How should bees retrieved from the wild be tied to the spleen and passed through the box?

After harvesting wild bee colonies and bringing them back to their original nests, they must be fixed in time. Whatever the method used, it is necessary to secure the spleen of the nest without ensuring the integrity of the nest before placing it in the hive that needs to be used for the cage. And before that, it is necessary to remove the odor in the beehive, otherwise it will have a great impact on the bees.

If the nest spleen is destroyed or the nest spleen is not taken during the harvesting of the bee colony, then some can be taken out of another beehive and put it in.

The obtained spleen and a part of the honey spleen are cut according to the nest, and then fixed with ropes, and after they are arranged, the bees can be allowed to enter the box.

To choose a large area of bee cover, the bee spleen is repaired very neatly, and then the ovaries and powder spleen should be preserved.

Hello friends, how do the wild bees we receive outdoors pass them into our lattice boxes? Today's article explains it for you. In fact, the bee colony is passed through the compartment box, the same as the living light box, and the paper skin is prepared first, because the bee colony has a lover mood, so we say that we collect the bees outdoors.

Don't destroy this paper, you must leave it and take it home, we can tie it and pass it over. If we use a lattice box, we can use this kind of bamboo skewer, because the compartment box does not have a nest basket, so we have to use this bamboo skewer, put this skin into it, and hang it in the middle of the box.

First, the steps. Step 1: Novice friends should pay attention to one thing, do not bring honey in the box, if there is honey, the bee will not be peeled. So now we're going to put this bamboo skewer in it.

Many friends ask me what time the box is, and it is best that I usually choose when it is almost dark, that is, in the evening, because when it is almost dark, if you want to escape after the box, the bee will not be able to escape, and there is a stable time for the night. We put this skin in the middle of the beehive and threaded it with a bamboo skewer. In fact, we don't need a lot of skins in the box, we only need two or three sheets.

Step 2: Now let's open the bag of bees, don't shake it all at once, if you shake it down at once, the swarm will be frightened, and they will immediately fly into the air. We usually start by gently plucking two handfuls of bees with our hands and placing them on the nest skin.

The purpose of this is to first attract the bee to the skin, and then pour all the remaining bees on the nest skin, and then cover it with a piece of this snakeskin bag, and temporarily cover the lid of the box. Then we take the loose bees in this bee collection bag and shake them at the door, and the scattered bees will start immediately and gradually go in.

2. Precautions.

Another very important thing is that the temperature is higher than the countryside in this season, so don't use moisture-proof sheets. Now that we've passed the box, the bee is starting to emerge. How can you tell if it's stable?

It is to see if it is fanning, and the fan means that the bee is beginning to stabilize inside and is fanning the heat out. Let's not open it directly after we have passed the box, let it have a stable time for the night, and then at night, stuff it with a piece of toilet paper at the door and dip it in a little water. The next day it will bite open the door by itself, and the box will be stable.

1. Capture the bee colony: pay attention to ensure the safety of the queen bee when harvesting, and try to bring back the nest spleen of the bee colony. 2. Fixed nest spleen:

After the wild bee colony is harvested, the spleen of the nest must be fixed to the base of the nest immediately, and at the same time, the hive must be free of odor. 3. Timely delivery: Worker bees can enter and exit freely, but it is necessary to ensure that the queen bee cannot go out.

4. Bee colony management: bees begin to build new spleens, and after normal attendance, adjust the feeding according to the external nectar source conditions.

It is best to find the queen bee and catch her; If not, just put the bees in the new new box and block the exit to prevent the queen bee from escaping, and after a while, you'll be fine.

You should be using boxes and stuff like that, and first you clean the boxes so that they don't smell, and then you put the whole box in the box, and you tap it lightly, and they climb up.

Today I'm going to explain to you how to deal with the bees collected outdoors. Many friends have escaped after the bee colony collected from the outdoors has passed the box, just because they have not borrowed their spleen to pass the box. We tie the spleen too fragrantly, we must not tie the honey on it, like this honey, we have to cut it with a knife, and then prepare the good spleen.

Priority is given to this kind of large-area bee cover, and we can eliminate the kind of larval skin, because it is useless to tie that kind of skin. Why can't you tie the skin with honey? Because when you tie it up, the honey will be left everywhere, and the bees will not be skinned.

If you have a small skin, you can cut the two skins well and use them in a single basket, which will also save the basket.

Now let's talk about the most critical step of tying, many friends have done it wrong, that is, when using the tip of the knife to cut the wire, the force must not be too great, because the groove is divided into two sides, if you use too much force, cut it open, especially for novices, you must master the strength, and then, use the partition to flip it over. Today, we're going to teach you two fixed methods.

The first is that we use a wooden strip of ours, nailed on both sides with a horse nail gun, which is very convenient, and we have already tied one, and now we will tie the second one in the same way, cut it flat and aligned along the top of the groove frame, and then, with the tip of the knife, gently cut it, bury our wire into it, and then quickly flip the partition over. Then, prepare a wooden strip, it's still the same, nail it with a horse nail gun, you can also use a stapler without a horse nail gun, so if you tie it like this, you can disassemble it directly at the back. The second is to use this nylon cable tie, which is the same, first step on the top flat, then tie it well, and bury the wire.

Both methods are very effective, so that the paper we collect outdoors will not be wasted, and the bees will be more stable and will not escape.

Don't tie the honey up, cut it with a knife, and then prepare the good spleen.

Cut with a knife. Prepare the spleen. When selecting, choose a cover with a relatively large area, so that the larval skin can be eliminated.

In general, honey can be used, honey is the main food of bees, sweet and delicious, more attractive to bees.

Collect the bee colony and fix the nest spleen, so that the problem can be solved in time, and the box can be well carried out.

Generally, the recovered bees should find a queen bee, so that they can pass through the box well, and the slot door should be closed first, so that the bees can get used to it for a while.

Try to let the worker bees crawl out of the clean, no worker bees crawl out of the hole with a small amount of paper after crawling out, the purpose is to prevent the field bees from returning to the tree hole, and at the same time pay attention to the queen bee when collecting the worker bees, and gently catch the queen bee into the collection box when you see the queen bee.

After the bee colony is collected, close the nest door of the collection box, you can bring the bee colony home, and after returning home, you can transfer the bee colony to the normal beehive to raise, pay attention to the anti-escape piece at the nest door to prevent the bee colony from escaping;

At the same time, it is necessary to do a good job of feeding, when the colony begins to make a spleen and lay eggs, it means that the colony has basically stabilized, and then it will enter the normal management mode. If possible, the newly harvested bee colony can be supplemented with some capped spleens to facilitate the recovery of the bee colony, and for those who do not have a queen bee, it is necessary to intervene in time to the new queen or supplement the egg worm spleen for the transformation of worker bees.