What are some ways to unclog a drain blockage?

Pump dredging method. When the small pipe is blocked, you can plug the hose of the pump into the drain pipe, seal the drain, and then put in enough water to quickly pump air into the sewer, and the pipe can be dredged. Soda and vinegar dredging method.

Use baking soda and high-strength vinegar to pour an appropriate amount of baking soda into the drain first, and then pour an appropriate amount of high-strength vinegar, and the soda powder and vinegar have a violent chemical reaction to remove grease and other sticky things in the pipes. Using the toughness and hardness of natural bamboo or FRP bamboo, artificially make it penetrate into the pipeline, push the siltation blockage or disturb the sedimentary mud to achieve the purpose of dredging. It is dredged by Jinwei cleaning, which is simple and convenient to dredge and is not troublesome.

Log dredging method. Insert a log very close to the drain into the drain and fill the pool with a sufficient amount of water, then quickly pump the log up and down, and the dirt in the pipe may be washed away under the action of pressure and suction. Hydraulic dredging method: a plastic pipe (or high-pressure rubber pipe) with a diameter of 15 mm and a length of about 10 meters

50 kg pressure) pipe dredging near the take a diameter of 15 mm, about 10 meters long plastic pipe (or high-pressure rubber pipe: 50 kg pressure), one end of the sleeve tightly on the faucet, the other end of the nearby with silk wrapped outside the rubber pipe, plug tightly plugged into the sewer of the sewer, open the faucet and screw to the maximum, the pressure and rapid flow of tap water will wash away the blockage.

Solutions for blocked drains:

Step 1: Plug the drain of the sink, first store the hot water in the upper half of the sink, remember that the temperature must be 50.

Step 2: After the water is stored, pull the water plug (drain cover), pay attention to anti-scalding, more than 50 water, the human body feels very hot.

Step 3: Wait for the hot water to run dry, along with the air current.

Principle: An important reason for a clogged drain pipe is that grease solidifies on the drain pipe.

As far as the sink drain is concerned, the daily food oil stain adheres to the drain pipe, which is the main cause of blockage. In the case of bathrooms and sinks, the oil stains from the food become sebum dirt and attach to the drain pipes.

The hot water will melt the grease on the drain pipe, and the high-pressure air flow will instantly wash away the melted grease, which is why it is necessary to store water or have a large flow of water.

1. Use pipeline dredging agent. Clogged sewer pipes are an annoying thing, and if they are not unblocked in time, water will accumulate. The most effective way to unclog a pipe is to use a pipe unclogging agent, if there is no water in the sewer, ** into half a cup of water.

At this time, the pipe is boiling. Rinse with plenty of water after about 20 minutes.

2. Use caustic soda. It is estimated that many people have heard of caustic soda, which is very corrosive. You can use caustic soda to unclog sewer pipes, and the method is simple.

Put the caustic soda into the mouth of the sewer, and then pour a pot of boiling water into it, not a warm kettle, but a large kettle for water. Similarly, baking soda and vinegar can also be used to unclog sewer pipes.

3. Boiling water. There are various causes of clogged sewer pipes, and the corresponding methods should be taken according to the cause of the blockage. If your sewer pipe is blocked by oil, you can use boiling water, of course, if you can buy concentrated sulfuric acid, the effect is better.

In order to ensure the safety of life, everyone needs to use sulfuric acid with caution.

4. Spring steel wire. If the sewer pipe is blocked by hair or debris, then you can go to the market to buy a spring wire of about 2 meters, and then bend 10 to 20 degrees at the top of the centimeter, dredge back and forth at the entrance and exit of the sewer, and rinse with water, so that you can also achieve a good dredging effect.

Here's how to unclog the kitchen drain:

1. The kitchen sewer pipe is used more frequently, it is inevitable that there will be a phenomenon of blockage, this happens, first to judge the reason, if it is because of some sundries blocked, you can find something like iron wire to get the dirty things out, if not, and the house has not lived for a long time, you can find a decoration company, because this is a quality problem. If it is a hidden project, it is free of charge for five years.

2. If you find that the kitchen sewer pipe is blocked, the first thing to do is to close the water pipe to avoid more stagnant water, and never try to flush the impurities down through the water. Let's take a look at what is blocking the kitchen sink, generally the sewer pipes at home are blocked by greasy, so pour a pot of boiling water into the sewer pipe first, and then dredge the effect will be better, if the drainage is still not smooth, use a wire to penetrate down, and deal with general small problems from these two aspects can be solved.

3. When there is no obvious blockage in the drainage pipe of the pool or washing tank, the overflow hole can be blocked with a damp cloth, and then the sludge can be removed with a wrench. If you can't remove a blockage from the sink or sink drain using a wrench, you can place a bucket at the drain bend and unscrew the elbow to remove the blockage.

4. Most of the places where the kitchen sewer pipe is blocked are U-shaped bends, if it is a sewer pipe with sewage screws, it is easy to do, and it is easy to unscrew it directly, but before treatment, a sewage basin should be placed at the bottom to avoid staining the cabinet. After unscrewing, use a steel wire to pass both sides, and it can usually be solved quickly. If it has not been solved, you can remove all the sewer pipes, unscrew all the plastic connections, rinse them, remove the impurities inside, and then assemble them in turn, and then solve the problem.

The kitchen sink drain should be replaced with a basket type, the purpose of which is to play a certain role in filtration. Otherwise, there may be flow accumulation in that section of the horizontal pipe for a long time. Moreover, it is a set of several leaky baskets with different eye diameters, and it will not easily clog the problem.

You can design a slot according to the size of the kitchen, and put it under the trough with a funnel, you can make it bigger, and the funnel is used to screen the debris that is easy to block the sewer, but you need to put the debris in the funnel every day. Make an iron plate that can be pushed and pulled with your feet on the outside, so that the sewer mouth can be hidden, and it can also prevent odors.

1. If you want to dredge the drainage pipe, one of the most effective ways is to use a pipeline dredging agent, which is a more effective method I have used, which can quickly dissolve the blocked drainage forest pipeline.

2. Throw one or two effervescent tablets into the drain, such as stomach digesting tablets or various vitamin effervescent tablets (of course, if you don't have effervescent tablets, you can make some baking soda, and the effect is the same); Then pour in a glass of vinegar; After a few minutes, rinse it with hot water and the drain is smooth again.

3. The worst way is to poke it with a wooden stick and rinse it with plenty of water. Note that the stick must not be thicker than the drain pipe.

I believe that many people have encountered the problem of selling jujube with blocked pipes in their lives, which not only seriously affects our normal life, but also may cause conflicts between neighbors, so it needs to be dealt with in time. However, many people are helpless when they encounter this kind of problem, so how to dredge the blocked drain pipe? How do you prevent a clogged drain?

1. Use baking soda and vinegar.

Pour about 200 grams of baking soda into the pipe, then add some high-concentration vinegar, plug the hole and let it stand for about half an hour, and then rinse it with plenty of water to dredge.

2. Use alkaline tablets.

If the pipe is thick and hard, you can use alkali sheets, first pour a large amount of water into the stainless steel basin, then add an appropriate amount of alkali sheets, fully melt and pour into the drain pipe. Note that gloves should be worn when operating to avoid corrosion**.

3. Use dredging agents.

This method is very simple, just pour the dredging liquid into the drain, wait for about an hour, and then rinse with plenty of hot water, if the blockage is more severe, you can repeat it several times.

How to prevent clogged drains.

1. Before washing dishes, you should pour the leftover vegetable soup and soup into the trash, not directly into the sink. After washing, pour some hot water into the pipes to prevent oil from sticking to the inner walls of the pipes. In addition, it is best not to use soybean flour or bitter tea powder when washing dishes, as these can easily cause blockages when flowing into the pipes.

2. Regularly clean the drainage pipe with strong vinegar, first block the pool or sink, then fill it with hot water, add an appropriate amount of strong vinegar, and let it fully dissolve. Finally, remove the water plug, let the hot water melt and remove the grease from the pipes, and finally rinse with clean water.

Article summary: The above is the relevant content of how to dredge the clogged drain pipe and how to prevent the blockage of the drain pipe for everyone, I hope it can provide reference for some friends in need.