-
Put a few boxes of plasticine.
Mix it up with him, and it will become more and bigger.
When I soften it with plasticine, 01
Roll into thin slices. If you want to quickly poop dry and hard plasticine, you can directly spread a layer of plasticpaper on the table, then put plasticine, and then layer of plasticine on top of the plasticine. You can use a rolling pin or a wine bottle to roll the plasticine into thin slices.
Then spray some water on top of the plasticine sheet, and after a while, the plasticine will soften.
Wet towels. If the plasticine has become dry and oily, but you want to become soft, in this case, you can directly prepare a towel, then soak the towel in water, and then squeeze out some of the water on the towel, and then spread the wet towel on top of the dry and hard plasticine, and after a while, the plasticine will become soft.
Quill. If the plasticine becomes particularly dry and hard, and you want to restore the plasticine to a soft state, in this case, you can directly take a brush, and then use the brush to dip a small amount of water directly on the dry and hard plasticine, and after a while, if the plasticine has not become soft, repeat the above steps. After a few repetitions, the plasticine will become soft.
Saran Wrap. If you want to make the dry and hard plasticine soft, you can spray some water directly on top of the plasticine, and then wrap the plasticine in plastic wrap, and let the plasticine soften for about a day.
Face steamer. If you want to soften the dry and hard plasticine, in this case, you can directly put the plasticine on the outlet of the facial steamer, and steam the plasticine with the facial steamer for a while, and the plasticine can slowly become soft, this method is more suitable for the use of plasticine in a state that has not become particularly dry and hard. If the plasticine is particularly dry and hard, it is best to remove the extra dry and hard part of the plasticine and then steam it with a facial steamer.
Knead the plasticine. If the plasticine is not particularly dry and hard, but it is not as soft as before, if you want to restore the plasticine to its previous softness, you can directly spray some water on the plasticine, and then knead the plasticine repeatedly, if the plasticine is still relatively dry, you can spray some water and continue to knead, and after a while, the plasticine can become soft.
Cooking oil. If the plasticine has become dry and hard, you want the plasticine to return to its previous soft state. You can spray some cooking oil directly on the plasticine, first let the cooking oil have been soaked in the plasticine, and after a while, wait until the photo is a little soft, then repeatedly knead the plasticine, and then spray some water on the plasticine, and knead it several times, and the plasticine can return to its previous soft state.
Warm. If you want to soften the dry, hard plasticine, you can throw the plasticine directly into a plastic bag. Then prepare some warm water and throw the plastic bag with plasticine directly into the warm water to soak for a while, and it won't be long before the plasticine can become soft.
-
How can I make plasticine bigger and bigger? I think you should consider this problem, if you want to make the playdough more and bigger, you have to buy more plasticine, so that it will become more and bigger.
-
If you want to make the plasticine bigger and bigger, the best way is to ask him to add a little more juice. Then he will get bigger and bigger.
-
If you want to make the plasticine bigger, I think you can knead them a few more times and the more you knead them, the bigger they will become.
-
The way to make the plasticine bigger and bigger is to buy a new one and mix it up so that it gets bigger and bigger.
-
Add some water, and then some glue (slimes can use this method, plasticine can't).
I had to buy some more plasticine and mix it up.
-
You can buy another plasticine, and the two plasticines will get bigger when they are mixed together.
-
It is actually impossible for the plasticine to become larger. Unless. When I'm playing, I add 1 new feeling and get bigger.,In fact, it's still the same.,It's equal to two points.。
-
If you want to make your playdough bigger and bigger, spend money to buy some more from the store.
-
In the case of plasticine, if you want to make it more and bigger, you can put several plasticines together.
-
How can I make plasticine bigger and bigger? You soak the plasticine. Look at a lot, and that's it.
-
Time is a good thing, he tells us, the people we love can be replaced, we are always afraid of losing someone, but ask ourselves, who is afraid of losing you, why overestimate yourself, and why bother to forget.
-
The plasticine itself is so big, it's impossible for you to make it bigger and more numerous.
-
The following words are as big as they are, and it is impossible to get bigger anymore.
-
1. First of all, use the mold to make a heart shape on the plasticine.
2. Then prepare a small bowl for later use.
3. Then add an appropriate amount of baking soda to a small bowl.
4. Next, pour an appropriate amount of water into a small bowl to dilute and dissolve the baking soda and prepare it into an aqueous solution.
5. Then put the plasticine into the baking soda water and soak it for ten minutes, the baking soda can make the plasticine quickly harden and set.
6. Finally, after taking out the plasticine from the small rough soda, it was found that the plasticine had hardened, and the stool was burned as shown in the figure below.
-
Plasticine is a very classic toy, and for many later people, it is an indispensable toy in childhood.
But if you're looking at how to make playdough soften quickly, it's simple:
First of all, the reason why the plasticine hardened is nothing more than forgetting to cover the lid.
So, we make the plasticine soft quickly, there are several ways:
Put a wet towel over the dry plasticine, and in less than half a day, you can use it again.
Use a small brush dipped in water to brush the surface of the plasticine, a small amount of several times.
Pack the plasticine in a plastic bag and soak it in warm water for half a day to soften.
Spray some water on the plasticine, then cover it and let it soften after a day in the sun. If not, repeat the above steps several times.
You can add some cooking oil appropriately, and then add water may have a better effect.
Add the plasticine repeatedly and do not add too much water at first, soak the surface each time. Add water gradually.
7. Put the plasticine at the mouth of the thermos to steam with steam, then knead it thoroughly, and it is best to remove the skin that is too dry.
8. Maybe the dough (plasticine) will fade when it is wet, but rub the water vapor into the mud, and after kneading, the color on your hands will return to the mud.
9. Spray water with a small nozzle, wrap it in plastic wrap, and it will become soft after a period of time.
In the end, as long as you master these methods, you will no longer have to worry about plasticine becoming hard after not playing for a long time.
-
Just put a wet towel on the plasticine, and it will soften in less than half a day. It's available to play!
-
Add water mixed with water and glue and soak for a while.
-
Wrap in a damp towel or plastic bag and place in warm water.
-
It depends on what kind of plasticine it is. 2.The lid of the eraser is opened, covered with a black cloth, and dried in the sun, which can be soft for half a day.
1.Add a small amount of water dropwise. Drop slowly.
Add a small amount of 2 drops Don't add too much water at first, soak the surface each time. Add water gradually and pinch repeatedly. Another good way is to add some cooking oil appropriately, and then add water may have a better effect.
3. Cover the dry plasticine with a wet towel, and you can use it again without half a day
-
What to do if the playdough dries up, teach you a trick to make the playdough soft easily.
-
Summary. Hello dear, rub with your hands. If the plasticine is not particularly dry and hard, but it is not as soft as before, if you want to restore the plasticine to its previous softness, you can directly spray some water on the plasticine, and then knead the plasticine repeatedly, if the plasticine is still relatively dry, you can spray some water and continue to knead, and after a while, the plasticine can become soft.
Hello dear, rub with your hands. If the plasticine is not particularly dry and hard, but it is not as soft as before, if you want to restore the plasticine to the previous softness, you can directly spray some water on the plasticine, and then after the collapse of Zen, like kneading the dough, repeatedly knead the plasticine, if the car's dust plasticine is still relatively dry, you can spray some water to continue kneading, and after a while, the plasticine can become soft.
How you can play more and more.
Roll into thin slices. Together, again.
How to make crystal mud.
Add borax to the container, melt it with hot water, add pigments and makeup remover water to the glue, pour it into the boron sand water after stirring evenly, soak it for a while and then take it out, and then let it stand for a while.
-
1. Wet towel.
A wet towel softens the hard plasticine. Soak the towel in hot water for a period of time, wait until the towel is covered with water, twist it a few times, and then put the hardened plasticine into the towel and wrap it, during which the towel can be wrung out and continue to dip the towel in hot water, after several times, the plasticine can become soft.
2. Sparkling water.
You can use the weak alkalinity of soda to neutralize the acidic substances in the plasticine, soak the soda for a period of time, you can make the surface of the plasticine soft, and after a few rubbing, you can return to the state when you first bought it.
3. Fresh-keeping bag.
First of all, apply hot water to the surface of the plasticine and rub it a few times, after several rubbing, the plasticine will evenly contain water, at this time take out the fresh-keeping bag, put the plasticine into it and seal it, after three or four days, take out the plasticine from the fresh-keeping bag and then take out the plasticine is a relatively soft state.
Precautions for playing with plasticine.
If the plasticine is left outside for too long, it will dry out, so it is best to store it in a sealed bag after playing with it to prevent moisture loss so that the plasticine will not dry out.
Wash your hands before and after using plasticine, especially light-colored plasticine, to prevent staining and dirty. Plasticine is sticky and can easily pick up bacteria, so wash your hands after playing.
How about making homemade plasticine?
Personally, I think buying a plasticine is much simpler than one. >>>More
The density is unchanged. Density is a property of matter, only related to the internal properties of the structure, just pinch, the density will not change, density = mass volume The mass changes, the density does not change, and the volume changes >>>More
Pneading plasticine, that's my trick. Plasticine not only exercises people's hands-on ability, but also exercises people's brain-moving ability, which is a good entertainment activity. I can make all kinds of animals and plants out of plasticine. >>>More
The resin clay is not light, heavy, and the light one is called ultra-light clay.