-
First of all. 1.Contact the property or the housekeeper of each building to turn off the main valve of their own water pipe.
2.Check the specific situation of the damaged place, whether the outer wire of the raw tape of the water switch is not tightened or the water switch is old, damaged, and leaking.
Solution: Replace the water switch (remember to wrap the raw tape around the outer wire and then tighten it), and the second is to unscrew the water switch in the damaged place and then re-wrap the raw tape.
-
This is a leaking triangular valve in your house, you can close this triangular valve. As for which valve downstairs is your home, it is recommended that you close the valve next to each water meter, if it is not your home, open it immediately, the time is short, and it will not affect other people's household water.
-
The kitchen sewer pipe has a slight burst of water pipe, the water flow is suitable, at this time, we must ask the maintenance worker to repair and replace the new water pipe in time, find the place where the water pipe is replaced, otherwise it may burst directly and cause flooding.
-
First close the main door of the house to prevent a lot of water from entering the house, and then take out the leaky door core and buy a replacement.
-
This should be the tap water pipe, from the first point of view should be the angle valve broken, the material is poor, the wire mouth should be broken, as soon as possible to find the valve closed, find the property department to replace it, there is no property to find the market to sell plumbing parts or community maintenance personnel to repair it
-
If the water pipe is damaged, it is generally necessary to replace the water pipe with a new one; The property can be contacted to close the valve.
-
Hurry up and close the sluice gate first, so as not to cause a big flood and overflow the golden mountain. Then go to a plumber to repair it.
-
There is a slight green explosion in the kitchen drain pipe, and the water pipe flows all seasons, what should I do? Find a plumber to repair it immediately.
-
Kitchen drain pipes, water comes out when the water flows a lot? There are similar friends to share what is going on, thank you!!
Hello dear, glad to answer for you. Kitchen drain pipes, water comes out when the water flows a lot? There are similar friends to share what is going on, thank you!!
The large flow of water in the kitchen indicates that the water pipe is not too smooth, that is to say, it is possible that because the area is not cleaned for a long time, there are some dirty things such as oil and high pollution, you can boil a pot of hot water to boil the water slide ruler, and then pour it into the vegetable basin and let it flow down the sewer pipe, so that after a hot oil stain will also flow down with the hot water, and you can use it normally.
-
1. The kitchen sewer backs up when you use it, which belongs to your own pipe blockage, and you can dredge it by using a small dredging machine.
2. If you are backwater when you have no water, the main pipe of the whole building is blocked, and the kitchen sewer pipe is easy to form grease, so it is recommended to use a high-pressure water truck to clean the pipeline, which is more thorough.
-
1. Rust and leakage of iron sewer pipes in old-fashioned buildings If it is an old-fashioned building, it may be that the original water pipes are corroded and cause water leakage. Because half of the old houses are cast iron sewer pipes buried in the ground, and the corrosion of iron products by sewage is serious, and it will rot when buried in the ground for a long time, resulting in leakage. The solution was to replace the iron sewer pipe with a better quality, corrosion-resistant PVC sewer pipe.
If you ask a decoration company to renovate, you should understand the workers, and it is best to understand the brand and quality of the sewer pipes used by the workers, so as to avoid secondary modifications. If you are renovating it yourself, you must first measure the size of the sewer pipe, and before the actual installation, connect it first, just in case it is installed incorrectly and it is troublesome to disassemble.
Second, sewer pipe design problemsAnother common reason for sewer pipe backwater is mainly sewer pipe design problems, such as the selection of unsuitable back-end pipe or even no back-bend. Because the drainage of the house generally relies on gravity drainage, the sewage will stay for a period of time when it flows down from the drainage riser into the drainage pipe, if the amount of sewage and sewage is large, it is easy to cause instantaneous congestion at the horizontal pipe, and the sewage and sewage are difficult to discharge for a while, if there is no anti-bend or the design of the anti-bend is problematic, it is difficult to discharge the sewage wine will come up. The solution is to ask the workers to check whether it is the problem of the diameter of the horizontal water pipe is too small or the problem of the design of the reverse water bend, if it is the problem of the horizontal water pipe, you can consider changing to a large diameter or slightly longer horizontal water pipe.
If it is a problem with the backbend, it is necessary to consider installing the backbend or replacing the backbend with a suitable diameter and structure.
Third, the inner wall of the pipe is rough, and there is a reason for the backwater of the kitchen sewer is that the inner wall of the sewer pipe is rough, which leads to the easy accumulation of dirt, and in the long run, the dirt blocks the sewer, resulting in backwater. In this case, the friends should clean the sewer pipe or replace the sewer pipe with a smooth inner wall and dirt that is not easy to deposit.
If you go up the water, you still need to find a maintenance worker to come to the door for maintenance, oh pro [hee-hee] [hee-hee] I wish you a happy life [hee-hee] [hee-hee].
I wish you a happy life [hee-hee] [hee-hee].
-
Kiss, <>
We're glad to answer your questions! Kitchen sewer pipe seepage This depends on the material of the drain pipe, the connection method, the location of the leakage, the area of the leakage, to decide how to repair, if it is a metal pipe, cracks appear at the straight pipe, you can use the same caliber of quick link pipe hoop maintenance, (also known as, soft connection interface) to clean the leakage around, the surface as flat as possible, open the soft connection of the outer metal hoop, the internal gasket on the pipe, and then put the metal hoop on the pipe, tighten the screws, Then there is the use of (Haval connection) maintenance, the function is the same as the above, but the material is more expensive, the quality is better--- if the socket is cracked, the simple and fast maintenance method is, take down the cracked part, clean up the socket, use (water does not leak), rapid coagulant, add water and reconcile, apply it to the leaking position and then fall off the water inlet part, reduce, bond firmly on the outside of the socket, use the hose clamp to tighten the old and tight, you can--- if the material is not complete, the fastest way is, use a piece of white iron, clear potatoes according to the circle to make an arc, the inner side of the rubber pad, the use of a few hose clamps to clamp it--- drain pipe has no pressure, it is easier to repair、-- expand information If there is a water seepage problem around the main sewer pipe in the kitchen, it is likely that the waterproofing at the sewer pipe interface is not done, or it is caused by cracking, and the water will seep out from the position of the combination of the pipe and the slab. In this case, it is recommended to fill the waterproof mortar around the sewer pipe, smooth it, and wait for it to dry before making a waterproof layer, and re-attach the floor tiles will generally not leak.
If the sewer pipe is ruptured and the water leaks, you can go to the hardware store and buy a water pipe of the same material to connect it yourself. Cut off the broken pipe first, put the interface into one end of the pipe, let the other end cut position and the other opening of the interface flush, straighten and then send the water pipe to one end, so that both ends have crossing. Use PVC glue to apply the inside of both ends of the sewer pipe and the outside of the two sewer pipes.
Hope mine can help you! <>
-
If the kitchen water pipe bursts or leaks, it is more troublesome, not only will the kitchen get wet, but also may damage the appliances and the floor at homeWhat to do if a kitchen water pipe bursts suddenly? How to quickly remedy a burst water pipe?We must deal with it in time to avoid excessive losses, and follow us to understand the treatment steps of water pipe bursting!
When faced with the unexpected situation of sudden burst water pipe, in order to avoid aggravated damage, it should be dealt with before the repairman arrives, according to the following steps:
1.Check first to see if the power is turned off. Because water conducts electricity and is prone to danger, turn off the power first.
Then start to check how much water leaks after the water pipe bursts, which is generally directly related to the water pressure in the pipe. Whether the water is dripping or gushing out, the most important thing to do at this point is to close the valve of the water main immediately and report it to the local property department.
2.Tie up the damaged part of the water pipe with special adhesive tape for repairing the water pipe.
3.In addition, the cracks in the water pipes can be repaired with fiberglass tape or ring gas resin adhesive.
4.If the burst water pipe is severe, you can wrap the cracked part of the water pipe with a towel. This prevents the water from squirting around, and also directs the water into the placed buckets, which can cause huge waste.
You can also close the valve of the main water pipe in the house to completely intercept the tap water in the house**.
5.If the reason for the burst pipe is that the pipe is too old, you should find a plumber to check and repair it in time.
How to replace a broken plastic water pipe.
A complete set of five methods for repairing and repairing water leakage from water pipes.
How to unclog a clogged kitchen pipe.
What should I do if the kitchen plumbing suddenly bursts? How to quickly remedy a burst water pipe
1. Buy a pipe dredger, which will be sold in hardware stores on the market, ** in more than ten or twenty yuan, it is a steel ring, the front end is dense, the back end is sparse, and it has a spiral hook. Also buy rubber gloves, because there are a lot of bacteria in the sewer to avoid getting infected. The special drainage agent for pipelines also needs to be purchased, and the double effect can cure the root cause. >>>More
1. Use a slender wire to hook up: After removing the large pieces of debris in the kitchen sewer, if it is still not smooth, you can use the slender wire to select the debris hook of the pipe. First, unscrew the corner cover of the drain, then thread the thin wire through the drain and pull it out from the corner opening, and pull it up and down repeatedly to make the kitchen drain pipe smooth. >>>More
First, a pipeline dredging agent is used. Clogged sewers are a nuisance. If not dredged in time, water accumulation will occur. >>>More
There are a few things to be clarified before dealing with this: >>>More
Because the rainwater pipes on the exterior wall are combined with the pipes in the house, it will make a rumbling or small stream sound when it rains, and it will generally sound like this in single-family villas and self-built houses. >>>More