What floor is the channel steel layer generally on?

Under normal circumstances, the channel steel layer of the building is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors.

Because the channel steel layer of the building is generally six floors, and the channel steel layer is counted six floors downward, but there are also buildings that are placed with five floors, so the specific number of channel steel floors of the building needs to be decided according to the total height of the building and the construction method. Moreover, the total height of the channel steel frame is generally not greater than 20 meters, and the channel steel layer of the building is located in the first depends on the construction method of the building, so the specific number of layers where the channel steel layer is located needs to be decided according to the actual construction situation of different buildings.

Channel steel layer means a floor that is paved with channel steel. Channel steel is divided into ordinary channel steel and light channel steel. The specification of hot-rolled ordinary channel steel is 5-40. The specifications of the hot-rolled switch-through channel steel agreed by the supply and demand parties are.

For the channel steel layer built by the commercial house, there is the same problem as the ordinary channel steel house, when people walk on it, there will be a certain shaking sound. The smaller the channel size, the louder the shaking sound. The larger the channel size, the smaller the shaking sound.

It will also have a certain impact on life, but the channel steel used in commercial buildings will also be the channel steel with large specifications and better quality, so the impact is not very large.

Note: Channel steel is divided into ordinary channel steel and light channel steel. The specification of hot-rolled ordinary channel steel is 5-40. The hot-rolled adaptable channel steel specification agreed by both the supply and demand sides is 6 5 30. Channel steel is mainly used in building structures.

In vehicle manufacturing, other industrial structures and fixed panels, channel steel is also often used with I-beams.

Used together. Noise is an important factor that affects the comfort of daily life, there are too many noise sources, it is normal to not eat well, and not be able to sleep. On the first floor, you need to worry about the noise caused by the owners of the unit doors, the buildings facing the street need to worry about the noise of traffic on the street, and the lower floors are also vulnerable to noise intrusion if there are no trees, sound insulation panels, etc.

Tier 6 or Tier 1.

11 layers of channel steel layer in the 6th or 1st floor, the channel steel layer of the building is generally six layers of one place, on the contrary down to count 6 layers is the channel steel layer, but there are also some buildings are five floors of one place, in fact, the channel steel layer of the specific building is set up the number of layers to be determined according to the total height of the building and the construction method.

The house channel steel layer refers to the floor paved with channel steel, and the channel steel is a long strip of steel with a grooved cross-section, which belongs to the carbon structural steel for construction and machinery, and belongs to the section steel with complex sections, and its cross-sectional shape is groove-shaped, and the channel steel layer generally exists in the façade of multi-storey buildings, and many people generally avoid the channel steel layer when buying a house.

The total height of 13 layers of channel steel layer is generally in the 7th layer, the total height of the channel steel frame does not exceed 20 meters, every 6 to 7 layers will be set up a channel steel layer, now the channel steel treatment of the extension of the channel steel layer of the house will be treated with anti-corrosion wrapping, and the quality of the house is not much affected. You can refer to it.

Question: Did you say that a 13-story building is usually on the seventh floor?

Question: Which floor is the best to buy for a 13-story building.

I asked if the deposit paid by my friend for the seventh floor was refunded.

How many layers is the 17-layer channel steel layer generally in? After reading it, it will be clear to you that if you want to buy a good house, you must avoid it.

Summary. The channel steel layer on the first floor is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors, because the channel steel layer of the building is generally 6 floors, and the channel steel layer is the channel steel layer that counts down to six floors, of course, there are buildings that are placed on 5 floors, so the specific number of channel steel floors of the building needs to be decided according to the total height of the building and the construction method. The total height of the channel steel crane is generally not greater than 20 meters.

If the number of floors of the building is 28 floors, the channel steel floor of the building is generally 6 or 9 floors.

What floor is the channel steel layer generally on?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

The channel steel layer on the first floor is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors, because the channel steel layer of the building is generally 6 floors, and the channel steel layer is the channel steel layer that counts down to six floors, of course, there are buildings that are placed on 5 floors, so the specific number of channel steel floors of the building needs to be decided according to the total height of the building and the construction method. The total height of the channel steel crane is generally not greater than 20 meters. If the number of floors of the building is 28 floors, the channel steel floor of the building is generally 6 or 9 floors.

After the house is built, the channel steel will also be pulled out, but it is said on the Internet that what is the matter with the shaking of the house, there will be a little shaking, and the large shaking of the channel steel will be small, and vice versa.

Channel steel layerIt is usually located on the 7th, 13th, 19th, etc.

Nowadays, the channel steel treatment of the extension of the channel steel layer of the house will carry out anti-corrosion and wrapping and other treatment measures, which does not have much impact on the quality of the house. The smaller the channel size, the louder the shaking sound. The larger the channel size, the smaller the shaking sound.

It will also have a certain impact on life, but the channel steel used in commercial construction has large specifications and good quality, and the impact is not very large.

Advantages and disadvantages of channel steel layers

Advantages: the channel steel is economical and suitable, the mechanical function is good, and the epitaxy of each point on the cross-section is relatively balanced and the internal stress is relatively balanced during the binding.

Small, lightweight, and metal-saving can reduce the construction structure by 30-40%.

Disadvantages: easy to leak, if the waterproofing of the wall is not done, the rainwater will leak into the room along the channel steel layer, and the shaking sound of the channel steel layer is relatively loud, which will affect the daily life of the owner. In addition, the channel steel layer is not corrosion-resistant, if it is in a humid environment for a long time, or is eroded by rain, the channel steel layer will have rust problems, which will affect the quality of the floor.

The channel steel layer is generally on the first floor, the seventh floor, the thirteenth floor, the nineteenth floor, the twenty-fifth floor, etc. Most of the time.

The sixth and seventh floors will be designed with a channel steel layer. There is no fixed standard for which layer the channel steel layer is, and the channel steel layer may be different in different buildings.

The channel steel layer is generally on the first floor, the seventh floor, the thirteenth floor, the nineteenth floor, the twenty-fifth floor, etc. Most of the time.

The sixth and seventh floors will be designed with a channel steel layer. In fact, at present, various wrapping measures are generally carried out at the channel steel where the channel steel layer of the house is extended. Therefore, the channel steel layer will not have any important impact on the quality of the house.

The channel steel layer of many commercial houses is generally on the first layer, and it may have a compartment of a channel steel layer. The channel steel layer is built by a lot of channel steel, and the channel steel is a long strip of steel with a grooved cross-section. Its specification representation method, such as 120 * 53 * 5, indicates a waist height of 120 mm, a leg width of 53 mm of channel steel, a waist thickness of 5 mm of channel steel, or 12 channel steel.

There is no fixed standard for which layer the channel steel layer is, and the channel steel layer may be different in different buildings. Therefore, buyers need to take the initiative to ask. When buying a house, you should try to avoid it, because the channel steel layer stores a large number of machinery and equipment, the noise is relatively large, and some equipment will also have radiation, and long-term living in the radiation area may have an impact on the human body.

Now the channel steel layer of the house will be very well handled. The anti-corrosion treatment and wrapping are quite tight, and there will be no previous corrosion problems. Deficiencies (self-built houses):

It is an attic made of channel steel, and when people walk on it, there will be a certain shaking sound. The smaller the channel size, the louder the shaking sound. The larger the channel size, the smaller the shaking sound. )

The 18-storey high-rise channel steel layer is generally on the 3rd, 9th, and 15th floors.

The channel steel layer of the 18-storey building is basically the first time for the 3-storey opening (the 3-8 floors are 6 floors, and the total height is not more than 20 meters, and the 4-8 floors are non-channel steel layers); 9 layers of excavation for the second time (9-14 layers are 6 floors, the total height is not more than 20 meters, 10-14 floors are non-channel steel layers); The 15th floor is overlifted for the third time (15-18 floors are 4 floors with a total height of not more than 20 meters, and 16-18 floors are non-channel steel layers), then 3 floors, 9 floors, and 15 floors are the so-called channel steel layers.

Precautions for buying a house

If you live with the elderly, you should consider the convenience of travel, and high-rise residents are most afraid of power outages. If there are elderly people in the family, it may be difficult to move an inch in the event of a power outage. Due to the inconvenience of legs and feet, the elderly are generally suitable for living on the ground floor and making it convenient for travel.

Some ground floor houses will have a small garden, which is also suitable for the elderly to raise plants for recreation.

If you are a young person who has just started working, you generally prefer a floor with a wide view, and you can choose a higher floor. The higher the floor above the ground, the better the air quality will be. Secondly, the high floors are not easily blocked by obstacles, the lighting is good and the ventilation is sufficient, the rooms are relatively bright and quiet, and people will be more relaxed.

The closer the floor is to the top floor, the more private it is, and it is suitable for young people who are looking for privacy.