The kitchen drain is always leaking, is there any other way than to redo it?

You must know that although the kitchen is not only with water like the bathroom, it is also closely related to water. Yesterday, some netizens asked in the background whether there are some matters that need to be paid attention to when installing sink faucets.

1. The overflow hole refers to the drainage hole under the faucet, which is designed to prevent the water in the sink from overflowing the table top. A strainer is a filter device under the sink that prevents residue from clogging the pipes. These two places must be sealed well, otherwise water will seep into the cabinets, causing mold, moisture and even damage to the cabinets.

2. Sink: Anti-clogging is the key.

At present, most kitchen sinks are made of 304 stainless steel, and the basin is sturdy and durable, so there is basically no need to worry about the service life. The key is the drain device of the sink, many families habitually wash vegetables and dishes, directly let the residue flow out of the sink drain, long-term development of this habit can easily lead to drain blockage, water pipe leakage, sewer smell and other problems.

Therefore, when choosing a sink, you should consider the design of the sink outlet. For example, you can choose a solid waste storage basket with a sinking sink at the mouth of the sink, which can accommodate the solid waste that is washed down, and empty the garbage in the storage basket after each use of the sink, which can avoid too much solid waste from entering the sewer and causing blockage. Nowadays, more and more households are installing food waste disposers, which can break up solid waste directly, even if it is washed down from the water pipe mouth, it will not cause clogging.

In addition, the quality of the sewer pipe is also a key concern when purchasing a sink. If the quality of the water pipe is too poor, the long-term corrosion of food residue will also easily lead to water leakage, odor and other problems. Therefore, when choosing a sewer PVC water pipe, you should also pay attention to the quality of the product.

3. When installing two water inlet pipes, one end is installed on the faucet, and the other end is connected to two hot and cold angle valves or connected to two hot and cold joints.

4. Under normal circumstances, it can be cleaned off by wiping it with talcum powder. Therefore, it is necessary to try to avoid pouring decoration waste and waste water into the sink, not to mention blocking the sewer pipe, which is even more annoying if it corrodes the sink. The above is the introduction of sink leakage repair and sink maintenance tips, I hope it can help you!

There's no other way. Because other methods treat the symptoms rather than the root cause, the best thing to do is to redo it.

In addition to redoing the total leakage of the kitchen sewer, there is also a way to check the cause of the leakage, fix the leakage, and all the problems will be solved.

There is no other way, because if you can't do it well, you can only redo it, otherwise it will still leak.

1. It may be that the water pipe in the sewer has been used for too long, resulting in the aging or damage of the kitchen sewer pipe. 2. Maybe it is usually when the sewage is discharged, all kinds of food are discharged directly, and the drain pipe will cause wear and tear after a long time, and then it will lead to cracks and finally rupture. 3. It may be that the quality of the purchased tube itself is not good.

Kitchen drain leakage recommended treatment:

1. You can first check whether there are cracks in the pipe, if it is a small crack, you can use glass glue to solidify it, if the crack is very large, it is best to directly replace it with a new one, because you are not very useful in repairing, and it is not difficult, go directly to the hardware store to buy a model matching, and then install the steps for installation.

2. Remember to pay attention when using the sink at ordinary times, do not drain the hard food directly, the sewer can only drain the water, so as to protect the service life of the sewer pipe.

3. If the bowl is brushed, use hot water to pour it into the sewer, so as to dredge the sewer pipe, reduce the blockage, and usually clean up the garbage in the faucet regularly, it is very simple, as long as the faucet is removed, and then rinse it, and finally install it is completed.

There are many reasons why a water leak may occur if you reinstall your drain after recleaning it, and here are some common ones:

1.Improper disassembly or assembly: Improper disassembly or assembly of sewer pipes, such as not fastening the screws and washers at the joints, or not installing the sealant gaskets properly, can cause water to leak from the connections.

2.Aging pipes: If the kitchen sewer has a long service life, the pipe material is aging, cracks, etc., which will also lead to leakage of the bent shirt.

3.Incomplete sewer drain dredging: If the sewer line is not properly dredged, residual dirt and grease can cause a build-up inside the sewer pipe, which in turn can lead to a clogged pipe. When water flows through a pipe, it can cause increased water pressure inside the pipe, which can eventually lead to leakage.

4.Other faults: Leakage in sewers can also occur if the sewer pipes are not properly constructed, low-quality plumbing materials are used, etc.

For the problem of water leakage caused by different reasons, corresponding treatment methods can be taken. In order to avoid the occurrence of sewer leakage, it is necessary to pay attention to keeping the sewer clean and hygienic, and bury the cavity in time to remove the dirt and grease deposited in the sewer.

1. When washing things in the sink, drain things into the sewer, which will cause the sewer to wear and tear, and if it is a long time, there will be cracks, and then there will be water leakage when using water. 2. It may also be that the sewer pipe in the kitchen is used for a long time, so there will be aging and material deterioration. 3. Maybe the quality of the pipes installed at the beginning is not very good, and you may have bought defective pipes.

Suggested Treatment:

1. First of all, see if there are cracks in the pipe, if there are any glass glue, if there are big cracks, don't repair them, buy a new one directly, remove the old one first, and then install the new one.

2. Check whether the faucet connected to the sewer is broken, if so, then replace it with a new faucet, and then check it again to see if it is normal, or replace the valve core and shaft gasket in the faucet, the operation is not difficult, as long as the faucet is disassembled, and then use tweezers to remove the valve core, and then install a new one.

3. If it still can't be solved, then it is better to find a professional and let them come to help you check the specific problem, then it is easy to solve the problem.

1. The interface should not be installed tightly when the connection is installed, so there will be loosening when it is used, and there will be gaps after a long time, so there will be water leakage. 2. Or when washing dishes, the garbage is not picked up when discharging sewage, which causes the sewer to be worn out, which will cause cracks over time. 3. It is also possible that the water pipe has been installed for a long time, and the use time is also very long, so there will be aging.

Suggested Treatment:

1. Basically, there are cracks or damage in the sewer, if the crack is large, you can only buy a new one and replace it, if the crack is not big, you can buy some glue for cracks, and then solidify it, wait until the glue is dry, and then use water.

2. If the connection is loose, you can press it tighter, and use glass glue to tighten it, and don't touch the connection too hard.

3. If you don't know much about this aspect and can't find any faults, then you can contact the relevant technicians in time, so that they can send someone to assist you in repairing it as soon as possible.

How to deal with kitchen sewer leakage:

1. First of all, turn off the main gate of tap water, find a professional to investigate, and after finding the leakage point, you need to punch holes in the ground for maintenance.

2. During maintenance, wipe the leaking pipe, repair the leaking place with glue, and then wrap it with waterproof tape.

3. Next, open the sluice gate to test the water, observe for about 10 to 20 minutes, and after there is no water seepage, it can be sealed.

Tips for unclogging sewer pipes

1. When the pipeline is blocked, you can pour the pipeline dredging agent into the sewer pipe, if there is no water in the pipe, you should pour half a cup of clean water into the water pipe, wait for about 20 minutes, and then flush the pipe with a large amount of water. You can also put some caustic soda at the sewer pipe and pour a pot of boiling water into it, as long as the sewer pipe is dredged.

2. If the sewer pipe is blocked with some oil, pour boiling water directly into the sewer pipe, or you can buy some concentrated sulfuric acid, which can also play a good dredging effect by pouring these into the sewer pipe. Or go to the store to buy the powder to clean the pipes, it can be said that these ingredients are also lime powder, which can also play a good pipe cleaning effect.

Hello Kiss is happy to answer this question for you. <>

How to solve kitchen sewer leakage: 1. First of all, we must know that the water pipe is an open pipe or a hidden pipe, if the leakage point of the open pipe is easy to find, find the straight crack to cut off the pipe, and replace the new water pipe. 2. If it is a hidden pipe, it is necessary to determine the leakage place according to its own pressure, and then repair it.

3. Repair the wall after hot melt connection.