What should I do if the Wi Fi on my phone cannot be enabled?

If your phone can't turn on the wifi switch, it is recommended that you:

1.Restart the device to see if it can be restored.

2.Check whether the phone has installed third-party network management software. If so, it is recommended to uninstall the deletion attempt.

Other. 1.Turn off the phone, restart the phone and turn Wi-Fi back on;

2.Remove the phone battery and turn it back on;

3.Factory reset and then turn on;

4.Carry out phone repairs, check for problems.

To put it bluntly, it doesn't cost money to watch news or movies online on your mobile phone. The WLAN on the mobile phone is the traffic that does not use the mobile phone card, but the traffic that takes the WLAN (the signal sent by the wireless router to surf the Internet).

For example, if you are using broadband at home and have a wireless route, if you use your mobile phone to connect to the WLAN signal sent by the wireless router, the traffic you use to watch movies on your mobile phone is your home broadband.

What should I do if my phone can't connect to wifi.

When we usually use our mobile phones to surf the Internet, we sometimes encounter the situation that our mobile phones cannot connect to wifi. Sometimes when I go downstairs and come back, my phone suddenly can't connect to wifi, so what should I do if my phone can't connect to wifi? Every time there is a network problem with the mobile phone, the most common means is to switch the "airplane mode", and then turn on and off the WLAN, and finally check the settings of the router when there is no way.

Step 1: First of all, you must make sure that the phone is within the effective range of the AP (hotspot) signal coverage. Normally, we can check whether the AP is within the valid range through our mobile phone.

Open the "Program List" of your phone, and click "Settings", "Wireless & Network", and "Wi-Fi Settings".

Step 2: In the Wi-Fi Settings window, select Turn on Wi-Fi and check whether there is a network you want to connect to in the Wi-Fi Network list. If not, the AP is not within the range of valid signals.

In this case, you need to be close to the AP point.

Need to be close to AP points.

Step 3: Check the AP node (usually a wireless router) settings to make sure that the DHCP server is turned on, i.e., it has the automatic IP address assignment function. Proceed to the router management interface (by typing " in the browser address bar

to log in), then find the "Settings" tab and click on it"DHCP" item, right-click on the "Enable" item to enable the DHCP server.

Enable the DHCP server.

Step 4: Make sure you have entered a normal connection password while making a wifi connection. Since most of the current WiFi uses encryption algorithms, you usually need to enter a password to connect normally.

Make sure that you have entered a working connection password.

The above is the solution to what to do if the mobile phone cannot connect to wifi, and it is recommended that you can change the password regularly, disconnect it again and then search for the password, that is, there is no problem with reconnecting and setting it up. If it's a problem with your router, check your router's manual to reset it. I have encountered this problem before, but after the reset, I can go online.

Your phone's Wi-Fi won't turn on, and there are usually several possibilities for this issue. One brother may have a problem with the software, including system settings, wireless function failures or updates; On the other hand, it may be a hardware failure, including a failure of the wireless chip or a problem with the system board. Of course, there may also be reasons such as poor network signal.

For software settings issues, we can try to turn the Wi-Fi function back on in the phone settings; Or try it after restarting your phone; You can also go to the System Upgrade Center to update the system; Check network settings, etc. If you still don't solve the problem after trying these methods, then we need to consider the cause of the hardware failure. For hardware problems, you need to seek professional mobile phone repairers to assist in repairing or replacing hardware components.

In addition, there are other factors that we can take into account when using WLAN. For example, signal strength issues, improper configuration of wireless routers or devices, and so on. You can try to resolve these issues by placing your device not far away from your Wi-Fi router, or as close to your router as possible, and setting the appropriate Wi-Fi parameters in your device.

In conclusion, understanding why Wi-Fi won't turn on and how to fix it is one of the keys to keeping your device up and running. It is necessary to analyze the specific problem and adopt different solutions according to different situations and situations. While ensuring the security of device data, we can also slowly improve our technical level, and we can solve problems more quickly and effectively when we encounter them in daily use.

What's going on with the WLAN switch on my phone won't turn on? 1. You can enter "Mobile Phone Settings - Wireless and Network - WLAN Settings", click the "Menu" button below the phone, select "Advanced" in the pop-up Mengyuan menu, and then select "Never" in the drop-down menu of "WLAN Sleep Policy", so as to realize that WLAN is always on and never sleeps. Choosing the right wifi hibernation strategy can help you get a better phone experience.

2. If the above method cannot turn on the wifi, it may be that the wifi module is broken, and it is recommended to repair and replace one. 3. You can also try to flash the phone first to eliminate the impact caused by the smart leakage system of the mobile phone, and then check whether it is a hardware failure. I hope it can help you.

How to activate Wi-Fi: You can send free SMS messages from tyWLAN to 10010 to apply for Wi-Fi activation.