If the split integrated stove is broken, can it be replaced separately?

Now there are a lot of kitchen equipment on the market, integrated stoves.

is one of them. So the question is, the stove is broken, do you need to replace it all. What needs to be paid attention to in the use of the comprehensive stove, I will give you a brief introduction.

If the manifold is broken, do you need to replace it all? Please do not replace them all. Most home care businesses are modular, so they can be used as long as the faulty parts are replaced.

The comprehensive stove of the big brand has a lifetime free replacement service, and the full service can be implemented during the warranty period, so you can contact the manufacturer to deal with it.

Popular precautions for use, accidentally spilling the soup in the pot during cooking. If it falls on the stove lid, it must be cleaned immediately with a rag or brush so that the stove complex can burn normally. This should be avoided as much as possible.

It is forbidden to use a barrier to block the flames, and no flammable substances can be placed around the cooktop, nor can they be used to dry clothes. Not only will it shorten the life of the stove, but it will also create a safety risk in the kitchen.

Before ignition, the ignition needle should be aimed at the ignition jar on the lid.

Prevent the ignition from being blocked by dirt.

It is forbidden to use inferior pots, and inferior casseroles once they are broken. This can cause a large amount of soup to spill and make the stove unfunctional. After the manifold is used up, the temperature of the panel is high, and it is forbidden to touch it with your hands.

Avoid wiping the panel with sharp objects. The gold ball will affect the beauty of the surface, and it is necessary to wipe it with a soft cloth with neutral detergent to ensure the beauty and hygiene of the appearance of the machine. LED lighting.

Independent circuit system, to put it bluntly, one day your integrated stove is not lit up. Not that cool, but has no effect at all on other features like cooking, cigarette smoke, etc.

The smoke hole part is easy to remove, the smoke pouch part of the stove at home. can be understood as a range hood) can also be easily removed, after removal does not affect the use of other functions, steaming can be carried out as usual. The gas double furnace had no effect.

Many users are worried that the gas stove is broken when they buy an integrated stove, and if it is broken, two people will break it together. But in fact, there is absolutely no effect between the two gas stoves with integrated stoves. If one cooktop breaks, another cooktop can be used to cook.

It can be replaced independently, after all, this is not a whole at all, and it is also possible to buy the same model.

It can be replaced separately because it can be taken off, find the relevant store, and buy the same model of electrical appliances.

In fact, it can be replaced separately, but you have to go to a place where you can buy an integrated stove.

With the continuous development of society, many urban integrated stoves are also particularly liked by many people, and the integrated stove is also a natural attribute of many functions into one. It has become the best choice for open kitchens, and many consumers also prefer integrated stoves, but once it breaks, the whole will break. There are also such complaints in the market, if one function of the integrated stove is broken, it will lead to other functions are also unusable.

And it's not very easy to repair, so it's said that the integrated stove is all bad. <>

Many people have heard that the integrated stove is a whole, and it is very difficult to repair after it is broken, and there are some entanglements when decorating. In fact, this is not the case, if the integrated stove chooses a separate modular hood, the gas stove and the steamer are not affected, and they can also be removed separately for maintenance. Now science and technology is very developed, I believe that the integrated stove will not become a whole, if a part is broken, the entire integrated stove is useless, then many people will definitely resist the use of integrated stove.

It does not affect each other, and many users are worried that it will break after buying the integrated stove, and sometimes one or two will break at the same time. The gas stove between the integrated stove will not be affected, if one stove is broken, the other stove can still continue to cook. Many parts can also be disassembled, protected, repaired and usually maintained, and you must buy the brand when buying an integrated stove.

In this way, there will be a guarantee, and if there is a problem, the after-sales service is also very powerful. <>

A lot of advantages have said so much, just want to tell you that the advantages of the integrated stove are many, and the decoration must be done in one step and choose the integrated stove. It is much better than the gas stove and gas smoke machine in the past. It is also very beautiful, and it also has a lot of suction power when cooking, so you won't worry about a lot of oil smoke in the kitchen, and it is also very convenient to clean it at ordinary times.

There are many integrated stoves with self-cleaning function, which is particularly convenient and will also improve the efficiency of cooking.

Definitely not need, the cost of replacing the whole set is too high, **if there is a problem, you can fix it**.

If your integrated stove is broken, then you need to confirm that he is broken, if it is on the stove, then you may only need to change the stove igniter, but if the integrated stove is broken inside, then you need to replace the whole together, because they are one, as long as there is a place broken, you need to disassemble it to repair it again, so the cost is too high, it is better to replace it with a new one.

If the integrated stove is broken, there is no need to replace the integrated stove in a whole set, you only need to find the damaged parts and replace the damaged parts. This can result in significant cost savings.

Like this split integrated stove, if it is replaced, it does not need to be replaced collectively, in fact, whether it is a split integrated stove or this overall integrated stove, it itself is made up of parts and componentsTherefore, there is no such thing as a broken condition that needs to be replaced as a whole. Because like the current integrated stove, its interior is basically connected by various components to form a modular management. <>

Then after a part is broken, you can replace and correct the part separately, if there is a problem with a part like this integrated stove, it needs to be replaced, then the maintenance cost is very high. Many consumers will not choose such an integrated stove, the cost of the integrated stove is relatively high, and the cost of installing a complete integrated stove may range from thousands of yuan to tens of thousands of yuan. <>

The parts in it can naturally be replaced separately, and this kind of parts can actually be replaced with the same type, but after the problem of such an integrated stove, the consumer himself has no way to complete the replacement of it independently, and can call the buyer of the integrated stove to let them solve this problem. After these professionals come, they will overhaul the integrated stove, and they will replace the part after they find that a part is in condition. <>

Although the integrated stove is a whole working mode, basically all the functions are also connected to an operating table, but it does not mean that if a component is broken, it needs to be replaced as a whole. Because when there is a problem in a certain part, it may only be a problem with the parts in this part, but the overall control center is still complete, so it is only necessary to replace the broken part, and there is no need to replace it as a whole.

It does not need to be replaced as a whole, if the split integrated stove is broken, what part can be replaced with what part, and there is no need to replace the whole part.

There is no need to replace the whole stove, because this kind of integrated stove is originally split, but it is necessary to replace the broken place.

It needs to be replaced as a whole. There is no need to replace small parts, because after changing small parts, they will often break, and it is better to replace them with a new one.

Summary. No hassle.

1. If the integrated stove wants to be modified into a component cooktop, we must first dismantle the integrated cooker.

Turn off the gas valve at home, remove the gas pipe joints, power plugs, smoke exhaust pipes and other parts at the integrated stove, and then slowly lift the integrated stove out of the cabinet.

2. After the integrated stove is removed, if a wall cabinet is installed above the integrated stove, we can ask the cabinet merchant to remove the wall cabinet.

And make up the base cabinet at the position of the integrated stove, replace the countertop of the original cabinet, and lay the gas stove installation hole on the countertop of the cabinet.

3. We will block the lower smoke exhaust hole of the integrated stove, and make a new smoke exhaust hole above the flue and reserve the check valve and flue.

4. We can ask an electrician to install a power socket near the installation location of the pumping unit, and let the merchant install the newly purchased range hood and gas cooktop.

Is it troublesome to change the integrated stove to a split stove?

No hassle. 1. If the integrated stove wants to be modified into a component cooktop, we must first dismantle the integrated cooker. Everyone turned off the gas valve at home, removed the gas pipe joints, power plugs, smoke exhaust pipes and other parts at the integrated stove, and then slowly lifted the integrated stove out of the cabinet.

2. After the integrated stove is removed, if a wall cabinet is installed above the integrated stove, we can ask the cabinet merchant to remove the wall cabinet. And make up the base cabinet at the position of the integrated stove, and then replace the countertop of the original cabinet cabinet, and lay the gas stove installation hole on the countertop of the cabinet. 3. We will block the lower smoke exhaust hole of the integrated stove, and make a new smoke exhaust hole above the flue and reserve the check valve and flue.

4. We can ask an electrician to install a power socket near the installation location of the pumping unit, and let the merchant install the newly purchased range hood and gas cooktop.

That's all there is to it, I hope it will help you, thank you.

1.During the cooking process, if the soup in the pot is accidentally spilled and falls on the stove lid, it should be cleaned immediately with a rag or brush to ensure that the integrated stove can burn normally. Of course, this situation should be avoided as much as possible.

It is strictly forbidden to shield the flame with a baffle, and flammable materials cannot be placed around the stove, let alone used to dry clothes, etc. Otherwise, it will not only shorten the service life of the cooktop, but also cause safety hazards to the kitchen. It is forbidden to use low-quality cooking utensils, such as low-quality casseroles, because once broken, a large amount of soup will overflow, resulting in the integrated stove not being able to function properly.

After the integrated stove is used up, the panel temperature is very high, and it is forbidden to touch it with your hands.

2.Also, avoid wiping the panel with sharp objects, such as gold balls, as this will affect the aesthetics of the surface. Instead, it should be wiped with a soft cloth dipped in neutral detergent, so as to ensure that the appearance of the machine is beautiful and hygienic.

The motor part of the integrated stove is a single module, which is easy to repair and disassemble in the event of a failure. Generally, there are two gas stoves, one is broken, and the other can continue to work. The steam oven or sterilizer below is also a stand-alone module.

Even if there is a problem with the steam oven and it needs to be repaired, it will not affect the normal use of the stove.

3.The modular design of the integrated stove, from the entire building to the independent operation of the individual components, can greatly increase its service life, so it is inevitable that problems will arise during long-term use and repairs will be required. It is undeniable that there will be a phenomenon of fake and real in any industry, and many informal manufacturers advertise under the banner of modularity, making it difficult for us to distinguish the authenticity.

If the appliance fails, it is either not covered by the warranty, or the after-sales service cannot be found directly.

4.In contrast, choosing a brand integrated stove will be more assured, ensure product quality, and provide excellent after-sales service. At present, most integrated stove brands on the market attach great importance to the after-sales service of products, such as often carrying out after-sales training and practical teaching, and going deep into consumers' homes to solve practical problems.

Installing a check valve at the flue mouth can prevent the flue gas from flowing back, but if you want to discharge the flue gas from your own flue, you still have to rely on a high-power range hood with high wind pressure, otherwise the flue gas will stay in your own flue, but the power is also large, which means that the louder the noise, the more expensive it is.

No, you don't. If the split integrated stove is broken, there is no need to replace it as a whole, and the broken place can be repaired, but the main valve must be turned off when repairing.

There is no need to replace the whole, some parts of the split integrated stove are broken, and they can be replaced directly, and the whole does not need to be replaced.

No, because the integrated stove is a separate design, there is no need to replace the whole thing, just replace the part that has been replaced.

The integrated stove does not need to be replaced by a single stove, you need:

If you want to replace the whole countertop, or you can accept the splicing countertop (add the countertop with an integrated stove width of about 900mm);

The position of the integrated stove is supplemented with the base cabinet;

plug the current lower exhaust hole of the integrated stove;

Dismantle a set of wall cabinets to install the smoke machine, and at the same time punch holes for the smoke machine;

Leave a power outlet for the smoke machine;

See if it's all big, don't change the single stove, change the integrated stove, buy the same size, directly in one step, you find no, the kitchen with the integrated stove, the smell of oil smoke is basically no, and the cleaning is easy to do, if you are not satisfied with the quality of the integrated stove product and service you are using now, find a big brand, you can do it.

We all know that the integrated stove contains a set of range hoods, gas stoves, disinfection cabinets, storage cabinets and other functions in one of the kitchen appliances (at that time I was also attracted by these functions), it is indeed very convenient to use, but it is really troublesome to clean, there are many functions, the kitchen is all oil smoke or something, and it has to be cleaned every three or five times. The exhaust method of the integrated stove is to suction the back and then exhaust the smoke pipe from the side to the flue, which is a little bad is that the smoke exhaust pipe passes through the cabinet, usually through the lower space of the cabinet.

But the kitchen is a place where delicious food and garbage are produced together, the biggest cleaning of the kitchen is the kitchen fume, if there is no good range hood, there will be oil stains on the body, the ground, the wall, the cabinet, etc. This grease stain is sticky, and at the same time, dirty kitchens tend to attract insects such as cockroaches. Integrated stove, also known as environmental protection stove or integrated environmental protection stove, integrated stove is a kitchen appliance that integrates various functions such as range hood, gas stove, disinfection cabinet, storage cabinet and so on.

Innovative design. The functions of range hood, gas stove, disinfection cabinet, storage cabinet, microcrystalline stove, induction cooker and other functions are perfectly integrated, with a unique combination and high-efficiency smoke absorption effect, to maximize the use efficiency of various functions, fully automated intelligent control, and truly realize the requirements of people's pursuit of green and environmentally friendly high-end kitchen appliances. With the continuous development of the integrated cooker industry and the continuous change of consumer demand, in order to adapt to the new demand of consumption, the integrated cooker is also constantly innovating, and the split integrated cooker came into being.

For most people, they have long been accustomed to the use of split stoves, and after choosing cabinets, they can be matched with gas stoves and hoods, and they can be replaced separately after a few years of use. Split products are independent combinations. However, the integrated stove certainly has its advantages, such as turning parts into wholes, but when it is replaced, it is a bit wasteful to replace the whole thing.

After understanding the types, I held the goal of buying a modular integrated stove to buy, ran several physical stores and looked at a lot of products on the Internet, and saw the process of high-end integrated stoves using seamless welding technology.