How to restart the computer with a blue screen, how to restart the computer with a blue screen

The blue screen of computer boot is mainly caused by "memory error" or "abnormal shutdown"! Here's how to fix it:

1. Try to boot up, after the computer brand is out, tap F8 continuously, enter the safe mode, and use the cursor to select: the last correct configuration, Enter, Enter, press down!

2。Enter the safe mode, press enter, go to the desktop, use Kingsoft First Aid Kit to kill virus, Kingsoft First Aid Kit check: [Extended Scan] tick, scan immediately, deal with it immediately, and restart the computer!

3。Unplug the graphics card and memory sticks, erase them, use a brush again, clean the slots of dust and fans, replace the memory slots, and more!

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other!

6。If not, you need to "one-click restore" or "reinstall the system"!

7。If there is a problem with the hardware, send it for repair!

It is mostly related to incompatibility of memory modules or memory module corruption.

1. Memory module quality problems or memory slot quality problems, causing the system to constantly restart with a blue screen, open the chassis after power failure, do a single memory module test or replace a new memory module test, until the blue screen problem disappears.

2. Due to the excessive dust accumulation in the chassis, the motherboard is short-circuited due to the damp environment, open the chassis after power failure, and use a brush and leather drum to clean the dust in the chassis to return to normal.

3. For software reasons, such as being infected with Trojans and viruses, you can **360 Security Guard + 360 Antivirus Combination, press F8 when you boot up, select "Safe Mode" to boot to the desktop, and then manually start 360 Security Guard to clean up Trojans and viruses.

Summary. Hello dear<>

Dear <>

I'll answer your question for <>

The specific solutions are as follows:1First of all, when the computer is on the blue screen, in the blue screen page.

2.Find the power on and off button on your computer keyboard, and then press and hold the button for about five to six seconds. 3.

[than the heart] [than the heart] [than the heart] <>

Blue Screen How to Restart Your Computer.

Hello dear<>

Dear <>

I'll answer your question for <>

The specific solutions are as follows:1First of all, when the computer is on the blue screen, in the blue screen page.

2.Find the power on and off button on your computer keyboard, and then press and hold the button for about five to six seconds. 3.

[than the heart] [than the heart] [than the heart] <>

<> dear, if you force restart the computer frequently, it will cause some damage to the computer. <>

You can only press and hold the power on button until the laptop is powered off, and then turn it back on.

Generally speaking, there are four things that can cause the blue screen error.

1.Occurs after performing a Windows update.

2.Occurs after the hardware is installed.

3.Occurs after installing or updating software (including driver software applications).

4.Other factors (i.e., abnormalities not caused by the above).

First, the solution of the first three items is mainly to retrace to the previous normal situation.

If an exception occurs after a Windows update, the recent update will be removed.

If an exception occurs after installing the hardware, remove the hardware;

If there is an exception after installing or updating the software, remove or roll back the previous version of the software.

How to roll back the previous version of the driver via Device Manager.

1) Right-click (1) on [Start] and tap [Device Manager] (2).

2. Tap the triangle (3) next to the device type of [Display Adapter]. Right-click on [Intel(R) UHD Graphics 620] (4) and select [Properties] (5).

This step is based on the Intel graphics card driver as an example, please roll back the version according to the driver error you encounter.

3) Tap [Driver] (6) and tap [Rewind Driver] (7).

4) Select [Reason you want to roll back to a previously installed driver] (8) and tap [Yes] (9). The system will start rolling back the driver to the previous version.

2. If the blue screen error is caused by other factors, please refer to the following steps to eliminate it.

a.Front-end jobs.

Remove external devices, such as external hard drives, printers, memory cards, optical discs from optical drives, adapter cards from card readers, etc.

Update the BIOS to the latest version.

Perform a system update and driver update to the latest.

b.System Restore.

After the backup, perform a system restore.

Computer blue screen. Restart the computer: Press F8 to enter safe mode.

Cursor Select: The last correct configuration, then press all the way back and press down.

Safe mode, for operating systems such as WinODWS and macOS, safe mode is a special operation mode used for system debugging. When the system is in safe mode, users can easily fix some errors of the system. In safe mode, the system will be less functional, but many non-kernel programs in the system will not run, so it is suitable for debugging.

An installed operating system will only enter safe mode when there are major problems, such as hard disk problems, computer viruses.

and installing software that hinders the operation of the operating system. From time to time, the app also uses a safe mode to ensure stricter security measures.