Boot other computer IP conflict 50

Set the IP of the router again, for example, you can change it to, and then set the IP of the computer to automatic. That's it.

You'll be prompted to enter your username and password. In general, the user name is generally admin, and the password is generally 1234 or admin. You try it, go in and take a look, it's all window intelligent, and it's easy to change.

If the IP of your router is then the IP of your four computers is set separately. , which is the same for the following four computers.

Mask: Gateway: Same as your router).

and your router) or you know the DNSIP

Netcom can't use the router, it will send detection data from the server every 3 minutes, if the same IP has a subtangle, it will automatically shut down the network channel of the handset.

Open the network neighbor right-click attribute - local connection right-click attribute -(icp ip) protocol -) -ip address (change the last column to 244 to try.)

If it doesn't work, use (shared Aegis) software!

The IP has two machines that are the same

Pure IP address conflict: If two or more computers use the same IP address on the same network, the IP address conflict will occur. When the computer detects a conflict of IP addresses, it will prompt another computer in this network with the same IP address as this computer.

In response to this situation, you can try the following methods to solve it:

Release IP address: In the Windows operating system, you can release the current IP address and obtain a new IP address through the CLI or the settings in the Network and Sharing Center.

Check network devices: Check network devices, such as routers, switches, etc., to ensure that they are working properly and configured correctly.

If the preceding methods do not solve the problem, we recommend that you contact your network administrator or professional technician for further troubleshooting.

In what case IP rush? 〉

If it is a wireless router, you can turn on DHCP on the router.

If it is a wired network, it may also be that the DHCP of the router is not turned on.

Open the corresponding NIC settings and look at the IP address that is currently set If it is obtained automatically, please note the current one.

IP subnet mask.

Gateway. dns

The general LAN or wireless network should be OK if you change the last xx to a number.

Then fill in the rest as they are.

How to solve the IP address conflict of the computer.