How to open the lid of the Midea water dispenser?

Press the lid of the kettle firmly with your left hand, push the lever up with your right thumb holding the handle of the kettle, and open it with both hands at the same time.

Midea is a leading technology conglomerate in consumer appliances, HVAC, robotics and industrial automation systems, providing a wide range of products and services, Midea adheres to the principle of "creating value for customers" and is committed to creating a better life.

According to the latest data released by the authoritative statistical agency Zhongyikang in 2012, the market share of Midea's water dispenser exceeds 46%. From 2002 to 2012, it has achieved the first comprehensive market share for 10 consecutive years, leading the industry far ahead, and its products sell well in more than 40 countries and regions, with an export market share of 15%, and exports have increased year by year, ranking first in the market.

With excellent quality, beautiful appearance, humanized design and perfect after-sales service, Midea water dispenser has become the leading brand in the water dispenser industry and the first choice in the minds of many consumers.

1.Press and hold the lid of the kettle firmly with your left hand and turn it clockwise;

2.Hold the handle of the kettle with your right hand and push the lever up with your right thumb.

3.It can be opened with both hands at the same time.

Summary: The first time the right hand did not dare to exert force, but the lever had to be pushed hard to open. Both hands must be applied at the same time. Let's do it!

Take the kettle and tools to a well-lit place, roughly observe the kettle, and then use a fruit knife to operate along the gap of the kettle handle, and extend it with a hard plastic card after the gap is larger, so as to prevent too many scratches on the kettle handle due to knife engraving.

Take down the button, pay attention to observe, do not cause the connection to break, remove the button after the spring and other parts appear, remove the spring, the other parts can be installed in the original position, and then reinstall the kettle according to the reverse steps of disassembly.

Precautions for the use of electric kettles.

Choose the right outlet. The plug of an electric kettle usually has a grounding electrode and should be connected to a socket with a grounding socket. When in use, the power plug should be fully inserted into the outlet. Always keep the electric kettle's power plug, socket, power cord, and automatic switch device dry and clean.

Turn off the kettle switch before powering on. Check the switch of the electric kettle to make sure that the switch of the power supply is in the off position before powering on, so as not to damage the body and affect the service life of the impulse current.

Electric kettle lid repair steps:

1.Take the kettle and tools to a well-lit place and make a general observation of the kettle;

2.Then use a fruit knife to operate along the gap of the kettle handle, and extend it with a hard plastic card after the gap is larger, so as to prevent too many scratches on the kettle handle due to the knife engraving;

3.Take the button down, pay attention to observe, and do not cause the connection to break;

4.After removing the button, springs and other parts appear, remove the springs, and install other components in their original positions;

5.Then follow the reverse steps to reinstall the kettle.

One of my solutions to the fact that the lid of the water bottle can't be closed is to knock down the baffle at the handle (you can find it by looking closely at the handle) and then find that there is a spring bracket inside that fails, and the spring of the lid is still working, at this time, most of the spring brackets can not be repaired, so I simply damaged the spring of the lid, and let it cover it naturally, that is, when the lid is opened, it becomes manual! But it doesn't affect the use!

I'm the same, I've been using it for 5 years, and everything else is still very good, but now the lid can't be closed, so I can only use adhesive tape to ask for a way to repair it.

The electric kettle snapped because the lid of the electric kettle was not resistant to boiling water, and the structural part was broken in the environment of high heat damage for a long time. Hengsu new materials research and development, food grade hydrolysis resistant and boiling water resistant polycarbonate PC, model: PC HP2R can withstand boiling water and water vapor for a long time, and the mechanical properties are still in good condition.

Summary. Kiss! Hello. I'm the one who asks about the realm of life. We'd be happy to answer your questions.

Kiss! Hello. I'm the one who asks about the realm of life. We'd be happy to answer your questions.

This is sorting out the information for you, it takes a little time to type, please be patient, and we will reply to you as soon as possible within 5 minutes.

You're good to bury the group! How to disassemble the hot water kettle of Midea? This disassembly method is actually quite simple. Only one wide section of screws on the inside needs to be unscrewed. It's time to open it.

Hello. Is there anything else you need to consult? If not, please give me a thumbs up. You can also follow me. In the future, you are welcome to consult me at any time if you have any questions. I wish you all the best in your work and a happy life, thank you.

If the pressure lever of the Midea water dispenser kettle is broken, you can turn it on by following these steps:

1.Locate the handle on the top of the kettle and loosen the screws next to the handle (be careful not to make a mistake with the screws, otherwise you may damage the kettle).

2.Using a wrench or pliers, gently unscrew the plastic cover next to the handle.

3.Next, rotate the kettle clockwise from the bottom of the kettle and remove the kettle from the base. It can be loosened with some force.

4.Flip the kettle over and find the lever on the top of the kettle. But since the lever is broken, you'll need to replace it with some tools.

5.Using a small screwdriver or pliers, gently grip the tab that is now stuck on the top of the kettle and pull it until the lid is loosened.

6.Replace it with a new lever and reassemble the kettle and you're ready to go.

It is important to note that if you are unsure of your ability to operate it yourself, please do not attempt to disassemble the water dispenser yourself to avoid unnecessary damage. It's best to get a professional to repair it.

If the pressure rod of your Midea water dispenser kettle is broken and you need to open the kettle for replacement or repair, you can try the following methods:

1.Manual opening: At the bottom of the Midea water dispenser, you can find the fixing screw of the kettle pressure rod, use a screwdriver or wrench to unscrew the screws. Then, use the manual lever to open the kettle.

2.Use tools: If it is difficult to open manually, you can use other tools to assist. For example, use pliers or pliers to clamp the kettle lever, unscrew the set screws, and use a force cluster such as pulling the kettle apart.

3.Non-slip mat: Before turning on the kettle, you can place items such as a non-slip mat or towel at the bottom of the Midea water dispenser to avoid the kettle from slipping or breaking.

It is important to note that when opening the kettle, be cautious and avoid hazards such as burns or cracked kettles. If you are not familiar with opening the kettle, it is recommended that you contact after-sales service or professional maintenance personnel for replacement and repair landslide.

Water dispensers are an indispensable household item in modern life, and they are used very frequently. However, in long-term use, the kettle will often accumulate residual scale and bacteria, which will bring many hidden dangers to our health. Therefore, it is very necessary to open the lid of the water dispenser kettle to clean it frequently.

There are many types of water dispenser silver kettles, and the way to remove the lid will also be different. Here are a few ways to remove the lid from a regular water dispenser kettle:

1. Push-pull type to open the lid: This kind of kettle is very common, just press the front of the hand on both sides of the lid, and then push it back, the lid can naturally slide back, and then open it.

2. Rotate to open the lid: The lid of this kettle is generally on the top of the kettle, and you need to hold the bottom of the kettle with your hand and rotate the lid vigorously.

3. Buckle type to open the lid: The lid of this kettle is stuck with a button, and the lid needs to be uncovered by hand.

In short, no matter what type of water dispenser you use, you must open the lid and clean it regularly to avoid affecting our health.