After upgrading the W10 system, sometimes the screen will blur after booting 50

Step 1: Don't panic when such a problem occurs, analyze it slowly, generally from the first point, whether the display has been squeezed, impacted, etc., if not, look down! Step 2:

Take a look at the temperature of the graphics card,If the temperature is too high,It will also blur the screen,A while ago, my notebook was overheated,After the screen was blurred,The independent graphics card was burned! (As far as the current system configuration is concerned, this is likely to lead to,) Step 3: Win7 and Win8 system will hardly appear, XP system almost open more software, at the same time is easy to get stuck blue screen, or a blurred screen.

Step 4: Check whether it is a problem with the memory module, but generally the memory that has been added cannot be started after booting, and some will pull out the memory module, wipe it well in the place of the gold finger, and give it a try! Step 5:

The most likely,It's also the most anticipated problem,That's the driver problem,People who do computers pay attention to a word,That is, all software problems,It's not a problem.,Get a driver software or something.,Drive it.,Or go to the official website ** driver.,The driver is not necessarily the latest is the best.,In addition, there are some differences between the drive mode of A card and N card, and there are dual graphics cards,I'll introduce it later。

It's because of the boot start. It will be fine in a while.

There are three main reasons for the blurred screen: According to your description, it may be too much dust.

1: The reason for the graphics card: If the graphics card is broken, there will be a blurred screen, and dust will also appear, check the graphics card.

2: The reason for the display: check the display, the method is to put *** into the optical drive to see the first half an hour and more time, to see if there is a phenomenon of the screen, if there is a basic can be concluded that the display is broken, if not, it is not a problem with the display.

3: Software conflicts sometimes occur, but this phenomenon of the blue screen of the multi-screen is very rare, even if the graphics card is the problem mentioned above, repair and wipe the graphics card and, replace the new graphics card, try it.

Supplement: Press the small button under the monitor, set up the monitor to see if there is a problem, if there must be a problem with the display, the reason for this graphics card is the largest, 4: Click the right button in the device management of the graphics card, update the software driver to try it.

Try to enter the safe mode, if the display in the safe mode is normal, check whether there is a virus in the boot items, check whether incompatible software has been installed recently, graphics card driver, etc.; If the safe mode is abnormal, try to check whether the graphics card is in good contact.

It depends on what version your system is,It is recommended to use win10 1909 version is more stable,There will be no blurred screen。

Step 2: If the problem is still in the past, try the following steps to solve it:

1. Win10 desktop right-click the mouse and click "Display Settings" in the menu.

2. Under the Settings system display, click "Advanced Settings" on the right side.

3. In the Advanced Display Settings window, click "Display Adapter Properties" at the bottom.

The computer is turned on in the morning, and the wild Jane flower screen solves the method of opening the pants.

Enter safe mode, upgrade the graphics drive or uninstall the graphics drive, and then use the driver wizard to install another one.

This may be due to hardware compatibility.

Is your problem solved? Mine is the same. What to do?