How to identify the authenticity of salt source agate? Is the salt source agate fake?

First, look at the salt source first.

The color of agate.

The natural salt source agate is very bright in color and very distinct in color. If you look closely at the surface of the agate, you can see small red spots on the red bands. But the color of those fake salt source agate on the market looks very dull, and these are all made by dyeing by merchants, so there is almost no color on its inside.

So you can carefully observe whether there are small spots on the red generation of salt source agate to see if the color on his surface is very active.

Second, look at the hardness of salt source agate.

Although the natural salt source agate is a classification of soft stone, the hardness is still relatively large, so when identifying, you can use a knife to slide on it. It will not leave any traces on the surface of the real salt source agate, nor will it cause any damage to the salt source agate. However, most of the fake agate on the market are made of glass or stone, and sliding on them with a knife will leave deep marks.

This identification method can clearly judge its authenticity, and confident merchants will not mind this.

3. Look at the transparency of salt source agate.

The transparency of the real salt source agate is not high, and you can feel some turbidity when you observe his interior, and you can see the waterline inside some salt source agate. But most of the fake salt source agate on the surface is made of glass, so the transparency is very good, like a glass ball. The appearance of this salt source agate may be slightly higher, but he does not have any collection value and purchase value, so when buying salt source agate, you should distinguish its transparency, don't just look at his appearance.

The weight of real salt source agate is also heavier than that of artificial synthesis, so it is best to buy a heavier salt source agate with the same volume when buying.

1.Look at the degree of moisture: the origin of Yanyuan agate is located in the middle of the two major production areas of Nanhong, Meigu and Baoshan.

The climate is cool and pleasant all year round, and it's in such a beautiful land. The quality of the colored agate produced will naturally not be bad. The real salt source agate is smooth to the touch, and the fake salt source agate is rough to the touch.

2.Look at the cracks of salt source agate: the output of salt source agate is limited, there are many cracks in the original stone, and the yield is very low. Therefore, the real salt source agate will generally have several cracks, while the fake salt source agate can achieve no cracks in the finished product.

Extend your data. Maintenance Method:

1.First of all, be careful not to collide with or fall off with hard objects. When not in use, should be stored in a soft jewelry box. Try to avoid contact with perfumes, chemical liquids, soaps or human sweat to avoid erosion and affect the vividness of agate.

2.Secondly, be careful to avoid heat sources, such as sunlight, stoves, etc. , because agate will expand when heated, and the increase in molecular gaps will affect the quality of jade. Constant exposure to high temperatures can also cause the agate to burst.

The authenticity of salt source agate can be seen from the color and moistness.

Yanyuan agate is mainly purple, green, pink, generally in other jade or agate rarely have such a color, dyed agate is usually more bright or the color is too sudden, so it is easier to distinguish; From the point of view of moistness, salt source agate is more delicate and has lower light transmittance, and other agate rarely has such a texture.

How to identify the authenticity of salt source agate? I think I can go to a professional agate shop plot, and the professional teacher said to identify it.

No.

Identification of salt sources. The hardness of the agate can be seen, and after the surface of the real salt source agate is scratched by a knife, the surface will not leave obvious marks. Fake salt source agate will leave a deeper trace on the surface due to the production material.

Identification of salt source agate can look at the color, the color of the real salt source agate is naturally distributed, and it will not fade after wiping with alcohol. The color of the fake salt source agate is too uniform and bright, and it can fade after being wiped with alcohol.

Agate maintenance precautions.

Be careful not to bump into hard objects or drop them, and store them in a soft jewelry box when not in use.

It is necessary to pay attention to the agate worn or placed for a long time, and the surface will produce oil or dust. Dust should be cleaned with a soft bristle brush; The oil should be scrubbed with mild soapy water and then rinsed with water.

It is necessary to pay attention to avoid heat sources, such as sunlight, stoves, etc., because agate will expand when heated, and the increase in molecular volume will affect the endoplasm, and continuous contact with high temperature will also cause agate to burst. Cracks may appear at the lightest, and fractures will occur at worst.

Color. Salt source.

The color of agate has purple, fuchsia, purple pink and pink and other main colors, in addition to yellow, white, green, purple, brown and other colors, it is best to choose a solid color of salt source agate, pure color salt source agate collection value is higher, followed by you can choose the color transition of the salt source agate, that is, either choose the pure color salt source agate, or choose the color transition of natural salt source agate.

Please click Enter a description.

Hardness. The hardness of salt source agate is high, so it is not easy to break and collapse when carving, and the color of salt source agate is varied, so it is deeply loved by carvers, and can be carved out of amazing finished products by the imagination of carvers.

Please click Enter a description.

Warm and delicate. Salt source agate is very warm and delicate to the touch, and it is relatively smooth, on the contrary, if the salt source agate is rough to the touch, it means that the quality of the salt source agate is poor.

Please click Enter a description.

Engraving process. No matter how good the material, if there is no good carver, it can only be a waste, if the carver has his own unique insights, also has his own innovation and better carving technology, then the carved salt source agate finished product will be amazing.

Please click Enter a description.

Size. When buying salt source agate, you should carefully see if each bead of the salt source agate bracelet is the same size, if the beads of salt source agate are not the same size, then the finished product will not look good.

Please click Enter a description.

No cracks. Finally, it is necessary to carefully check whether there are cracks in the salt source agate, because the hardness of the salt source agate is larger, and there will generally be no cracks when carving, if the cracks are large, it will affect the beauty of the salt source agate.

Please click Enter a description.

Toping. After the salt source agate plate is finished for a long time, the salt source agate will appear pulp, but because the raw materials of the salt source agate have more cracks, the salt source agate without cracks is more precious.

Please click Enter a description.

Yanyuan agate, whose name is derived from the name of the place of origin, is a kind of Yanyuan County, Liangshan, Sichuan.

of multicolored agate. Yanyuan County is located in Liangshan, Sichuan, Meigu, the two major producing areas of Nanhong.

and Baoshan, Yunnan. The authenticity of salt source agate can be identified by looking at the moistness, color, and cracks. Moistness is an important indicator of merit, and the higher the moisturizer, the better the texture.

In terms of color, Yanyuan agate is best in purple, pink, and pink-purple, of course, to see the purity of the color of the beads, the color of the whole bead is uniform. Salt source agate is also more fissures and impurities, the less cracks, the less impurities the better, this is beyond doubt. In addition, the output of salt source agate is very small, and there are not many high-quality products, and the salt source agate market is also relatively high.

Look at the moistness. Yanyuan agate origin, Yanyuan County is located on the Qinghai-Tibet Plateau.

The southeast edge, on the west bank of the lower reaches of the Yalong River, belongs to Liangshan Prefecture, Sichuan.

Jurisdiction, located in the southwest of Shushan, west of the love holy land daughter country Lugu Lake.

To the south is Panzhihua, which is to Shangri-La.

Finally, the undeveloped texture of the wood is a must-pass place. Located in the middle of the two major producing areas of Nanhong, Meigu and Baoshan, the climate is cool and pleasant all year round, and the quality of the colored agate produced is naturally not bad. The real salt source agate is smooth to the touch as a whole, while the fake salt source agate is rougher to the touch.

Look at the color. Salt source agate color Salt source agate varieties are diverse, rich in color, yellow, green, red, black, blue, purple, etc., the texture is delicate, with the same moistness as the southern red, and it will be beautiful after a long time. Because the texture is hard, the toughness is good, the carving is not easy to collapse, and the gelatinous texture is strong and naturally oily, so it is very suitable for carving.

The abundance of colors can inspire the engraver's creations.

Look at the cracks. The production of salt source agate is limited, the original stone is cracked, and the yield is very low. The high price of salt source materials is not unrelated to the player's curiosity psychology, and the colorful color of the material is also one of the factors contributing to its **, coupled with the limited production of salt source agate, the rough stone is cracked, the yield is very low, and the ** is strong.

Therefore, the real salt source agate will generally have a few cracks, while the fake salt source agate can do not have a single crack on the finished product. It can be seen that the fine salt source carvings still have a lot of room for appreciation.

Looking at the color, the color of the high-quality salt source agate is warm and moist, and the color transition is natural.

Please click Enter a description.

Among them, the solid colors of purple, purple red, purple pink, and pink are the best.

Please click Enter a description.

Looking at the warped color, the beauty of the warped color of Yanyuan Agate lies in its soft transition, and clear color separation, each layer is full of a magical charm.

Please click Enter a description.

Looking at the meat quality, the meat quality of Yanyuan agate should have a smooth and smooth texture, and the color is full with oily brightness.

Please click Enter a description.

Looking at the carver, Yanyuan agate is the same as southern red agate, with hard texture, good toughness, and carving is not easy to collapse.

Please click Enter a description.

Salt source agate can be seen to identify the real and fake, the real salt source agate has a sense of warmth, the feel is smooth, and the fake feel is relatively rough. In addition, you can also look at cracks to identify salt source agate, real salt source agate will generally have cracks, while fake salt source agate will look very perfect, basically no cracks.

1. Look at the moistness.

Salt source agate can be identified by looking at the moistness, the real salt source agate as a whole feels very smooth, there is a sense of warmth, and the fake salt source agate will feel rougher.

2. Look at the cracks.

In addition, to identify the authenticity of salt source agate, you can also see cracks, the output of salt source agate is relatively small, most of the rough stones have cracks, and the yield is low, so most of the salt source agate has cracks. Whereas, fake salt source agate often has no cracks and looks perfect.

3. Look at the color.

The color of salt source agate is very rich, there are yellow, green, red, black, blue, purple and other colors, no matter which color of salt source agate color is relatively bright and bright, and the color of false salt source agate will be relatively dull.

Summary. Kissing is mainly divided into the following 3 points of identification:

1. Texture, the texture of the real salt source agate is smooth and delicate, and the fake feel is rough;

2. Cracks, cracks often appear on the surface of the true salt source agate, while the fake ones are relatively clean;

How to distinguish the authenticity of salt source agate.

Kissing, it is mainly divided into the following three points of identification: 1. Texture, the texture of the real salt source agate is smooth and delicate, and the fake feel is rough; 2. Cracks, cracks often appear on the surface of the true salt source agate, while the fake ones are relatively clean;

3. The specific gravity, the proportion of the genuine product, and the fake feeling is light and fluttering.

Kiss, because jade agate and the like can't be seen, kiss, you have to get your hands on it.

Kiss yourself first.

Take a look at it and compare it with the kiss above.

Oh oh, well, does it look like it's real.

Dear, is there a certificate or anything like that, and at what price can I buy it?

It's a kiss to start with.

I bought it at 600 and bought it in the live broadcast room, I don't understand it, I just look good, but I feel a little expensive and I'm worried that it will be boring to buy a fake.

It looks like the real thing, but it won't be more than 300 yuan.

Kiss, it's expensive to buy.

Even if it's true, it's expensive.

Oh oh well, thanks.

Summary. Hello, salt source agate is a precious gemstone, with a high market value, so there are often some merchants selling counterfeit and shoddy salt source agate. Here are some ways to identify the authenticity of salt source agate::

Observe the color and texture: The color of the salt source agate is generally light yellow or dark brown, with clear lines and delicate textures, while the color of counterfeit salt source agate may be too bright or uneven in color, the grain is not clear, and the texture is not delicate. Feel it with a hand:

Salt source agate is warm, smooth and delicate to the touch, while counterfeit salt source agate often feels very smooth and cold. Smell: Salt source agate is a natural gemstone that will not have any smell, while counterfeit salt source agate may have some chemical smell.

Illuminated with light: Salt agate will show a yellowish or dark brown luster in sunlight or light, while counterfeit salt agate may have a dull luster or reflect light from other colors.

This is not a salt source bracelet.

Hello, salt source agate is a precious gemstone, with a high market value, so there are often some merchants selling counterfeit and shoddy salt source agate. Here are some ways to identify the authenticity of salt source agate: Observe the color and texture:

The color of salt source agate is generally light yellow or dark brown, with clear lines and delicate texture, while the color of the fake salt source agate may be too bright or uneven in color, the texture is not clear, and the texture is not delicate. Feel it with your hands: Salt source agate feels warm, smooth and delicate to the touch, while counterfeit salt source agate often feels very smooth and cold.

Smell: Salt source agate is a natural gemstone that will not have any smell, while counterfeit salt source agate may have some chemical smell. Illuminated with lights:

Salt Agate will show a pale yellow or dark brown luster in sunlight or light, while counterfeit Salt Agate may have a dull luster than Sullen Agate, or there will be reflections of other colors.

Hello, I can't identify whether it's a salt source bracelet or not, I hope you can understand<>