Which company prints beer labels?

As a wine label, the standard can break through the traditional rigid quadrilateral design, and the more personalized irregular shape of the wine label makes it easier for the bottle of wine to stand out among many brands, so that consumers can quickly have cognition, generate consumption impulses, and achieve the effect of "labeling, eye-catching". A wider selection of faces: a wide variety of papers, films and special materials provide wineries and design houses with the most creative wine packaging ideas. Self-adhesive surfaces include transparent films, metallic effect films, smooth whitening materials, and traditional art papers with a variety of colors and textures.

Zhengzhou Kalepu label printing **** can be done, you can search for "Kalepu label printing company."", you can also check it in the post bar.

Beer labels are commonly made of transparent self-adhesive, aluminized paper, and the neck label is generally made of pure aluminum foil or tin foil, and the printing method is mostly UV printing, and there are also gravure printing, with high grade requirements, good printing effect requirements, and great difficulty in plate making.

There is printing in many places, depending on where you go, the Pearl River Delta technology is the most mature, the lowest. Generally, a set of ordinary aluminized paper labels is about 8 points, and the front and rear labels are added with neck labels. If you make that crystal clear, generally a set is about a dime.

At present, the main materials used to make liquor labels are as follows.

1) Aluminum foil has many alcoholic products, and aluminum foil is often used to print labels in order to make the label present a metallic effect. The more common aluminum foil at present is gold and silver.

2) Coated paper and mirror coated paper In addition to aluminum foil, many wine products also use coated paper or mirror coated paper (also known as high-gloss paper or glass cardboard) to make labels.

3}The chemical name of BOPP film PP material is polypropylene, which is generally used as PP material for label face material. In order to ensure the accuracy of overprinting in the printing process, most of them have to be biaxially stretched before leaving the factory, so they are mostly called BOPP.

It depends on what effect your label wants to achieve, fresh, bright, modern or classical, according to the desired effect is generally used aluminum foil, coated paper and writing paper. A deeper level of understanding, there are fully transparent BOPP face materials, special adhesives for labels, fully transparent PET liners and so on. If you want to print beer labels, but do not know much about the printing industry, professional printing manufacturers will provide you with sample reference, and will also provide you with advice and experience, and other materials and printing requirements are determined after the reasonable ** to you.

The problems that beer label pickpocketing and selling letters are easy to encounter in the spring queue of the factor, which is that the glue is unevenly brushed, and the label is dropped. Labels are pleated or dropped, which are common problems when printing beer labels.

It can be seen from the law that the paper is elongated by moisture and shrinks by drying, and the offset label is printed under the condition of "elongation" of paper with sheet resistance, while the gravure label is printed under the condition of "shrinkage" of paper. These are all things that need to be taken into account.

Hangzhou Datang Printing will answer for you: at present, most of China's beer labels use 65-80g m2 single-sided coated paper. Wet-strength paper, aluminum-sprayed paper, offset printing, gravure printing, label quality and fiber direction of label paper.

Flatness, moisture content. Dimensional stability, curling time and other factors.

The specific requirements are that the direction of the paper fiber is perpendicular to the axial direction of the bottle body; Water content is about 5% 7%; Under the condition of humidity of 40% to 80%, the single label remains flat; The curling height of the front and back sides is not more than 3mm; The time for the back side to curl into a cylindrical shape when exposed to water should be greater than 8 seconds. In addition to the above elements, the printing quality must meet the requirements of the wine label, otherwise it will bring difficulties to the label.

Quality problems that are prone to occur in beer labeling and the causes thereof.

1. Uneven brushing glue (there is glue on the upper and lower sides, no glue in the middle or glue in the middle and no glue on the left and right sides). The main reason is that the beer label paper is uneven, and the height of the forward and reverse curls is greater than 3mm.

2 Drop the sheet when the bid is taken. The main reason is that the curling height of the front of the beer label paper is greater than 3mm, and the air cannot enter between the labels during the labeling process, and there are double or multiple labels when the label is taken.

3 Label pleated or warped (good when attaching bottles, but the corners of the label are cocked during transfer). The main reason is that the moisture content of the label paper is low and it elongates quickly when exposed to water.

At present, the technical level of most printing plants can meet the appearance requirements of beer labels, and how to control the intrinsic quality of beer labels and meet the labeling needs is the focus of the process. From the above analysis, it can be seen that the main reason that causes the problem of beer label curl and warping angle is that the moisture content of beer label paper is low. If the printing method is different from the post-press processing method, it is also necessary to control the printing quality by controlling the moisture change of the beer label paper.

Changes in the moisture content of beer label paper in different printing methods.

1. Offset label is single, monochrome or multiple overprints to complete printing, ink drying is mostly natural conjunctiva curing, due to the existence of ink balance in offset printing, so the moisture content of label paper and printed matter is basically the same.

2 Gravure label is the web paper by pre-drying, continuous multi-color overprinting, winding completed, after each color printing ink by drying and solvent volatilization and drying, the label after many times of drying will cause water loss.

It can be seen from the law that the paper is elongated by moisture and shrinks by drying, that offset labels are printed under the condition of "elongation" of paper, while gravure labels are printed under the condition of "shrinkage" of paper. Therefore, if the process of gravure beer labeling is not well mastered, the finished product will be curled by humidity, resulting in labeling failure. How to solve the problem of water content change of gravure beer label to meet the requirements of bottle labeling?

You may want to pay attention. The following points:

Gravure beer label considerations.

1. Wet re-wetting: restore the moisture content of the label paper after printing;

2. Stereotyping: adjust the water replenishment in the process of rewetting according to different paper properties;

3. Flattening: The finished product of the single sheet after the web is cut should be flattened;

4. Maintain the air humidity in the production workshop.