collecting bees; Secondly, it may be that the external nectar source is insufficient or too scattered, diluting the amount of bees entering and leaving the nest gate.

It can be selected according to the size of the beehive, or according to the density of the beehive, according to the degree of sealing of the beehive, according to the shading property of the beehive, and can also be selected according to the volume of the beehive.

There are three types of beehives: cylindrical beehives, lattice boxes, and bid-winning boxes, which take into account the characteristics of the queen bee, the ability to control the bee colony, and the maximum population potential factors of the local bee colony.

Pay attention to the size of the beehive, ensure the growth of the bees, pay attention to the role of the beehive, understand its functions, and choose the right beehive.

Pay attention to the size of the beehive, the growth environment of the bees, pay attention to the influence of the beehive, understand the efficacy, and decide the appropriate beehive.

Half a month or a month. Too frequent inspections are not conducive to heat preservation and may reduce the amount of honey produced, which is just the right time.

When breeding bees, it is most appropriate to choose 10 to 15 days to open them, and do not open them often, so that the temperature is not enough to extinguish, and the bees will be frightened.

It needs to be opened once a week, this is very appropriate, it should be determined according to the actual situation, this needs to be determined according to the environment and the situation of the bees.

When cultivating honey, it is most appropriate to open a beehive once every three months, three months is enough time to have a lot of honey, and the quality of honey is relatively good.

Just take a look at the beekeeping base.

Beehives should be made of beehive wood, which is strong and durable, lightweight, and not easy to deform and crack. In the north, white pine, red pine, paulownia, basswood, etc. are better; Fir wood is available in the south. Before making, the wood should be fully air-dried or tumbled.

The four walls of the box body should be made of whole wooden boards. If you use smaller wooden boards for splicing, it is best to use convex and concave surfaces or staggered splicing at the splicing place to glue firmly. When the former is adopted, the plate with a convex surface is placed below, and the plate with a concave surface is placed on the top; When the latter is adopted.

The top plate should be made into a surface. In order to avoid raining for a long time, rainwater will leak into the box body and affect the service life.

The outer walls of the beehive should be planed as flat as possible.

When making beehives, all parts and sizes must meet the standards set by the current state or relevant departments. Strive for accurate and consistent specifications and dimensions.

The junction (joint) of the side wall and the front and rear walls of the beehive must be made tightly and firmly bonded to avoid loosening and deformation during use. When the side wall and the front and rear walls are connected, the joints on the adjacent two walls should be staggered up and down, and the two seams should not be connected at the same level, so as to ensure the firmness of the box.

The surface of the beehive can be painted with white paint or tung oil to make the beehive durable, insulated and moisture-resistant.

The standard beehive, also known as the ten-frame beehive and Lang's beehive, is currently the most commonly used superimposed live frame beehive by beekeepers. The standard beehive is composed of 10 nest frames, box body, box bottom, nest door file, sub-cover, box cover and partition. When needed, the relay box can be superimposed on the body of the box, and the relay box does not have a box bottom, which can be used with the box body of the nest box.

When the bee** reaches the 8 l0 box, it needs to be superimposed upwards to expand the hive.

The day of the bees

Sex is honey harvesting.

Du well, on the grid in the box, the bee zhi honey can dao attract bees in, but it is not a reply that the bees are willing to build in the box.

Answer: It's hard to say about the nest, unless the queen bee is also attracted to the box.

These are all seen from TV.,I haven't practiced it.,Make a reference to lz.,The most important thing to pay attention to is that you must protect yourself when you approach the beehive.,Face、Hands and feet are best not exposed places.,Otherwise, it's not comfortable to be stung by bees.。

About 3 meters. Many beekeepers will trap wild bees for breeding, a common way is to burn beeswax to attract bees, the beeswax is burned or melted at high temperature, smeared on the inner wall of the beehive, if the beeswax is too little, you can also drop the beeswax at the door of the hive after melting at high temperature, and then put the beehive on the ground where wild bees are often activeBee.