How to release ice water from the water dispenser, which has a refrigeration function but don t know

If the water dispenser has a refrigeration function, then you can turn on the refrigeration switch. Generally, the cooling mechanism of drinking water is semiconductor refrigeration.

The effect is very limited, and the cooling capacity.

Comparatively smaller. The function switch of most water dispensers is located on the back of the water dispenser near the upper left or upper right corner. As shown in the figure below:

I also have a desktop water dispenser at home, which has the function of making ice water, and the water temperature of making milk, and the water temperature of making tea, which is very convenient, and the water that comes out of the function key of making ice water is ice water, and I also have a desktop water dispenser at home, which has the function of making ice water, and the water temperature of making milk, and the water temperature of making tea, which is very convenient, and the water that comes out of the function key of making ice water is ice water, and I also have a desktop water dispenser at home, which has the function of making ice water, There is also the temperature of the water for making milk, and the temperature of the water for making tea, which is very convenient

How do you put out cold water? There is a refrigeration function, but I don't know how to use it, this is so easy to use, the smart function is directly under the button of the smart function with the cup to come out of the cold water.

Most water dispensers can be cooled and heated, and there are separate switches behind the water dispensers, as long as the corresponding switches are turned on.

Some water dispensers do not have intelligent functions, if there are intelligent functions, you only need to turn on the switch on the back of the water dispenser, and the cold water can be released in the place where the cold water is placed.

Some water dispensers have the function of refrigeration, there is a special faucet for ice water, and you can receive cold water by asking the switch.

There are three out of the refrigeration function.

The inlet is generally an ice cube diagram.

Most of the standards are open, and the ice can be opened to get out.

water, but be sure to power it up and hit.

Turn on the refrigeration function.

I don't think I can use this for a long time, I feel like I'm going to be frozen through this water for a long time, so you can adjust the temperature and time of making water.

How does the water dispenser release ice water has a refrigeration function, but I don't know how to use this, you can read the manual, there is an instruction manual in each water dispenser.

The specific steps for dispensing cold water from the water dispenser are as follows:

1.Turn on the power: Plug in the power cord and turn on the power switch.

2.Turn on the refrigeration switch: It is generally located on the control panel, and it can be turned on.

3.Add water: Open the valve of the water supply pipe and add an appropriate amount of tap water.

4.Start cooling: After waiting for a while, press the water outlet switch and the cold water will come out.

There are a few things to keep in mind:

1.Before using the water dispenser for the first time, it is necessary to carry out the initial cleaning and clean the scale and other substances in the waterway system.

2.Be careful not to add too much or too little water, too much may cause the water in the tank to overflow, too little may cause the machine to not work properly.

3.Refrigeration takes time, generally needs to wait for about 10 minutes, if there is no water all the time, you can check whether the refrigeration switch is turned on.

4.Water dispensers need to be cleaned and disinfected every once in a while to ensure the hygiene and health of the water quality.

Here are a few things to keep in mind when buying a water dispenser:

1.Safety performance: First of all, you need to ensure the safety performance of the water dispenser, including the quality of the machine itself and the credibility of the manufacturer. It is recommended to choose a brand with relevant certifications and qualifications, such as national 3C certification, ISO quality certification, etc.

2.Capacity: Select the appropriate capacity based on your needs. Generally speaking, the capacity of household water dispensers is between 5L-10L, if it is used in an office or factory, you can choose a commercial water dispenser with a larger capacity.

3.Filter element type: The filter element is the core component of the water dispenser, which directly affects the quality of drinking water.

Common filter elements include PP cotton filter core, granular activated carbon filter element, RO reverse osmosis membrane filter element, etc., different filter elements correspond to different filtration effects, and you need to choose according to your own needs and water source conditions.

4.Design: Water dispensers are usually placed in public places such as homes or offices, so design is also a factor to consider. You can choose the right color and style according to your preference.

5.Maintenance: After purchasing a water dispenser, you also need to consider maintenance issues, such as filter replacement cycle, cleaning and maintenance, etc.

Choose a water dispenser that is easy to disassemble and clean for easy replacement and cleaning of the filter cartridge. At the same time, it is also necessary to consider the issue of after-sales service and maintenance, and choose a brand with good after-sales service.

In short, the purchase of a water dispenser needs to be comprehensively considered from many aspects such as safety performance, capacity, filter element type, appearance design, maintenance, etc., and choose a water dispenser that suits you in order to better meet your drinking water needs.

1. Turn on the power of the water dispenser and make sure that the water dispenser is installed with the correct cold water device;

2. Press the "Cold Drink" or "Cool Rent" button on the control panel of the water dispenser, and wait for a moment until the water dispenser reaches a constant temperature;

3. Turn on the faucet at the entrance of the water dispenser container, and wait for the colorless and odorless cold water to automatically flow into the water dispenser container, and at the same time experience the refreshing cold feeling;

4. Pay attention to turn off the water dispenser regularly, so as not to cause excessive energy consumption and damage the life of the water dispenser.

Summary. Hello, pro for a variety of reasons:

1. Whether the ball valve of the water storage tank is opened;

2. Whether the inlet water pressure is sufficient (the inlet water pressure of the general household water purifier is that it can be detected by a pressure gauge);

3. Whether the water pressure of the water storage tank is normal (whether there is air leakage, whether there is pressure leakage, etc.).

I don't have running water when I buy an ice machine, so how should I get water?

Hello, I have seen your question and am sorting out the answer, please wait a while

Hello, the water inlet of the pro-ice machine is controlled by the solenoid valve, and the water will not enter when the water is full. 1. Put the bottled water high, the water has a natural and tap water pressure (but pay attention to the water inlet valve is too slow, it is best to put the water high) 2, get a water pump that can absorb water, and power supply together with the water inlet valve, not only can absorb water but also envy the state of the pin to solve the problem that the water has no pressure.

Ice machine tap water, how to get water.

3. The water inlet of the water filter is directly connected to the water pipe for water injection. 4. Connect the drainage pipe of the machine to the ditch.

I have a water purifier, but I put a bottled water bar in the jar of square water, how not to absorb water.

Hello, there are many reasons: 1. Whether the ball valve of the water storage tank is opened; 2. Whether the water pressure of the inlet air is sufficient (the water pressure of the general household water purifier is that it can be detected by the pressure gauge cavity draft); 3. Whether the water pressure of the water storage tank is normal (whether there is air leakage, whether there is pressure leakage, etc.).

Thank you. If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation.

Finally, I wish you good health and a good mood!

There are refrigeration switches, which are generally push-button type, and there are also hidden on the back, a knob type.

In addition, if electronic refrigeration is used in the southern region, the effect is not good, because the cooling capacity of electronic refrigeration is limited. If it is a high-end water dispenser is compressed and refrigerated, it is easy to use, you can try it in ** to find, brentorma is very good, foreign design, it turned out to be a foreign trade product.

Refrigeration and heating function are corresponding, if the machine has a refrigeration function, it will definitely be set with a refrigeration switch, similar to a heating switch. As long as the refrigeration switch is turned on, the water dispenser will refrigerate.

There are two working principles of cold drinking mechanism:

1. The working principle of the semiconductor hot and cold water dispenser: when the semiconductor direct cooling hot and cold water dispenser is in use, the direct cooling hot and cold water dispenser provides room temperature water from the water tank, and the water inlet enters the cold tank container, and the cold water is refrigerated out.

After pressing the refrigeration switch, the AC voltage is step-down by the power transformer, the rectifier diode is used for full-wave rectification and capacitor filtering, and the DC voltage is output for the semiconductor cooling component refrigeration and fan exhaust.

2. The working principle of the compressor-type hot and cold water dispenser: The principle of the compressor refrigeration circuit of the compressor-type hot and cold water dispenser is basically the same as that of ordinary household refrigerators, but the refrigeration temperature is higher (5 15) and the compressor power is smaller.

In terms of refrigeration, the compressor compresses the refrigerant into high-temperature and high-pressure steam and sends it to the condenser, and through heat exchange, the refrigerant becomes a low-temperature and low-pressure liquid that passes through the filter and flows through the throttle capillary into the evaporator around the outside of the refrigeration tank, and the water temperature in the refrigeration tank drops after a large amount of heat absorption. The compressor stops working after reaching the set temperature of the temperature control switch; When the water temperature in the cold water tank rises to the set temperature of the thermostat, the compressor starts to work for refrigeration.

There is a special refrigeration device in the water dispenser, which mainly uses the principle of semiconductor refrigeration for refrigeration. In fact, a water dispenser generally has two water tanks, one for hot water and one for cold water. The refrigeration unit is placed in a cold water tank.

When the refrigeration switch is pressed, the refrigeration compressor in the water dispenser will start working. There is an evaporator in the fridge that absorbs all the heat. In this process, the compressor will send the gas to the condenser.

The condenser can quickly reduce the temperature of the liquid, and the heat of the water can be sucked away, thus keeping the temperature low. If the switch is always closed, the compressor and condenser will keep repeating the work as soon as the temperature rises to a certain temperature. In fact, the refrigeration device of the water dispenser is very similar to the refrigerator, but the compressor and condenser installed in the water dispenser are relatively small, so the amount of water that can be cooled at a time is also limited.

The water tank in the water dispenser is only about 500ml, so it takes about two or three minutes to complete the refrigeration process. However, only high-end water dispensers will be equipped with compressors, and if only ordinary water dispensers are used, semiconductor components will be used for refrigeration. Cheaper water dispensers will not be equipped with refrigeration, and the water at room temperature will be neither heated nor refrigerated.

In fact, the refrigeration effect of the water dispenser is not particularly good, and the temperature is generally around 5 degrees Celsius to 10 degrees Celsius, which is still far from the state of ice water. Therefore, if you want to drink cold water in summer, it is better to put it in the refrigerator with its practical ice cubes or directly put the water ice. Water dispensers equipped with refrigeration functions** are much higher than regular water dispensers.

If you just want to have an extra refrigeration function, it is not cost-effective to buy a high-end water dispenser.

Summary. Hello dear <>

I don't have running water when I buy an ice machine, so I should connect the water like this: the water inlet of the ice machine is controlled by a solenoid valve, and the water will not enter when the water is full. Put the bottled water high, the water has pressure and the nature of tap water is a property (but pay attention to the water inlet valve is too slow, it is best to put the water high) get a water pump that can absorb water, and power supply together with the water inlet valve, which can not only absorb water but also solve the problem that the water has no pressure.

I don't have running water when I buy an ice machine, so how should I get water?

Hello dear <>

I didn't buy the ice machine because I didn't think it would come to the water, and it should be connected like this: the water inlet of the ice machine in the state is controlled by the solenoid valve, and the water will not enter when the water is full. Put the bottled water high, the water has a pressure of natural and tap water a nature (the book is wide but pay attention to the water inlet valve is too slow, it is best to put the water high) to get a water pump that can absorb water, and the water inlet valve together with power supply, not only can absorb water but also solve the problem that the water has no pressure.

1First of all, you need to place the ice machine on a stable ground and connect it to the power supply. 2Then, place the prepared bottled water next to the ice machine, and make sure that the diameter of the bucket bucket is suitable for the water outlet of the ice machine. 3Next, insert the water outlet pipe of the ice machine into the bottled water, making sure that the depth of insertion is not lower than the water surface.

4Finally, turn on the ice machine and wait for a while to see the ice automatically generate and fall into the bottled water. Extension: When receiving the bottled water, you need to pay attention to the tightness of the barrel to ensure that the ice machine will not fail or operate normally due to water leakage in the air and land.

At the same time, in the process of using the ice machine, it also needs to be cleaned and maintained regularly to maintain its normal operation and prolong its service life. Have a great day, dear ones. I hope mine helps you

I don't have running water when I buy an ice machine, so how should I get water?

Dear, if the ice maker you bought doesn't have running water, you can consider the following methods of receiving water: <>

Smile with Xiang socks] 1.Connect purified water or cool boil: If your ice maker needs to add water manually, you can pour purified water or cool boil into the ice maker, then turn on the power and wait for the ice maker to work.

2.Use a filter: If your ice maker needs to be connected to running water, but you don't have running water, you may consider using a water filter.

A filter removes tastes and odors as well as particles and extends the life of the machine. 3.Pick up bottled water:

If your ice machine supports bottled water, you can buy bottled water and connect it to the ice machine. No matter which method of water connection you use, be sure to follow the instruction manual or user manual of the ice machine for proper water connection operation to ensure the normal operation of the ice machine. <>