How to make up the motorcycle vacuum belt, can the motorcycle vacuum tire be repaired internally

Tools to be prepared for vacuum belt tire repair: vacuum tire special air pump, marker, tire removal machine, tire grinding machine, vacuum tire heat subsidy.

Motorcycle vacuum belt tire repair method:

1. Prepare a special air pump for vacuum tires to fill the tires.

2. When the vacuum belt is filled with gas, carefully find out the leakage or damage of the vacuum tire, and mark the damaged place with a marker.

3. After finding out the damage or air leakage, use the tire removal machine to remove the tire from the hub.

4. Use a special tire grinding machine for vacuum tires to smooth out the damaged parts of the tires.

5. Attach the vacuum tire heat subsidy to the leakage or damage of the vacuum tube.

6. After the heat subsidy is pasted, use the tire repair machine to press the damaged or leaky place for a period of time, and the tire will be repaired in ten minutes.

7. After the tires are repaired, finally check the air tightness of the rim and the tire, and make the hub and tire clear by the way.

Raw material; Film, cold patch, cylinder, self-replenishing fluid.

1. Cold repair method: disassemble the vacuum belt, smooth the air leakage, and treat it with cold repair glue and film.

2. When the glue is about to dry, press the film hard and paste it, reload and pump it up.

3. Self-rehydration method: If there is still air leakage, the easiest remedy is to use "vacuum tires."

Self-rehydration". <

4. Connect the cannula with self-replenishing fluid, inject it from the pump, and automatically replenish the air leakage.

The repair methods of motorcycle vacuum tires are: the first one, use fire or cold repair. Peel off the vacuum tire, polish the air leakage from the inside, and then glue it firmly with the rubber of fire or cold skin.

The second type: repair with tubeless self-replenishment. Add the self-replenishing fluid to the tubeless along the valve, turn the tire a few times, and then fill it with the appropriate air pressure to repair it by itself.

The third is repaired with a special rubber strip for vacuum tubes. Use a special tool to plug the rubber strip into the air leak hole of the vacuum tube.

Electric vehicle and motorcycle vacuum tire, mushroom nail tire repair method and precautions. The vacuum tire of the electric bucket car can also use the method of internal repair of the vacuum tire of the small car and the rubber strip, which is effective compared with the problem that the rubber strip is not used for a long time, and effectively improves the service life. It is the best and most effective way to repair the vacuum tire at present.

The questioner adopts.

There is no best and most durable way to repair vacuum tires is to go to the car tire repair shop and use fire to repair them. It is to remove the tire, stick a small piece of special rubber to the hole on the inside of the tire, and iron it firmly. The downside: it's more cumbersome.

To put it simply, plug the hole with a rubber strip, but it is not durable. Fill in and make up, and the hole gets bigger and bigger.

There are also people who pour glue [automatic sealant] into the tire, but it can only be used on very small holes that cannot be checked, and the big holes have no effect. There is *** is: when the tire is changed in the future, the rim will have a layer of rust and oxidation, which will not be clean.

You can use automatic sealant or go to the place where the car is repaired and ask the master to make it up for you.