-
We're sorry, but Samsung's official website doesn't provide flashing software. Due to the risks associated with flashing, such as mobile phone problems caused by self-flashing, it may also affect the repair, so we do not recommend that you flash your phone by yourself.
If the mobile phone cannot be used normally due to system failure or causes problems with the mobile phone after flashing the phone by itself, it is recommended that you send the machine to the after-sales service center for the help of the engineer to check and deal with it.
Supplement: Some third-party** or forum provided flashing packages, due to non-Samsung official original system, there are instability, compatibility problems, if you are not a professional, it is not recommended to try to flash.
-
According to your description, there are many factors that cause the phone to not turn on, such as the battery, the phone's software, and the hardware.
We recommend that you try the following:
1. Replace a mobile phone battery of the same model for testing.
2. Take out the battery, clean the metal contacts of the battery with a rubber and test.
3. Take out the SIM card and SD card at the same time, and then press the power button for more than 10 seconds to test whether it can be turned on.
4. Take out the battery, charge the battery with universal charge for about 30 minutes, put it in the mobile phone, and test whether it can be turned on or charged.
Hope it helps.
-
There are many factors that the mobile phone cannot be turned on, and the battery, mobile phone software, and hardware will cause this kind of failure to turn on.
-
Since the network supported by the mobile phone is determined by the hardware, it is not possible to crack the software or upgrade the software system to make the mobile phone support the network of other operators.
-
The solution to the problem of not being able to enter flash mode:
Press the volume down button + home button + power button to enter the warning. Press the volume down button to restart, and press the volume + button to enter the coal digging mode.
Press the volume + key to enter the coal digging mode (that is to say, the line must be brushed,) The coal digging mode is downloading,Don't move when you get to this screen。
Then press the volume down button + home button + power button, you will enter the recovery interface option, to this interface is easy to get, enter this wipe data factory reset (restore factory setup mode) (volume - is to move down, volume + is to move up, power key is OK),.
After entering the wipe data factory reset mode, you will see a string of no interfaces, click -yes --delete all user data, OK, OK, (after reading the following, don't buckle the battery, it's over).
After the previous step is confirmed, it will return to the interface, and then confirm -reboot systea now (now reboot the system) is good, and you can use the phone.
-
This is already flash mode, connect the computer and use odin to swipe!
-
Sorry, there is no relevant information on the official website. If there is a problem with your mobile phone system, it is recommended that you bring the repair card, purchase invoice and mobile phone to the nearest Samsung mobile phone customer service to test the mobile phone, and the engineer will solve the problem.
-
Friend, can you specifically say which model of Samsung? Some machines, such as the S5660, will display yellow dowloading!
-
Hello dear Samsung users:
Unfortunately, there is no information available on the official website. If there is a problem with your mobile phone system, it is recommended that you bring your repair card, purchase invoice and mobile phone to the nearest Samsung Electronics Service Center and have the engineer solve the problem.
It is recommended that you apply for "appointment to store" on Samsung's official website to enjoy priority repair services
After the appointment is successful, please bring your machine, invoice and warranty card to the service center where you made the appointment on time.
Comments, suggestions, complaints, please click:
-
Have you changed the battery If you still can't replace it, go to the after-sales repair You are a national bank or a parallel import.
1.Charge with a cable charge for a while and try to turn it on, or replace a phone battery of the same model. >>>More
Hello dear Samsung users:
Depending on the situation you described, you can try the following: >>>More
Hello, Samsung's official website does not provide flashing software. Due to the risks associated with flashing, such as mobile phone problems caused by self-flashing, it may also affect the repair, so we do not recommend that you flash your phone by yourself. If the phone cannot be used normally due to system failure or the phone has problems after flashing the phone by itself, it is recommended that you send the device to the Samsung after-sales service center for an engineer to help check and deal with it.
2.Memory: Total ROM is about 4GB, actual usable approx. The total RAM memory is 1G, the actual display is 851MB, and the maximum usable is about 340MB; External memory card: >>>More
1.Charge with a cable charge for a while and try to turn it on, or replace a phone battery of the same model. >>>More