How do I stop the IP conflict prompt?

Each machine in a LAN can only have a unique IP address, after we turn on the DHCP function of the router, the router will automatically assign an IP to each computer, mobile phone and tablet that joins the LAN.

If someone's mobile phone and computer manually set the IP, and it happens to be the same as the IP assigned by the router, there will be an IP address conflict.

The method of manually adding an IP address --- xp

Right-click on Neighbor and select Properties.

Right-click on the local connection and select Properties.

Double-click Internet Protocol.

Check the box to use the IP address below.

The router address cannot take the first or last digit (such as or, or and the router login address (mostly).

DNS can also be set in the next step.

You do not need to set DNS, if it is a public IP address, you need to set DNS.

Attach the setting method: win+r to open the running window >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Fill it in the above window (optionally, you can leave it blank).

I think the person who asked the question was a lazy person, and he didn't want to worry about the person who had a conflict with him, because the IP was used by himself first, so it wouldn't have any impact on him, but he didn't want him to show it

Then you have to change it in the management software, like P2P software, if there are two people in the LAN who use this software at the same time, there will be such a prompt. In addition, if you use IP+MAC binding, you can send IP conflicts to the host option when you find illegal IP-MAC binding.

Then let your IP not conflict with others.

Summary. Hello, dear, I'm glad to answer for you: IP address conflict, but IP is not conflicting; When an IP address conflict is detected, it usually means that two or more devices are using the same IP address.

One of the scenarios is when one device actively changes its IP address to the IP address of another device, resulting in both devices using the same IP address. Another situation is that in a certain network environment, there is a situation where there is a network port conflict, so that there are multiple devices on the network using the same IP address. To resolve IP address conflicts, you should first verify that the current IP address is correct, and if not, reset the IP address.

If the IP addresses of all devices are correct, you should check for port conflicts with other devices within your LAN. If there is a port conflict, you can rearrange the ports to prioritize the intermediate port number.

The message indicates that the IP addresses are conflicting, but the IP addresses are not conflicting.

Hello, dear, I'm glad to answer for you: IP address conflict, but IP is not conflicting; When an IP address conflict is detected, it usually means that two or more devices are using the same IP address. One of the scenarios is when one device actively changes its IP address to the IP address of another device, resulting in both devices using the same IP address.

Another situation is that in a certain network environment, there is a situation where there is a network port conflict, so that there are multiple devices on the network using the same IP address. To resolve IP address conflicts, you should first verify that the IP address in front of the bench is correct, and if not, reset the IP address. If the IP addresses of all devices are correct, you should check for port conflicts with other devices in your LAN.

If there is a port conflict, you can rearrange the ports to prioritize the intermediate port number.

And I've already shouted that the host of this IP has been changed to my previous IP, and I regret that my original IP was 72, and now I need to change it to 73 (the last digit). I've changed it to 73 on my side, and it works fine, and I changed it to 72 to show the conflict.

Dear,You change to 72 on the display of the conflict,Someone may be using this IP address,You try to use the keyboard's win+r and then enter cmd,Enter ping IP address in the module core command line interface,If the selling code regrets that the IP is 72 This address can communicate normally,It means that someone is using the address,If there is no communication,Then you can use it。

In the LAN, each computer has its own unique IP address, but the IP address of each computer can be modified, if the two computers are equipped with the same IP address, including the subnet mask, it will make the IP addresses of the two computers conflict, so today I brought it to youWin10 system

1.First, right-click on the computer and select Properties;

2.Then click on the Network and Sharing Center option in the Control Panel home page;

3.Next, change the adapter settings, right-click on the option network, and check the property option;

4.Then double-click to open Internet Protocol version 4;

5.Finally, we check Automatically get IP address, and then check Automatically get DNS server address, and then click OK.

If the stool is empty and you are using a cover vivo mobile phone, the mobile phone prompts an IP address conflict, which is due to the fact that the router does not correctly assign an IP address to the mobile phone, you can disconnect the wifi and reconnect it to use it again.

DNS line network card is not set, hit the network and share point on the left to change the adapter settings, right-click on the connection selection attributes, select IP4 settings, set the hand to set the slow roll project.

Fill in the first line with the win+r key to enter the cmd car, dos input ipconfig all the car column project setting value to copy.

DNS address and broadband operation model leather business (Tietong Telecom) city to hit the operator service electricity let tell the value of which is poor.