How do you clean the hardware in the bathroom?

The bathroom tiles are inevitably full of dirt, and ordinary cleaning methods don't seem to work. Buying a little dilute hydrochloric acid back will solve this problem. When using, you can use a discarded eye medicine bottle at home to inhale a small amount of hydrochloric acid and drip it on the brick joint.

At this time, you will see many small bubbles coming out of the brick joints, and after a few seconds, gently brush the brick joints with a brush, and the dirt in the brick joints will be removed. Finally, rinse again with clean water to thoroughly remove stains and residual hydrochloric acid. If the toilet is not cleaned in time, it is easy to form macular stains and allow mold and bacteria to grow.

The correct step to clean the toilet bowl is to lift the seat cushion and spray the inside with toilet detergent, and after a few minutes, then thoroughly brush it with a toilet brush, both the toilet seat and the outer base. Soap and dirt are cleaned in bathroom bathtubs and wash basins, and soap is often used in bathroom bathtubs and wash basins, and nearby tiles are most likely to retain yellow soap stains. For the soap dirt on the tiles, you can first rinse it with warm water to dissolve the soap dirt partially, and then use a brush to gently wipe it off.

Alternatively, sulfuric acid or hydrochloric acid solutions can be used. Clean bathroom cabinets, if there are stains on the surface of the bathroom cabinets, avoid removing them with alcohol, gasoline or other chemical solvents. It is best to use a mild detergent, and never rub it vigorously when wiping it with a rag.

For wooden cabinets, after the water has evaporated, apply a little light wax to the original area, and then gently grind it several times to form a protective film. Bathroom hardware and ornaments are cleaned. Make it a habit to open doors and windows to keep the air in your bathroom clear.

The surface of the pendant should be wiped with a soft cotton cloth and water frequently to ensure the bright luster of the pendant, try not to clean it with detergent, and never use corrosive acid and alkali solution.

Under the "hard-hit area" of water vapor in the bathroom, the hardware is more prone to rust and mildew. Therefore, when cleaning at the end of the year, do not forget about the cleaning of these small parts. The hardware in the washing area is mainly stainless steel faucets, towel racks, bathroom cabinet hardware, mirror frames, etc.

Most of the faucets in the bathroom are made of stainless steel, and after a period of use, the gloss of the surface will be significantly reduced, and it will begin to appear hazy or hairy on the surface, which will seriously affect the appearance. The reason for this is that the scale in the bathroom adheres to the surface of the faucet, and when cleaning, you can squeeze a small amount of toothpaste onto the faucet, then gently scrub it with a toothbrush, rinse it with water, and use a dry cloth to polish it. Precautions for faucet cleaning and maintenance:

The surface of the stainless steel faucet cannot be scrubbed with a steel wool ball, because after the steel wool ball is wiped, it will leave irreparable scratches on the surface of the stainless steel faucet.

For stubborn dirt, surface dirt and stains that are difficult to remove, use a mild liquid detergent, colorless glass cleaning solution, or a polishing solution that does not have an abrasive effect, and then wash the faucet with clean water to remove all the cleaning agents, remove all the detergent, and dry it with a soft cotton cloth. Due to the long-term residual chrome surface of various detergents and shower gels used in daily use, the surface gloss of the faucet will deteriorate and directly affect the surface quality of the hardware. Please clean the surface of the hardware with a soft cloth at least once a week, preferably using a mild detergent such as Bilizo.

Rinse the faucet with clean water and wipe it dry with a soft cotton cloth, do not use any abrasive detergents, cloths or paper towels, and any acidic detergents, polishing abrasives or detergents or soaps to wipe the surface of the faucet.

The bathroom is a space that is frequently used in the home, and it is also a space that is easy to hide dirt and dirt. Since we use sanitary ware every day, and most of the sanitary ware is made of ceramic or metal, after long-term use, the surface is easy to accumulate dirt or become dull. So how to clean the bathroom sanitary ware?

Next, we will introduce it to you in detail!

1. How to clean the bathroom sanitary ware - bathroom faucet cleaning.

Metal sanitary ware such as faucets and showers are often dipped in various shower gels, shampoos, etc., making the chrome-plated faucets look dull. The cleaning products we use daily are alkaline, so choose a neutral detergent when cleaning the faucet, and then use a soft cotton without wiping, which can effectively clean up all kinds of traces on the surface. However, do not use a wire brush or acidic detergent to force cleaning, otherwise it will ruin the chrome plating on the surface of the faucet.

Second, how to clean the bathroom sanitary ware - toilet ceramic cleaning.

In addition to toilets, there are a variety of ceramic sanitary ware in the bathroom, such as bathroom cabinets, wash basins, bathtubs, etc., these white and bright ceramic sanitary ware, after a period of use, will inevitably become dull. White vinegar and lemon peel are good helpers for cleaning, scrub the dirt on the appearance of the sanitary ware, wipe it with a soft cloth dipped in a little white vinegar, or wipe it directly with lemon peel, and the appearance of the sanitary ware will be as bright as new.

3. How to clean the toilet sanitary ware - the toilet toilet is clean.

It's time to whiten your toilet. After regular use, the inner wall of the toilet will definitely produce all kinds of stains, and the yellow inner wall makes people feel disgusted and hairy, so hurry up and clean it. Put an appropriate amount of water in the toilet, clean it with a toilet brush, pour in 5-10 ml of detergent or hydrochloric acid solution, and then wipe it evenly with a brush, and rinse the detergent with clean water.

If the stain is more serious, it can be repeated to wash the ear row. Guesser.

Tools Ingredients: Towel (flexible cloth), cleaning cloth, toothpaste (or other neutral detergent) Properly wipe stains on bathroom surfaces with a cleansing cloth and toothpaste. Wipe the surface of the bathroom cabinet evenly with a fine damp towel.

Dry towels are dry, and you can't spray the cupboard with water. If there are scratches on the surface of the pot, you can apply some toothpaste to the scratches and wipe them repeatedly with a soft, dry cloth. If the spark is the focal mark left on the surface of the bathroom cabinet, wrap it in a patterned hard cloth to remove the toothpick, wipe the light trace, apply a thin layer of vinegar, and the focus mark will disappear.

To remove limescale from bathtubs, walls, faucets, soak a rag in vinegar, cover with stubborn dirt, and leave overnight. The next morning, knead the baking soda and vinegar into a dough and wipe it with a toothbrush dipped in the dough to make it clean. Wiping the tub with old newspaper can remove old dirt, or it can be cleaned or gently wiped with a brush dipped in detergent and rinsed with clean water.

If you don't mind the cost, use a special bath cleaner! Not only can it effectively remove the common soap and scale on the surface of the bathtub, but it also has a special effect on the organic aged yellow paper that is difficult to remove, saving time and energy, and there is no damage to the surface of the bathtub. If you can't wipe it with a clean cloth, you can wipe the water in the faucet first, then soak the dry rag in the water with white vinegar, wrap the rag in the faucet, and after an hour or so, you can remove the rag and wipe the faucet clean.

Dead corners that cannot be reached by the rag can be wiped with toothpaste. However, to prevent damage to the faucet surface, be careful not to "torture" the faucet with detergents that have an acidic or abrasive effect. The decontamination ingredients contained in toothpaste can effectively remove substances such as limescale.

Apply toothpaste to the faucet, wipe with a rag and rinse with water. When cleaning faucets, do not use acid and alkali cleaners or steel wool balls. Please do not damage the faucet plating.

The water contains trace amounts of carbonic acid, which form scale on the surface of the metal. When cleaning the faucet, pay attention not only to the stains on the surface of the faucet, but also to the cleanliness of the faucet outlet. The faucet outlet is also prone to clogging when watering, please remove the faucet foamer, soak it in vinegar for a while, and then wipe it clean.

The limescale on the faucet is only present in the faucet outlet filter, and the faucet outlet filter is unscrewed. Most of the limescale is accumulated, because there is a low filter, so it is enough to inject the detergent into the mouth filter and soak it overnight. Buy a pack of salt for one night and you're good to go.

Or take an appropriate amount of toothpaste with a clean rag and wipe the filter with water. Corners that cannot be reached by the rag can be wiped with a toothbrush dipped in toothpaste. However, to prevent damage to the surface, do not "torture" the filter with sexual detergents or abrasive detergents, wire brushes.

Only by removing dirt can bacteria multiply be completely avoided and a healthier drinking water environment can be achieved.

If you don't care about the cost, use a special bathroom cleaner! If you want to remove limescale from bathtubs, walls and faucets, you can soak a rag in vinegar and then cover it with stubborn dirt and let it stand overnight.

If there are scratches on the surface of the washbasin, you can apply a little toothpaste to the scratches and wipe them repeatedly with a soft dry cloth;

If there are scorch marks left by fireworks on the bathroom countertop, you can wrap a layer of fine-grained hard cloth on the toothpick, quietly wipe the marks, and then apply a thin layer of vinegar to make the scorch marks disappear.

White vinegar. Spraying white vinegar can eliminate limescale, and it is better to heat the white vinegar for better results.

You can go to the market and buy a cleaning cloth and wipe it slowly with dish soap.

1. Wash with clean water and wipe the pendant dry with a special maintenance cloth (or other 100% cotton cloth).

2. Use a wet rag coated with soap or toothpaste (special maintenance cloth or other 100% cotton cloth for pendants) to wipe gently, and then wash with water, do not use acidic or alkaline detergent to wipe the bathroom hardware, so as not to damage the metal surface.

3. Gently wipe with a mild liquid cleaner or colorless glass cleaner, and then wash with water.

4. The cycle is generally 3 months, and the wax oil with strong decontamination ability can be applied to a clean white cotton cloth to thoroughly clean the whole product, which can moderately extend the service life of the product.

Note: Please remember that after each cleaning, you must immediately remove all the detergent with clean water and wipe it dry with a special maintenance cloth (or other 100% cotton cloth) for the pendant, otherwise water stains and dirt may appear on the surface of the pendant.