When the floor is laid, you can step on it, and you can go up and step on it for a few days after la

Generally, you can step on it after two days.

Precautions: Remove the cement and other foreign objects attached to the brick surface during construction in time, and always keep the brick surface clean. When the product needs to be constructed after the paving, the dust stains on the surface of the product should be removed with a dry mop, and no sand, sewage and other substances that damage the surface should be left.

It is forbidden to polish the surface of the product and clean it with hydrofluoric acid and liquids containing hydrofluoric acid. If there are stains infiltrating in daily use, they should be cleaned with professional cleaning agents to prevent hard objects from damaging the surface of the tile, and do not carry out other operations and construction on the brick surface without a protective layer.

According to the specific problem type, the steps are disassembled, the cause is analyzed, the content is expanded, etc.

The specific steps are as follows: The main reason for this is ......

If it is laminate flooring and multi-layer flooring, after the installation is completed, it can be moved in and used, because the multi-layer flooring and conforming flooring of cash are nail-free products, and they can be used after the installation is completed.

Solid wood flooring should be placed for 2-3 days after installation, because solid wood flooring, whether it is a keel or a nailed floor, needs more than 48 hours to wait for the nail holding of the floor to be more stable.

Hope it helps.

Sanshan flooring is recommended to be installed for 12 hours, because the tongue and groove of the floor need to be stable and then step on it more tightly.

In order to ensure the quality stability of the floor after installation, it can only be walked after 12 hours of installation.

Floor tiles. It can be stepped on after 48 hours of laying; In general, cement mortar.

It will begin to solidify after 2 hours, and after 48 hours it will be possible to walk on it, but it will take days to dry completely; Do not step on it during the curing process until it stabilizes. Details are as follows:

Since the floor tiles will slowly solidify after 48 hours, there will be no solidification within 48 hours. Under normal circumstances, the cement begins to set after two hours, moderately after 24 hours, and can be properly stepped on after 48 hours, but no heavy objects can be placed on the floor tiles.

Floor tile. A week after laying.

In order to protect the surface of the floor tiles from foreign objects, the finished product needs to be protected. Floor tiles are not the last step in home decoration, and the next process is required. When the next process is carried out, it may be necessary to bring in the materials to pile up, and some construction waste during construction.

may have an impact on the floor tiles.

You can walk 48 hours after the tiles are applied.

You can't step on the tile right after you finish it. Under normal circumstances, cement mortar will begin to solidify after 2 days, and you can walk around on it after 48 hours, but it takes days to completely dry, so after 24 hours, you can cover sawdust at room temperature if possible, and water and cure for 48 hours, do not step on it during the curing period, until it is stable.

What are the ways to lay floor tiles?

1. Dry paving method: Theoretically speaking, the dry paving method should be used to water the base layer and remove floating sand and sundries. Wipe the bonding layer, use a one-to-three dry cement mortar, pave it according to the horizontal line, put the bricks on the mortar and vibrate it with a rubber hammer, remove the ground bricks and pour the cement slurry, and then put the ground bricks on the ground to vibrate and flat.

The dry paving method effectively avoids the occurrence of bubbles, hollowing and other phenomena caused by the ground brick in the paving process, but because the dry paving method of the ground tile is more labor-intensive, and the technical content is higher, the cost of the general dry paving method is much higher than that of the wet paving method.

2. Wet paving method: It is a ground tile paving method commonly used by many decoration owners, and the difference between this aspect of the process and the dry paving method is to replace the dry cement mortar with ordinary water and cement mortar. The tile floor using the wet paving method may produce hollow drums and bubbles, which affects the service life of the floor tiles, but because the wet paving method is easy to operate and the first is low, many families still use the wet paving method to pave the ground.

48 hours.

1. The tiles can only be stepped on after about 48 hours, and they cannot be stepped on within 48 hours. Because the floor tiles will slowly solidify after 48 hours, there is no way to achieve a curing phenomenon within 48 hours.

2. Under normal circumstances, the cement will begin to solidify at the primary level after two hours, start to solidify moderately after 24 hours, and step on it appropriately after 48 hours, but you can't put some heavy objects on it.

3. In fact, if the floor tiles really need to be dry, it will take four to five days, and be in a maintenance period within 48 hours, and try not to step on the tiles during the maintenance period, because it will directly affect the stability of the tiles.

When we buy tiles, we must pay attention to the density of the tile, if the density is relatively small, it is very likely to be broken in the later stage, want to know whether the density of the tile is large or small, you can use a drop of water to hand it on the tile, if it can be quickly absorbed, it means that the density of the tile is relatively small, if it can not be absorbed, it means that the density of the tile is relatively large. When buying ceramic tiles, try to buy some ceramic tiles from professional brand manufacturers to prevent color difference.

Floor tiles are basically the materials we commonly use, whether it is in large shopping malls, or in homes, including coffee shops and shops, floor tiles will be used to lay the floor, because the floor tiles are very easy to clean, and can also be used in a humid environment.

Floor tile paving generally uses cement mortar, and cement solidification has a certain time, the general initial setting time is 45 minutes, the final setting time is 10 hours, only after the final setting time, the cement mortar strength is initially completed.

If you have already mastered at this time, it may lead to the tile paving can not reach the initial expectation, so after the cement loses its plasticity, it is necessary to leave a certain amount of time for the cement mortar to achieve the best strength effect before it can be mastered, which is about a week.

The strength of cement mortar has reached the best effect, but it is not 100% strength, so frequent walking and accumulation of heavy objects may cause the floor tiles to appear hollow, warped or uneven, so after a week, you need to pay more attention to the action on the floor tiles to prevent problems.

The tiles that have just been paved can not be stepped on, because the floor tiles have just been paved, the cement mortar below has not been solidified, and it will be unsafe and easy to slip if stepped on it, and it may cause the smell of the tiles, causing the consequences of removing and re-paving, etc., it is best not to step on it within 24 hours after paving, and there is generally no way to step on it directly, you can lay cardboard on the floor tiles, which will be better to prevent the occurrence of problems.

Generally, you can step on it after two days.

Because the floor tiles have just been paved, the cement mortar below has not yet solidified, if you step on it directly, it is not safe at first, it may slip, and then it may cause the tiles to shift, causing the consequences of removing and re-paving, etc. It is recommended not to step on it within 24 hours after laying the tiles.

If there is no way, if you have to step on it directly, you can lay cardboard on top of the floor tiles, which will be better and prevent the problem from happening

Under normal circumstances, if the floor tiles have just been paved overnight, if the indoor air circulation is better in summer, and the temperature is relatively high, the cement mortar is easy to dry, so that the floor tiles dry quickly, and the floor tiles can be stepped on the next day after being paved overnight, but it is only possible to step on it, and it is absolutely impossible to put heavy objects on it.

If it is in winter or other seasons, when the indoor temperature is relatively low, the floor tiles have just been laid overnight, and it is not recommended to walk on them the next day.

No. 1.Because the floor tiles have just been paved, the cement mortar below has not yet solidified, if you step on it directly, it is not safe at first, it may slip, and then it may cause the tile to shift, causing the consequences of removing and re-paving.

It is recommended not to step on the bricks for 24 hours after laying them.

2.If there is no way, if you have to step on it directly, you can lay cardboard on top of the floor tiles, which will be better and prevent the problem from happening

After paving the floor tiles can not be stepped on directly, because the floor tiles have just been paved, without air flow, and the fixation of the underground materials of the floor tiles, it can not bear weight, only after a few days, the concrete is completely condensed, you can step on it directly, otherwise once you step on it, you will find that the floor is uneven, one side is high and one side is low, which affects the overall aesthetics, and there will be a certain gap, which is the connection between the floor tiles and the floor tiles is tight, and it is easy to loosen the situation.

The tiles that have just been paved can not be stepped on, because the floor tiles have just been paved, the cement mortar below has not been solidified, and it will be unsafe and easy to slip if stepped on it, and it may cause the smell of the tiles, causing the consequences of removing and re-paving, etc., it is best not to step on it within 24 hours after paving, and there is generally no way to step on it directly, you can lay cardboard on the floor tiles, which will be better to prevent the occurrence of problems.

Generally, after the floor is installed, it cannot be stepped on directly, because it has not yet solidified. So how long after the outdoor floor is laid, can I step on it? pchouse will take you to change Wangzhou to understand.

1. If the outdoor floor is laid with wood, you can walk normally after the paving*, but if you want to move heavier items, it is still equivalent to 48 hours later, which can make the stress in the floor more balanced.

2. If the outdoor tiles are laid, you can walk normally on the ground after 48 hours, but it takes 5 days for the cement sand core slurry under the tiles to be completely dry, so after 24 hours, you can cover the sawdust on the tiles and pour some water, so that you can walk after 48 hours of maintenance.

3. The initial setting time of cement under the ceramic tile is 45 minutes, the final setting time is 10 hours, and the cement will promote the plastic formation strength after 10 hours, but the strength of the cement mortar layer is only 30% within three days of just paving, and it will reach 90% in the next few days, and the remaining 10% will take several years.

4. Although you can walk around after laying the tiles for 48 hours, it is better not to step on it as much as possible, because frequent walking around in a week may cause hollow and uneven porcelain bricks.

<> should not be stepped on. Because the floor tiles have just been laid, the cement underneath is not yet solidified, there is no air flow, and it cannot bear the weight of silver. If you step on it, it will be very unsafe at first, it is very likely to slip, and it may cause the hollow drum of the tile displacement of the floor tile, the problem of unequal front travel, which will affect the overall aesthetics, and will also produce a certain gap, so that the connection between the floor tile grinding draft and the floor tile is not tight, and it is easy to loosen.

If it is serious, it will be dismantled and re-paved. So don't step on the floor tiles just after they've been laid. After waiting for a few days, the cement mortar has completely solidified, and then step on it directly.