How to flush a toilet without a tank, how to flush a toilet without water

1. How to flush a toilet without a water tank.

If you want a toilet without a tank to flush automatically, you can press the flush button on the side of the toilet with your hand, and then the toilet will directly use live water to flush the inside of the toilet bowl and the sewer pipe, that is, use the water from the water pipe to flush, and it can be flushed without interruption. There are also manufacturers who set toilets without a cistern to automatically flush once the user leaves the seat, or use a remote control to control them.

2. What are the advantages of a toilet without a water tank.

1. Save space.

The length of the toilet without a water tank is generally about ten centimeters shorter than that of an ordinary toilet, and the height will be about thirty centimeters shorter than that of an ordinary toilet, so a toilet without a water tank can be more space-saving, and the appearance of a toilet without a water tank will be more beautiful, so as to make the bathroom look more neat and natural.

2. Continuous water discharge.

When the toilet without a water tank is flushed, it is flushed directly with tap water, and it can be flushed uninterruptedly, while ordinary toilets generally have to wait for the water in the toilet tank to be full, and then they can be flushed.

Tips: If the user is in a city where there is a frequent shortage of water, or if the water pressure in the city is often unstable, it is not recommended to use a toilet without a water tank, otherwise it is often easy to cause the toilet to be flushed unclean or unable to flush. If you want to install a toilet without a water tank, you must first determine whether your home is suitable for installation.

Toilets without a cistern are flushed with a basin.

1. First of all, you can use the water stored at home to flush the toilet directly; If there is no water stored at home, you can also unscrew the water valve at the inlet and outlet of the water heater and flush the toilet. Of course, if there is water in the washing machine, it can also be used; Actually, I can't. I could only buy a large bucket of mineral water and pour it into the basin and flush it into the MA land bucket.

2. Or you can buy a large bucket of mineral water and pour it into the basin, and another way is to unscrew the water inlet and outlet of the water heater, and then release the water inside to flush the toilet, so that you can do it.

3. Put the water of the washing machine into the bucket and bury the pin. Open the lid of the toilet bowl and pour it in, and you can flush it. After flushing, fill the tank with water, and you're good to go. If the bucket is large enough, it can be flushed directly to the toilet.

4. If you really can't do it, you can swim to the neighbor's house to get some water, use the washbasin to draw water, and flush it at your own home.

5. In normal times, you can keep a bucket at home and store some water regularly for use when the water is stopped.

Hello dear, The toilet is generally divided into the following situations: 1. Slight blockage of the toilet: It is generally caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

Toilet toilet 2, toilet hard object blockage: accidentally fall into plastic residue ear brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Aging and blockage of the toilet: If the toilet is used for a long time, it is inevitable that the stove will be scaled on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

The toilet tank does not drain and the treatment method is as follows:

1. There is a lot of impurities in the water tank, which causes the water tank to be blocked. Clean the tank with a used toothbrush or some cleaning items.

2. The reason for the failure of the button on the toilet tank, the spring of the internal button loses its elasticity, and it is necessary to purchase a button of the corresponding size for a replacement.

3. If the inlet valve of the toilet is pushed to the lid of the water tank, then the toilet tank will not be filled with water. Adjust the position of the inlet valve so that the float or float of the inlet valve can move freely.

Toilet tank

Toilet tank fittings are the core part of the toilet, known in the industry as the "heart of the toilet", which is mainly composed of inlet valves, drain valves and buttons. Roughly, it can be divided into two categories: conjoined and split. Siamese fittings are used for Siamese toilets.

Split fittings are used for split toilets. The inlet valve part can be divided into side inlet and bottom inlet, and there is also rear inlet.

The drain valve part can be divided into double press type, chain type and bucket type. The button part can be divided into side buttons, top buttons and front buttons. The water inlet valve is a device used to automatically control the water inlet of the water tank, when the water level in the water tank is low to the working water level, it will automatically start the water intake, and automatically stop the water inlet when the water level reaches the working water level.

The drain valve is a drain device used to control the water tank, which can discharge a pre-set amount of water when opened and can be automatically closed. The maximum water level height that can be reached when the water in the water tank has overflowed under the condition that the static pressure is full, the inlet valve is fully open, and the drain valve is completely closed, which is simply recorded as SL.

Yes, the tap water is to automatically add water to the water tank, and of course there is no problem with manual refilling.

The flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, water plug (inlet and outlet), float, drain knob and lever, water refill mechanism, water tank, urinal (the urinal has a bend that connects to the water tank).

The basic principle of the flush toilet is to use the gravity of the water to convert the potential energy of the water into the kinetic energy of the water, so as to carry the excrement into the sewer pipe.

Yes, the toilet tank is actually automatically added to the water tank by the water pipe, and you are now changing to manually add water to the water tank, which plays the same role.

Yes, it usually takes about 3 liters for one flush, so 6 bottles of water are required.

Yes, the water is automatically added to the water tank, and there is no problem with manual refilling.

Yes, no questions asked!

Just add it to almost full.

The problem you're talking about isn't complicated at all, as long as you do the following:

1.You have to make sure that there is tap water, turn on the tap water switch, that is, the angle valve, 2Press the lid of the water tank to open it, and you can see the accessories inside the water tank The toilet tank accessories are generally divided into three parts, the first is the drain valve, which is directly below the lid button, and the second is the water inlet valve, which is the one connected to the hose outside the toilet next to the drain valve, and the third is the button

3 Check that after the toilet lid is closed, will it reach the inlet valve? If so, just adjust the inlet valve and see if the inlet valve's float or float will move up and down freely? This is the key, because if you get stuck, the water will not get in, and generally the floating bucket has an adjustable crosseye that can adjust the height of the floating bucket, and you should be able to rotate it in the direction of the clock, and the problem should be solved

Your toilet is newly installed The current toilet has been tested before leaving the factory It is unlikely that the inlet valve is bad It is mainly caused by improper installation by the installer You can do it yourself If you don't understand, you can send me a message My ** shop: Xitao Tao Sanitary Ware Home.

1. a filter.

Many toilet refillers have a filter inside, and the filter will be clogged with too much limescale after being used for a long time, so that tap water cannot come in. Just remove the strainer and clean it.

2. a piston. Open the lid of the toilet bowl and observe that there is no water on the tank. Whether the piston can be plugged. If it can't be plugged, it will leak, the water tank is not satisfied, and the switch can't reach, so it won't be watered.

3. Float. Open the toilet lid to check whether the float sinks to the bottom when the water tank is empty, if it is still above when there is no water, it means that the float is broken, and it cannot sink and the upper water outlet is always closed, so there is no water.

4. a water inlet valve.

Check if the toilet lid will reach the inlet valve, and if so, adjust the inlet valve. Then look at whether the float of the inlet valve will move up and down freely, because if it is stuck, the water will not be able to enter.

Open the top, there is a valve inside, and you can flip it yourself with your hands.

The solution to the toilet tank not watering is as follows:1. Close the angle valve first, remove the angle valve with a tool, and check whether the angle valve is rusty or scaled.

2. After the angle valve is disassembled, replace it with a new angle valve, and there is a filter screen under the toilet tank, remove the filter screen, and then rinse it with clean water.

When buying a flush toilet, you should pay attention to the appearance gloss of the flush toilet, generally the higher the gloss, the better the quality, and the longer the service life.

Hello dear, I'm glad to answer for you, please wait a moment, and answer for you immediately.

Dear, when the toilet does not have the problem of water, we have to first see if the water in your home is off or someone has turned off the inlet valve, if this is the case, then there is no water must not be on the water, this you have to pay attention to the owner group to see when the water comes or open the inlet valve yourself. Of course, this rarely happens, but we can't rule it out, and we still have to check it. After the previous situation of no water is ruled out, we can give priority to the problem of the water tank, we open the lid of the water tank, check the filter screen of the water tank, the toilet tank will be practical for a long time, and the water rust filter will be blocked, resulting in the water tank not watering, we can remove the filter first, let the water first, after flushing the toilet, we are cleaning the filter screen, and install it after cleaning.

What to do if you don't get water from the water tank, you can first check whether the water pipe is open, if it is really not watery, then you can only find a repairman to repair it.

If the flushing toilet doesn't have a cistern, there may be some problems, for example: the toilet may not have a built-in cistern, or it may have broken down. In this case, here are some things you can do to fix the problem:

1.Contact a professional: If you don't know how to deal with this, your best bet is to seek help from a professional. A plumber or renovator with relevant experience can be contacted to resolve the issue.

2.Install a built-in cistern: If the toilet doesn't have a built-in cistern, you can consider purchasing and installing one. The built-in cistern allows your toilet to be equipped with a water storage tank that can be connected by a single pipe for smooth flushing.

3.Check the water pipes: If the toilet already has a built-in cistern, but it gets stuck or the water is not flowing, then you can check the water pipes for blockages or blockages. If a blockage is found, you can use a water tool or some special detergent to open the water pipe.

4.Replace the toilet: If the toilet is old or badly damaged, then you may want to consider replacing it with a new flushing toilet. Of course, before you buy a new flush toilet, you'll need to check that it comes with a built-in cistern.

Finally, it is important to note that you must be extra careful when dealing with the problem of the flush horse erection bucket not having a water tank. Try not to do it yourself, and if you are unsure, it is best to seek professional help.