Interesting knotting methods, six ways to tie knots

The six ways to tie the knot are as follows:1. Single knot. <>

Intersect the end of the rope with the rope, thread it through the loop of the rope, tie it into a knot, pull it tight, and finish.

2. Double single knot.

Overlap the ropes and bend them to tie them so that even if the ends of the rope are tightened, the rope loops will not be able to withstand the force.

3. Multiple single knots.

Tie into countless knots and wrap them constantly, and as long as you increase the number of wounds, the knot shape will become larger.

4. Fix a single knot.

Tie the ropes on top of each other and pull them tight.

5. Continuous single knot.

Wrap the rope into countless small circles, thread one end of the rope into the loop of the rope, and pull it tight.

6. Flat knot. <>

Prepare two ropes, wrap the ends of the rope and pull it together, cross the ropes, and wrap them one more time above the crossing. At this time, if the winding direction is wrong, the result will become a layman's flat knot, please be especially careful; Hold both ends of the rope and pull it tight.

The five commonly used knotting methods include broken knots, hanging knots, sealing knots, lock knots, and net knots.

1. Break the knot.

It is suitable for the situation that the rope is worn and about to break, and the rope is folded in half at the breaking point. Rotate your left hand twice, fold to the right, and pull the break point out of the hole. In this way, there is no fear of the rope breaking, and it is strong and practical.

2. Hanging rope knot.

Start by placing the rope under the bottle and tying a knot in the cap. Then put the knot on the mouth of the bottle, and the second bottle is the same, which is the most suitable for storing bottles and cans hanging at home.

3. Seal the knot.

Start by rotating the rope one at a time to fix it with one hand and flip the rope over with the other hand. Form a figure-of-8 shape, overlap two coils, and form a sealing knot. Even if it is on the wrist, it will not be easy to break open, and it is the most suitable key for sealing and packing, and the advantage is that it is firm and not easy to loose.

4. Lock the lasature.

This dry and bright knotting method is mainly used in the lock sleeve heavy objects, and the advantage is that it is firm, not easy to slip open, and can be easily opened.

5. Net bag knot.

**Flip the cross once at one end of the circle and place the pot on the intersection, reserving the rope for about two-thirds of the length of the pot. The other side is flipped over and threaded from top to bottom, leaving two coils on both sides, and then turning over and pressing on the coils on both sides. Then pull out the rope from top to bottom, and the rope is like a net pocket firmly encased in the flower pot, which is suitable for hanging the green plants at home.

The various ways to tie knots are detailed as follows:

1. Overhand knot

The simplest knot is a single knot. The simplest way to use this knot is to tie a knot in the rope, but don't pull it too small because of its simplicity. It can be used as a rope bolt, to prevent slippage, or as a temporary way to prevent the end of the rope from falling off, and it is also widely used in unexpected situations.

2. Multiple overhand knots

Increase the number of windings (about 2-4 times) and tie into larger knots. In order not to break the knot, it is necessary to "tidy up while tying the knot" as the point of argument for regripping. This knot is used as a grip on the rope, or when the rope is to be thrown far away to increase its strength.

3. Noose

A simple snare knot. Pull the tip of the rope to make a circle, there is nothing in the middle of the circle, and the knot can be untied by pulling the rope.

4. Double single knot (loop knot).

The double single knot is used to make a knot in a circle, but it is better to avoid the use of rope damage. Its knotting method is very simple, as long as the rope is folded to a single knot. In this case, if the loop part is the damaged part of the rope, it is not possible to exert force, so you can still use the rope with peace of mind.

Knotted knots** are as follows:

Poor tools: ropes.

Word knots. <>

Press the end of the rope to form a rope loop and wrap the rope around the rope trunk, and then put the rope end back into the rope loop to tighten.

2. Single bartack.

Make a small loop first, then pass the end of the rope through the small loop around the rope stem, and then thread it back on.

3. Double bartack.

Make two loops, overlap them and put them on the object to complete the double bart.

4. Double half knot.

First, wrap the end of the rope around the object for two weeks, and then tie two half-knots on the root of the rope.

5. Lilac knots.

Tie a clove knot on the bollard, you can use both hands to pull the rope in the same direction and cross the overlapping blue file, and then put it on the bollard to tighten it.

6. Flat knot. <>

Commonly used knotting methods:

1. The single knot is the basic knot of all knots, also called the half knot. The single knot has the longest history in the knot, and it is also the easiest knot. However, the disadvantage of a single knot is that it is easy to loosen, so it is often used in conjunction with other knots.

2. The knot is a knot used to connect two ropes of different thicknesses and materials, and it is the oldest knot. It is characterized by its simple play, sturdy and reliable, and very easy to disassemble. It can be used to connect ropes of different materials and thicknesses.

3. The interspersed knot is a variation knot of the knot, which is used to connect two strings. This knot is a mixed figure-of-eight knot to prevent the end of the rope from becoming entangled when the rope is pulled.

The word knot is one of the knots that will be learned at the beginning of outdoor sports such as mountaineering and rock climbing, and is mainly used for anti-slip, preventing ropes from falling off, connecting the main rope and seat belt. The disadvantage is that it is difficult to unravel after heavy loading.

5. Wrapping the figure-8 knot is often used in rock climbing and cave exploration, and is used at the end of the rope or around the object, and the shape is not good for a fixed rope loop. This is a rope end knot that is suitable for anchor points.

6. The Italian half-knot, also known as the single-loop knot, is simple to operate and has high efficiency, and is often used in the top rope protection of the mountaineering rope team. When used as a top rope securing, it can only be used without a crash and is not suitable for pioneer protection.

7. The human knot is known as the king of knots, and it is one of the most widely used knots in the world, especially when climbing mountains and boats, so it is also called sail knots or ship cable knots.

8. The camp nail knot is used at the end of various cable-stayed ropes, and the knot position can move up and down on the rope, and the tightness of the rope can be adjusted at any time.