Why is there no water in the water tank of the dehumidifier

Specifications: Model: Quantity:

Brand: Packaging: **:

In the process of using the dehumidifier machine, many users have encountered different problems, but the final result is that there is no water in the dehumidifier tank, that is, the dehumidifier is on but not working. So what's the problem? There are generally 3 reasons why the dehumidifier does not produce water:

1.Due to the overload of the machine and equipment, the internal temperature of the machine is too high, resulting in the high temperature protection of the machine itself, which is not a problem of the machine itself, just press the high temperature protection button inside the machine. 2.

Due to the quality control of the machine itself, the oil seal plate is burned out, this situation is not difficult to solve, just reflect with the sales staff at that time, they will replace the control board for you free of charge, so that the machine can operate normally. 3.The industrial dehumidifier for trial work will not start because the set humidity is too high, and the set humidity is already greater than the current humidity.

This is not a malfunction of the machine, but the result of not using it correctly according to the manual.

Dehumidifiers. Causes and solutions to the lack of water in the tank:

1. The inlet valve is broken, replace the inlet valve.

2. The inlet water pipe is blocked, clean the inlet water pipe.

3. The water is cut off.

4. If the water pressure is not enough, check the water source.

5. The water level switch is broken, replace the water level switch.

If it is not clean, the dehumidifier itself is to adsorb moisture in the air, and it will be polluted by the compressor and heat converter.

Condensation in the air is similar to rain!

The water is clean at first, but it comes out polluted.

It may be because there is something dirty inside the humidifier, such as dust or something. It's also possible that the water quality you use regularly is not good, and with limescale, the humidifier is blocked. Finally, you can check whether the atomizer sheet of the humidifier has been burned.

In fact, the humidifier does not produce water is a very common failure, generally speaking, the main reason is mainly in two aspects, on the one hand, the humidifier is not regularly cleaned and maintained, the atomizer can not produce water normally, and the other reason is that the fan is not running and the fan is damaged.

If the humidifier does not fog out, it depends on what type it is, if it is electrically heated, whether the heating device is not working or damaged. If it is an ultrasonic humidifier, it may be that the ultrasonic part is not working or damaged, and there is no way to produce ultrasound, so there is no mist (water particles) ejected. In addition, if the air outlet is blocked (whether it is fouled or not), the mist will not be able to eject out.

In short, it is better to send it to the relevant special maintenance department to deal with it.

The humidifier has wind and no fog, which may be due to the fact that the tap water has been used for too long and the water alkali has formed on the ** tablet. In this case, you can use household white vinegar with a little salt, which can dissolve the water alkali well, and it should be noted that strong acids cannot be used.

The humidifier atomizes water by a piezoelectric ceramic sheet, which is a yellow metal sheet the size of a one-yuan coin at the bottom of the fogging tube.

The humidifier does not come out of the water because you did not add water or you look at the instructions. You know what's going on.

Water from the dehumidifier can be used for watering flowers, flushing toilets, etc., but it is best not to drink it. The water of the dehumidifier is the water that is treated after being sucked in by the fan, filtered by the air filter, cooled and dehumidified on the cooled evaporator, and condensed into the excess water vapor in the air, which belongs to distilled water. Since the water from the dehumidifier may contain bacteria and viruses in the air, it is not recommended to drink it.

Dehumidifiers can usually be divided into industrial dehumidifiers and civil (household) dehumidifiers according to different power requirements. The working principle of industrial dehumidifiers includes internal circulation and external circulation.

The working principle of the household dehumidifier: the humid air is pumped into the machine by the fan, and the water in the air is condensed into water droplets through the heat exchanger, and the treated dry air is discharged out of the machine, so that the indoor humidity is reduced.

Summary. 1. Indoor humidity is not engaged.

If the humidity in your home is not very high, even if you use a dehumidifier, it will not be dehumidified, which means that the dehumidifier will not work basically, so there will be no water droplets.

2. Whether the humidity is set correctly.

When the humidity you set is higher than the current humidity, the dehumidifier will not work, which is not the fault of the dehumidifier itself but the improper use method.

3. Overload operation of machinery and equipment.

The high temperature inside the machine leads to high temperature protection of the machine itself, which is not a problem of the machine itself, it can be restored by simply pressing the high temperature protection button inside the dehumidifier.

4. The quality control board of the dehumidifier is damaged.

The quality control board of the dehumidifier is damaged, which needs to be replaced by professional after-sales personnel, and it can be used normally after installation.

5. The compressor is damaged.

If it is confirmed that the compressor is broken, the cost of repair is very high, and if the dehumidifier at home is too old, it is recommended to replace the equipment again. Even if the aging of the components inside is repaired, new problems will appear, and it is more appropriate to replace it with new equipment.

6. Refrigerant leakage.

You can open the face cover of the dehumidifier and observe whether there is an oily substance around the compressor. If it is due to the leakage of refrigerant, weld the leakage place first, and then add the refrigerant.

Why doesn't the dehumidifier come out of the water? How can this be solved?

Hello dear, thank you for your patience, this problem is back from me, the reasons for the dehumidifier does not produce water are generally: 1. If the indoor humidity is not very large, even if you use the dehumidifier, it will not be dehumidified, which is the dehumidifier basically will not work, so there will be no water droplets. 2. Whether the humidity is set correctly on the dehumidifier has a setting of humidity, when the humidity you set is higher than the current humidity, the dehumidifier will not work, this is not the fault of the dehumidifier itself but the improper use method.

3. The overload operation of the machine leads to the high temperature inside the machine and causes the high temperature protection of the machine itself, which is not the problem of the machine itself, just press the high temperature protection button inside the dehumidifier to recover. 4. The quality control board of the dehumidifier is damaged, and the quality control board of the dehumidifier is damaged, which needs to be replaced by professional after-sales personnel, and it can be used normally after installation. 5. If the compressor is damaged, if it is confirmed that the compressor is broken, the cost of maintenance is very high, and if the dehumidifier at home is too old, it is recommended to replace the equipment.

Even if the aging of the components inside is repaired, new problems will appear, and it is more appropriate to replace it with new equipment. 6. Refrigerant leakage can be judged by opening the face cover of the dehumidifier and observing whether there is an oily substance around the compressor. If it is due to the leakage of refrigerant, weld the leakage place first, and then add the refrigerant.

Everything is running normally, and the display temperature is always 90, how to set.

What you said should show that the humidity is 90, which can be appropriately lowered, and the comfortable humidity for people is generally about 40 to 50.

The dehumidifier shows that the water is full, but there is actually no water inside.

Hello, I'm glad to answer for you, the dehumidifier shows that the water is full, but the actual reasons for no water in it are as follows: 1. The inlet valve is broken, replace the inlet valve. Be cautious 2, the inlet water pipe is blocked, clean the inlet water pipe.

3. The water is cut off. 4. If the water pressure is not enough, check the water source. 5. The water level switch is broken, replace the water level switch.

Expansion: Mu early stove dehumidifier, also known as dehumidifier, dryer, dehumidifier, can generally be divided into two categories: civil dehumidifier and industrial dehumidifier, which belongs to a part of the air-conditioned family. Typically, a conventional dehumidifier consists of a compressor, a heat exchanger, a fan, a water container, a casing and a controller.

It works by a fan that draws humid air into the machine and passes it through a heat exchanger

Summary. Hello, I am happy to serve you If the ambient temperature exceeds the working temperature of the dehumidifier, the working temperature of the dehumidifier is 5 35, beyond this range the dehumidifier is not working the dehumidifier, at this time the screen appears ** prompt, cl ch means lower than 5 or higher than 35, the dehumidifier can not work.

Hello, I am happy to serve you If the ambient temperature exceeds the working temperature of the dehumidifier, the working temperature of the dehumidifier is 5 35, beyond this range the dehumidifier is not working the dehumidifier, at this time the screen appears ** prompt, cl ch means lower than 5 or higher than 35, the dehumidifier can not work.

Are you there. If the water is full, it will not work for dehumidification, and the water tank will turn on a red light when the water is full, and the water will be used normally after the water is poured.

Are there any faults displayed**? Kiss.

The tank is empty.

The tank is empty, you add water and try it, it won't work without water.

You see, the water tank will turn on the machine without working dehumidification, the water tank will turn on the red light when the water is full, notify the pouring water, and the water will be used normally after the water is poured.

Add water? The displayed humidity is 78

The temperature is below 35

The temperature is below 35

Dehumidification and drying clothes cannot be used.

You see if the dehumidifier temperature sensor is failing, which dehumidifier you are, I'll help you see.

You can also contact their service center.

1. Generally speaking, the dehumidifier excludes the water after the condensation of water vapor in the air, that is, distilled water.

However, the water discharged from the dehumidifier may contain airborne bacteria and viruses.

It is not recommended to drink it directly, and it can be boiled to drink state lead when necessary. Wooden furniture, clothing, and household appliances are prone to mold in a damp room for a long time, so it is recommended to dehumidify more.

2. Distilled water is the water that is distilled and condensed, and the second distillation is called re-distilled water, and the third time is called triple distilled water. Water with low oxygen consumption, potassium permanganate added.

Industrial distilled water with acid is made by the distilled water method. (Simply put, it is a small droplet of water that liquefies after boiling) When steaming rice, the water droplets on the lid of the pot are distilled water when steaming the buns.

Hello! What is the reason why the dehumidifier does not dehumidify1, the air inlet and outlet grilles are broken, if you find that the dehumidifier cannot be dehumidified normally, you must first check the ventilation system of the dehumidifier. Because the air inlet grille and the air outlet grille will generally be damaged with the extension of the use time, the damage of the air inlet and outlet grilles will also affect the closed work of the dehumidifier, so it is okay to replace it with a new one at this time.

2. The filter screen is blocked or damaged in some areas, and there is a lot of dust in some areas, if the dehumidifier is used in these areas, the air filter screen of the dehumidifier will be blocked by a lot of dust, and the air flow will be greatly hindered, resulting in poor dehumidification effect. At this time, it is necessary to clean the air filter, clean it with clean water or blow it with air, and restart it after cleaning, so that the function of the dehumidifier will be restored. It is very common for the filter to be clogged by dust, and if it is damaged, it should be replaced.

The second is to see whether there is icing and dust on the surface of the evaporator. The blades of the small dehumidifier sometimes have serious dust accumulation and the blades are stuck. 3. Check the working condition of the compressor and fan, and check the power supply and the car base.

If it is a refrigeration system failure and compressor failure, the user generally cannot solve it by himself, so it is necessary to hire professionals to repair it. 4. There is also a possibility that the dehumidifier is placed in an unreasonable position, some users place the dehumidifier in the corner of the room, and the moisture in the room is not easy to flow to the dehumidifier to remove the moisture, if there is an obstacle blocking the air duct in and out, the amount of air through the dehumidifier will be reduced even more, so that the air temperature after the condenser is heated will rise higher, which will lead to the decondensation effect becoming worse, and the dehumidification effect will also become very poor. At this time, it is necessary to adjust the position so that the dehumidifier can give full play to the dehumidification effect that the dehumidifier should have.