How to drive various motorcycles,

Open? You short the two starting wires under the ignition lock, and you can "drive" all kinds of motorcycles! ^_

With my current knowledge, I only know that motorcycles are divided into riding motorcycles and pedal motorcycles. Or according to the way of operating the clutch, it can be divided into manual and automatic.

The accelerator handle of the motorcycle is always set on the right hand, and the ignition button should also be on the right. There is a symbol for "thunder and lightning". The handle near the throttle handle is the front brake lever.

The left handlebar of the motorcycle is fixed, and according to the different clutch methods, the function of the handle is the clutch handle when there is a manual clutch. In the case of automatic clutching, it is the rear brake handle.

The rear brake of the manual clutch is on the right footrest, and the rear brake of the individual automatic clutch is also here, which is generally a pedal lever, and if the brake is set here, the rear brake handle is not set at the left handlebar.

General certificate or manual. The braking method will be indicated.

After knowing this, you can start the car, twist the key to 0n, and press the point switch. If there is no response, you hold (press) the brake or hit the main support. It should be fine. Remember to see if there is oil or electricity.

I read an instruction manual or a driving manual with the car in detail. After that, you can find a place where no one is around and start testing your bike.

In fact, the skills of driving a motorcycle are basically the same

3 years ago, motorcycles were basically 90-125 models, gears are generally positive, in recent years more popular 250-400 models, gear 1 is positive and then are reversed, learning motorcycles are also easier as long as you can ride a bicycle will soon learn to use 1 gear or 2 gear to learn the safest, and there is a fast way to learn

First of all, you need to get a driver's license, and you can learn how to drive at a driving school.

With hands and feet will do.

I think the first thing to do is to be affordable.

Steps to operate a men's car:

1.Insert the key to open the electric door.

2.Cut the gear of the car to neutral (red light on), press the ignition button to start the engine, gently turn the throttle handle with the right hand and add a little throttle to warm up the car for about a minute, then grab the clutch handle with the left hand, and hang the gear with the left foot on the gear pedal (there is an indicator next to the kilometer gauge to show the gear), after hanging the gear, slowly increase the gas pedal, while slowly loosening the clutch handle, the car will start to walk, and when the car walks up, you can change gears as needed (the action of shifting gears is the same as the action when hanging a gear).

In general, most people, both novice and veteran, are accustomed to starting in second gear.

3.Parking: Hold the clutch handle with your left hand, pull the accelerator back to the minimum with your right hand, and press the brake pedal with your right foot to stop the car.

Women's car operation steps:

1.Insert the key to open the electric door.

2.Grab the rear brake handlebar with your left hand, add a little throttle to your right hand and press the ignition button to start the motorcycle.

3.Release the brake with your left hand, slowly increase the throttle with your right hand, and the car will start.

4.Parking: Pull the accelerator back to the minimum with your right hand, hold the rear brake handle with your left hand, and the car will stop.

Testimonials from Freddy Gao:

Although I didn't say the function of each part, but the operation is more comprehensive Xie Luo2011-02-06Satisfactory answer2011-02-06First start the car in neutral, warm the car, and so on after the idle speed is stable, hold the clutch handle, hang up the first gear, add a little oil (a little larger than the idle speed just now), slowly loosen the clutch handle, until you feel that the car has a little running forward, at this time the engine speed will drop, you can add a little more oil, in order to stabilize the speed on the line, Second-hand cooperation, the left hand slowly releases the clutch, the right hand stabilizes the throttle to prevent the engine from turning off, and the car can start smoothly.

The car moves together, you can change to the second gear, the way is to release the throttle with the right hand, and at the same time put the clutch handle with the left hand, quickly join the second gear, and pay attention to the clutch with the left hand when you can not let go at one time, you can quickly put half, and when the power is transmitted, then put it all. At the same time, the right hand should also be refueled at the right time, so as not to let the car stall when the gear is increased.

The operation is similar to adding other gears.

There is also a saddle lock integrated into the front lock, insert the key into the front lock and twist it to the left to open the seat cushion, or insert the key into the front lock and twist it a little to the left, mark against an arrow, and then press the key down to open the seat cushion. The Yamaha pedal cushion lock and key door are connected, and once the key is inserted, it is simply turned in a counterclockwise direction. If you still can't open it, it may be that the cushion lock is stuck, and there is no way, please ask a master who specializes in unlocking.

Summary. Dear, I'm glad to answer for you<> here's how to drive a motorcycle: First, the ignition should be turned on.

EFI vehicles should be allowed to complete self-tests. Then, it's best to start the vehicle in neutral. But for safety reasons, it's best to pinch the clutch handle before starting.

How to drive a motorcycle.

Dear, I'm glad to answer for you<> here's how to drive a motorcycle: First, the ignition should be turned on. EFI vehicles should be allowed to complete self-tests.

After the vehicle is started, it should be warmed up. <>

<> hello dear, extended content: After the successful start, it is the shift of the motorcycle, and the motorcycle is relatively easy to shift. Release the throttle first, then pull the clutch, quickly shift to second gear, put the clutch throttle, and repeat the above actions according to the vehicle speed, you can smoothly realize the shift of the vehicle.

20km is in 2nd gear, 35km is in 3rd gear, 50km is in 4th gear, 65km is in 5th gear, and 75km is in 6th gear. <>

The motorcycle needs to be twisted to the right to make the key go from off to on. At this time, the motorcycle lock is opened.

The right side of the handlebar can be twisted is the throttle, the front brake can be pulled, and the left side of the handlebar can be pulled is the clutch, and the clutch will be separated when the clutch is tightened, and the power will not be transmitted; The left foot steps on a gear lever that can be shaken back and forth, and the forward step can increase the gear, and the backward can reduce the gear; Stepping on the tip of the right foot is the rear brake. After starting, don't rush to the gas pedal, tighten the left clutch horn, land on the ground with your right foot, lift your left foot and gently step forward on the front end of the gear lever; And the left foot on the ground, the right foot on the rear brake as a guard, lightly twist the right side of the accelerator, while slowly releasing the left clutch horn, the car moved, and then pull the clutch to increase the speed of refueling.

Precautions for riding motorcycles:Be sure to wear a helmet when riding a motorcycle. The reason why the helmet exists is because it can protect our heads, if you don't wear a helmet in case of any accidents, it will be regretful, so you must remember to bring a motorcycle helmet when you travel, there is always no harm in wearing it.

Don't use the clutch as a brake, the clutch and brake of a motorcycle are not the same, don't use the clutch as a brake, so I still hope that everyone drives cautiously and safely.

The motorcycle is driven like this:

1. The ignition switch should be turned on, and the EFI model should let it complete the self-test, and then confirm the state of the vehicle gear It is best to start the vehicle in neutral mode, but for safety reasons, it is best to pinch the clutch handle before starting, it is best not to start the accelerator, and the vehicle should be warmed up after the start is completed.

2. After the vehicle is warmed up, you can start The start of the motorcycle is relatively easy, as long as you find the access point of the clutch and control the throttle handlebar, it will be easy to achieve. Its operation is actually relatively simple, first of all, you should pinch the clutch handle, and then hang into a gear, by the way, observe the road conditions, slowly loosen the clutch when you feel the vehicle tremble, you can stabilize the clutch, slowly give oil and then release the clutch, the vehicle can start smoothly.

3. After the successful start is the shift of the motorcycle, the motorcycle shift is relatively easy, first release the throttle, then pull the clutch, quickly shift into the second gear, put the clutch accelerator, repeat the above actions according to the speed, you can smoothly realize the shift of the vehicle. Under normal circumstances, 20km h is shifted into second gear, 35km h is shifted into third gear, 50km h is shifted into fourth gear, 65km is shifted into fifth gear, and 75km h is in sixth gear, and the engine speed can refer to the vehicle speed, because these two speeds are equal under normal conditions.

Through the above operations, the motorcycle has run normally, so what should I do if I want to reduce the speed at this time? In fact, it is very simple: the first step is to turn off the accelerator and let the engine idle, and then use the front brake moderately, and cooperate with the rear brake to slow down the vehicle.