The set top box is the same as the kind that used to search for 58 units

How to install the Zhongjiu set-top box:

1. Assemble the antenna and install the high-frequency head: install and connect the antenna and the high-frequency head according to the manual.

2. Cable: Connect the cable on the set-top box with the cable on the TV.

Connect one end of the audio cable and the audio cable (red and white), cable (yellow) to the right channel, left channel, and ** (red, white, yellow) ports of the set-top box, and insert the other end into the audio input port of the TV using the same method.

3. Adjust the antenna elevation angle and azimuth angle

Elevation angle: If the scale on the antenna has been corrected, the queried angle is used;

Azimuth: due south to west.

The north is about south-west, and the elevation angle is degrees.

The south is about 75 degrees west, and the elevation angle is degrees.

4. Press the "Menu" button of the set-top box remote control to enter the next menu of system settings, find the program search, select automatic search, click OK, and wait for the search to complete to watch TV programs normally.

5. If it is a third-generation Zhongxing 9 machine, it also needs to be located to open the card before it can be used.

Set parameters: 1. Press the "Menu" button on the remote control to enter the "Main Menu" interface and select "System Settings";

2. Enter the password "9999";

3. Select "Installation and Signal Detection" in the "System Settings" interface (selected by default), and press the "Confirm" button of the remote control twice. Stand behind the satellite dish and let the front of the satellite dish slowly rotate from due south to the direction of the satellite (it is recommended to turn slower than the speed of the second hand of the watch). In the process of rotation, you should always keep an eye on the change of "signal strength" and "signal quality" in the debugging interface of the satellite receiver on the TV, and stop when the signal turns green, indicating that the satellite has been preliminarily identified and the satellite signal has been locked;

4. Network connection settings. IP settings: , port settings: 4567 or 04567;

5. The area code is set to the first six digits of the local ID number;

6. Turn off the power of the set-top box, insert the mobile ** card and smart card, and then turn it on;

7. Select "Base Station Information" in the system settings and press Confirm;

9. Wait for the base station information to pop up, and the scanned base station information appears on the TV, click the orange button "Store Confirmation";

11. Later, the information box will automatically pop up to prompt "Sent successfully", after exiting the menu, the upper right corner of the screen will prompt "During installation, please wait...."After 2-3 minutes, the screen will automatically pop up "Installation successful", if this message pops up, please wait patiently for about 10 minutes;

1.The first situation is that the signal of the cable TV station has been changed, and a staff member needs to come to the door to contact your card number with the cable TV, and the authorization can be activated, provided that the payment is made on time.

2.The second kind of situation is that you forget to pay, and you can watch cable TV immediately after paying the type code teasing fee, and you don't need to come to the door.

3.You can watch the programs of the six distribution channels through the set-top box without paying, but you can't watch the other channels.

1. Check whether the connection between the signal end and the set-top box, and between the set-top box and the TV is correct and smooth.

3. If you can't search the station, call the customer service of the cable TV set-top box provider** to inquire whether the signal is interrupted at present; Under normal circumstances, the set-top box needs to wait for the set-top box provider to perform remote authorization for the first time, otherwise the set-top box cannot be found.

4. Restart the set-top box to try the effect;

5. If the above methods still cannot be solved, it may be a set-top box failure; It is recommended to contact the set-top box provider for warranty or replacement.

1.The first situation is that the signal in front of or dismantled in front of your cable TV station has been changed, and a staff member needs to come to contact your card number with cable TV, and the authorization can be opened, provided that you pay on time?

2.The second situation is that you forget to pay for Tuanchang, and you can watch cable TV immediately after paying. There is no need for people to come to the door.

3.You can watch six channels of programs through the set-top box without paying, but you can't watch other channels.

If you have a network set-top box, you can watch thousands of TV stations, all CCTV, satellite TV, local stations across the country, Hong Kong, Macao and Taiwan, and TV stations at home and abroad!

If you have to search for the pot yourself, if you can have about 350 broadbands

You can watch as many as you buy, maybe more than 300 at most, 40 at the least.