Apple 5S Telecom 4G card always shows 1x?

Apple mobile phone telecom 4G card always shows 1x. Explain that your current telecom phone signal is unstable. This means that there may be interference signals or other information restrictions in your current location.

If you can't use the 4G network, it should be that the location is not covered with a 4G signal.

In this case, you can only use 3G or 2G networks. It is not possible to use the 4G network.

Hello, iPhone 5S is a 3G mobile phone, Telecom 3G mobile phone is generally not compatible with Telecom 4G mobile phone card or the compatibility is not good, it is recommended that you change the Telecom version or full Netcom version of the 4G mobile phone. Or replace the latest 5G mobile phone terminal. Anhui Telecom online business hall for your service.

Hello,Apple 5S telecom card he always shows 4G,Or idle EX,It's all according to its system problems caused by the phenomenon,You turn off the phone again later,Restart,Log in,See if there is any effect?

If the teacher has such a situation, it means that Apple 5 is still this mobile phone, and there is a certain problem with its signal module, or it is caused by the mobile phone for too long. Some issues on the hardware.

If it is always displayed corresponding to some **, it may be because the network has a corresponding abnormality, because sometimes the network is in a state of maintenance, 9 he will also appear corresponding to some ** and some reasons why the network is not good in all aspects.

If it can be ruled out that it is a problem with the telecom card, it is that the 4G network cannot receive it due to the poor signal in your location.

In this case, it should be that the signal of the telecom mobile phone card is not very good, or the signal of the location is not good.

That's how it is, probably because of a problem with your phone.

Signal, the solution is as follows:

1. First open the settings icon of the Apple phone, as shown in the figure below.

2. Then find Cellular in Settings.

This is shown in the figure below.

3. Next, in the Cellular Network tab, click on Cellular Data.

options, as shown in the image below.

4. Then in the cellular network settings interface, click Voice & Data, as shown in the figure below.

5. Finally, in the Voice & Data option, change to 4G, and turn off the VoLTE option. In this way, it can solve the problem that Apple mobile phone Telecom 1X can not switch back to 4G.

Hello, this situation should be caused by the local telecom 3G and 4G network signal is not good, when the 3G, 4G network signal is not good, the telecom card will automatically fall back to the 1X network to ensure normal use. Anhui Telecom*** is at your service.

Turn on your iPhone6 at a loss, and reboot it in [Settings] - [General] to restore normal.

1. Unlock the iPhone6 phone, the operator signal in the upper left corner is very poor, open [Settings] from the main page.

2. After entering [Settings], select the [General] function and turn it on.

3. In the [General] menu, scroll down to the bottom and select the [Restore] function.

4. Go to [Restore] settings and select [Reset Network Settings].

5. Enter the six-digit scrambler code to successfully reset the network settings.

6. After resetting the network settings, press and hold the [Power Slow Empty Matching Button] on the side of the iPhone6 fuselage to slide to shut down and restart.

7. Restart the iphone6 phone, and you can find that the carrier condition in the upper left corner is back to normal.

Hello, if your Apple XR telecom card shows 1X, it may be because the telecom signal is not stable enough or the coverage is not enough, or it may be a problem with the mobile phone device. Here are some possible solutions to distract yourself:1

Re-insert the Telecom SIM card: Try to remove the Telecom SIM card and reinsert it into the phone to make sure the SIM card is not damaged or dirty. 2.

Restart your phone: Sometimes restarting your phone can fix the network connection issue, try restarting your phone and connecting to the network again. 4.

Update your phone's software: Make sure your phone is up to date, try updating to the latest version of the system to get a better network connection. 5.

Contact telecom customer service: If none of the above methods can solve the problem, it is recommended to contact telecom customer service for further help and solutions. It is important to note that in areas with weak telecommunication signals, 1x signals may be normal and do not necessarily need to be processed.

Hello, when your iPhone XR uses a telecom card, if the network signal is not good, there may be a 1X display. In this case, you can try the following methods to solve the problem:1

Confirm network coverage: First, you need to confirm if there is telecom coverage in your area. Try testing it elsewhere, if the internet signal is good elsewhere, it may be caused by a bad signal in your area.

2.Restart your phone: Try restarting your iPhone XR, which can sometimes fix network issues.

Press and hold the power button, slide the macro to turn off, and then press the power button to turn it on. 3.Change the telecom card more badly:

If none of the above methods can solve the problem, you can try to replace the telecom card. Sometimes there is a problem with the telecom card itself, and replacing it with a new telecom card may solve the problem. 4.

Contact your carrier: If none of the above methods can solve the problem, you can contact your carrier's customer service for help. They may perform further diagnostics and resolution on your phone and telecom card.

In a word, don't panic when your iPhone XR shows 1X display, you can try the above methods to solve it. If the problem persists, you can seek professional help.