When upgrading, there is 1 more hard disk, how to make full use of that hard disk

Updated on technology 2024-06-09
18 answers
  1. Anonymous users2024-02-11

    You can use an IDE interface as well! Unless you have two optical drives.

    Just do a good job of jumpers.

  2. Anonymous users2024-02-10

    Now there's a kind of connection box, put the hard drive in, follow its steps, you can turn the hard drive into a portable hard drive (that is, a big one), but it's not bad

    But if you have a portable hard drive, and you don't think the hard drive is too big to make a portable hard drive

    Then your extra hard drive can only be used to make a tea cup mat hehe

  3. Anonymous users2024-02-09

    Isn't it nice to have dual hard drives?

    If the extra is a laptop hard drive, it can also be used as a portable hard drive.

  4. Anonymous users2024-02-08

    Dual hard drives... Pretty good. But I don't know what interface you have.

    But no matter what excuse the hard drive can be used. 。But to jumper.

    It is to set up the master disk and the slave disk. The hard disk installed in the system is set as the main disk. There are prompts on the general hard disk.。。

    master is the main disk.

  5. Anonymous users2024-02-07

    Set up the master-slave hard disk in the BIOS.

  6. Anonymous users2024-02-06

    If you don't need it, you can sell it, if you want to use it as a mobile hard drive, you can also sell it, and then buy an inch second-hand mobile hard drive, which is much better!

  7. Anonymous users2024-02-05

    When moving the hard drive, although it is a bit large.

  8. Anonymous users2024-02-04

    Isn't it nice to have dual hard drives?

  9. Anonymous users2024-02-03

    57M should be the system disk,Generally speaking, the upgrade will not display the system disk,Your system disk is displayed again,And it can't be turned on,It may be a virus.,Check and kill it!

  10. Anonymous users2024-02-02

    Hello:This disk,Originally, it was a hidden partition,Generally used to save boot information and some drivers under win7。

  11. Anonymous users2024-02-01

    Upgrading is good, of course, but changing the drive will do little to speed up.

  12. Anonymous users2024-01-31

    Generally, more than 2 years are the problem of hard disks, it is good to change hard disks, find a mainstream Seagate, very fast.

    Also, what do you mean by not being as fast as you used to ......

  13. Anonymous users2024-01-30

    Smash EasyRecovery software and use it to delete him.

  14. Anonymous users2024-01-29

    It's the reason why the notebook comes with a card reader.,If you don't want it to be displayed.,You can directly right-click on my computer and select management-->> Disable it in the device manager and it's OK.。

  15. Anonymous users2024-01-28

    Don't know what disk management software you have installed, such as software to clean up junk and the like. Check it out, uninstall it, try it.

  16. Anonymous users2024-01-27

    Which drive letter is over.

  17. Anonymous users2024-01-26

    It is used to restore the system, and it cannot be deleted, and you will not have a one-click recovery function after deletion. If you don't move him, you can do it.

  18. Anonymous users2024-01-25

    This is your computer with a backup system or something.

    For example, ThinkPad's Blue Building.

    You don't have to pay attention to her. You can recover the system from that partition when needed.

Related questions
16 answers2024-06-09

Dizzy! With such a good thing, can you give me some luck? I thought.,But it's impossible.,If it's more than 72G on your computer display, there are two reasons: >>>More

8 answers2024-06-09

Use the disk display card, take a look at the following: give three kinds of card introductions, find more understanding on the Internet, there are a lot of introductions, there is no need to finish here, because there are many types of disk display cards, combine the following functions to see your needs. >>>More

6 answers2024-06-09

It is recommended to use partitionmagic to do it, generally if you want to continue to use this hard disk after the occurrence of bad sectors, you can shield it, and you can effectively control the increase of bad sectors after shielding. Because it shields that place from being used. So there is no need to continue to damage the hard drive and increase bad sectors. >>>More

17 answers2024-06-09

Depending on what you like, it's best to divide by function, which is also easier to manage.

25 answers2024-06-09

If you replace the used hard disk, you need to re-system, because the old system calls the old hardware, and the computer is replaced, and the original hardware cannot be found.