How to hide wifi, how to hide wifi

To turn off the SSID broadcast of the wireless router, the method is as follows: open the browser, enter the address of the router obtained from the previous one in the address bar, enter the router password, and enter the wireless router settings page. Find the "SSID Broadcast" option in "Wireless Settings", disable the function, save the settings, and after the system prompts to restart the router, your WiFi signal will be hidden.

On the router management page, turn off "Enable Wireless Broadcasting" next to "Wireless Name".

How to set the SSID hiding method of the wireless network:

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the wireless settings interface and check Hide SSID or Turn off Broadcast (SSID).

First of all: log in to the router management interface, open any browser, enter the router management address, and access the router management interface. If you have not changed the router management address, enter it to access the router management interface. If you have changed the router management address, enter the changed management address to access the router management interface.

As shown in the figure below, note: The default administrator account and password are admin.

2. Secondly: After successfully logging in to the router management interface, select "Advanced Settings" in the upper right corner to change the wireless settings of the router.

3. Finally: Select the wireless settings on the left and check the "Turn on wireless broadcasting" on the right, so that the router will broadcast the name of the wireless, and others can see your wireless network. Don't forget to save.

You can enter the router management page - turn off the "Wireless Sleepy Broadcast Wireless SSID Broadcast" function; Or turn on "Hide Wireless Broadcast Hide SSID Broadcast" to hide the router's WiFi.

Note: Different brands of routers have different methods to hide wifi, please refer to the actual display on the page.

The hidden wifi cannot be viewed directly, and you need to manually enter the wifi name and password to connect.

Connect to Hidden WiFi Method:

1. Go to Set Wangsen Fuel Location --WLAN, turn on the "WLAN" option, and click "Add Network";

2. Enter the name and password of the hidden wifi, and select the encryption method of the router in the security column: the general router is set to WPA WPA2 PSK, and the wifi without password is selected as "open";

3. After setting the accurate WiFi name, password and security, click Save to join the hidden WiFi network.

Hide Personal Hotspot:

You can go to Settings -- (Other Networks & Connections) -- Personal Hotspot -- Hotspot Configuration -- Hide My Hotspot -- Turn on Hide WiFi Hotspot, if there is no switch on this page, you don't support hiding WiFi Hotspot.

Huawei MateBook 14s

windows10

Browser 1: In the address bar of the browser, enter the address posted on the router to enter the background.

2. In the router, find the "Wireless Settings" option and click on it to enter.

3. In the new interface, find the "Advanced Settings" option at the top and click on it.

4. In the new interface, find the wifi you want to hide, and turn on the slider on the right side of the hidden signal.

Device: Computer.

Tool: Huawei router.

Specific steps: 1. To connect to the router's wifi, open the mobile phone or computer browser, enter the router's management address in the address bar, the login method has been introduced in my previous article, and will not be introduced in detail here, enter the administrator password (router login password) to enter the interface. Click More feature options.

2. Then select wifi settings, find wifi stealth on the right, click on the small triangle behind, select open, and then save, here the wifi name is hidden, some routers enter the spine to change the router with the wild stupid to find the routing settings > wireless settings, remove the checkmark before turning on wireless broadcasting, click save and the settings are completed, and the signal is hidden.

Hide how to connect later:

After hiding the wireless signal (wifi), others can't find it at all, even your home device can't find it, and you need to manually enter the wireless name and wireless password to connect successfully.

Similarly, click on Settings, turn on Wi-Fi, scroll to the bottom to find Add Network or Other Networks, and click Add Network. Enter the network name, which is the name of the wifi, and then click on the small triangle behind the security, select the wpa wpa2 pskp (wpa wpa2) this defense option, select it before you can enter your wireless (wifi) password, and then click save to it, so that you can connect to wifi. <>

I believe that many friends are using Xiaomi wifi, but they don't know how to hide the network, so let's teach you here.

1. First open the Mi WiFi app and click on the toolbox page in the lower right corner.

2. Then in the page that opens, click on WiFi settings to enter.

3. Then click the right side switch to hide the network from being discovered.

4. At this time, you can see that the button has been turned on, and the hidden wifi is completed.

In the settings interface of the WiFi router or AP, you can disable the broadcast SSID function. If you want to be more secure, it's best to turn on wireless MAC address filtering and MAC address filtering for Internet access, turn off DHCP, etc.