What are the disadvantages of a small apartment?

My suggestion is to pretend, it doesn't hurt. Think about it, every time you take a shower in the bathroom, you always have to mop the floor, sweep the water, and keep it dry so as not to affect the use of the toilet, almost ten minutes of bathing, and half an hour of mopping. The possible impact is heating, and the most suitable heating system on the market is AIA's dry and wet separation heating system.

Wind heating in dry areas, light heating in wet areas, and zonal heating.

Main disadvantages:

1. The requirements for the area of the toilet are relatively high for the separation of dry and wet;

2. The cost is higher than that of traditional bathroom design.

As long as it is not a particularly small small bathroom, it is recommended to do dry and wet separation, which can be used in the form of "two-type separation", that is, the shower bathtub and washbasin + toilet are divided into two areas, and the most common way is to use glass or shower curtain as a partition.

For small toilets, we need to pay attention to the following points when doing dry and wet separation:

1. Permeability of the partition.

The small bathroom is originally small, the two-type separation is already very cramped, want our bathroom to look more concise, can use glass partition to use glass partition, glass partition transparent will appear the whole bathroom more transparent.

2. Drainage capacity of the dry area.

Small bathrooms generally share a floor drain in the dry and wet areas, and there is no need for too many floor drains to affect the aesthetics, so we must consider the drainage problems in the dry area when installing the floor drain, such as: slope, water retaining strip, floor drain location, etc.

3. Moisture-proof problems in dry areas.

No matter what kind of bathroom needs to consider the waterproofing problem of the dry area, even more so for small toilets, the water vapor in the bath will permeate the entire space if it is not discharged in time, so the material of the bathroom cabinet in the dry area, the waterproofness of the socket, and the anti-slip of the ground need to be considered in advance.

We all know the importance and practicality of wet and dry partitions in the bathroom, such as keeping the bathroom dry, preventing moisture from damaging bathroom appliances and wooden bathroom cabinets, and staggering the areas where the family uses the bathroom. But now many houses in China are not very reasonable in the design of the house, often the living room is very large, the kitchen and bathroom area is pitifully small, 3 square meters of size is good. So how to do dry and wet partitioning in the bathroom of a small apartment?

Here are 15 real pictures of small bathroom decoration to teach you how to create a practical dry and wet partition design!

<> small apartment bathroom is generally only about 3 square meters, if you want to achieve indoor dry and wet separation, you must make reasonable use of the bathroom space and layout, but also consider the direction of the bathroom door opening. For this kind of small square bathroom, it is good to use a glass shower room partition of 1 4 arcs to make dry and wet partitions, with good results and safety. The downside is that it takes up a bit of bathroom space.

<> the bathing room with the sliding tempered glass door, it takes a long time, and in a humid environment, it is easy to cause the track to be unsmooth. Therefore, this casement bathroom design is very good for the dry and wet partitions of the bathroom in small apartments. And the shape of the straight line is more aesthetic with the bathroom cabinet.

The disadvantage is that the tightness is not as good as that of the track.

<> In addition to using tempered glass bath room for bathroom dry and wet partition partition design, shower curtain for small bathroom is the most economical and practical way. It occupies less space and can be disassembled at any time, which is inexpensive. When decorating, pay attention to the style of the shower curtain and the matching of the bathroom decoration style, which can have a better effect.

The design of the shower curtain can also be made into a semicircle, using the corner of the bathroom in a small apartment. Usually there are two large wrapped water pipes in the bathroom, which are placed in the shower area, which just has little impact, leaving the extra space for the toilet and bathroom cabinet. The disadvantage of the shower curtain is that it affects the line of sight, and it should be dried in time after taking a bath.

<> use tempered glass partitions to design dry and wet partitions in the bathroom, which has a stronger sense of transparency, and does a good job in waterproof design and storage design. If it is paired with a perfect lighting design, the effect is even more beautiful.

If you want the bathing area to be more comfortable, you can reduce the size of the wash basin appropriately. Some people do away with the toilet and install a squat toilet in the shower area, which is also a good way to design dry and wet partitions for small bathrooms. The premise is that you can accept squatting on the toilet.

When it comes to storage, of course, small bathrooms should pay more attention to this, but fortunately, there are now storage tools and components, like the bathroom design in the picture, does it look neat and tidy.

<> if the bathroom is small and there is room for space outside, the washing area is placed outside the bathroom, and the design of this dry and wet partition is the best to achieve true partition separation. Generally, you need a wall remodeling or custom bathroom cabinet, and both sides to the wall are the best.

Isn't it very beautiful and practical to have a master bedroom bathroom like this, which is also designed with dry and wet partitions? The above is a carefully selected 15 small bathroom dry and wet separation design, I hope to help you! What are your thoughts on the design of dry and wet partitions, welcome to leave a message.

Separate the washing area. Due to the high frequency of use of the washing area, the washing area can be separated from the toilet by changing the position of the partition wall, so that the congestion of the toilet can be reduced, and the dry and wet separation needs of the toilet can be realized.

Detach the shower area. In the case that the washing area cannot be separated separately, the shower area can be separated through the shower room to achieve the effect of dry and wet separation.

It should be noted here that the shower room is relatively square and occupies a certain position, which can be installed at the turn of the bathroom to save a certain amount of space.

I think you can put a slider on the wall and hang a shower curtain, which not only takes up less space, but also separates dry and wet.

The main thing is to make a rough distinction between the washbasin toilet and the shower area, and set the washbasin outside the bathroom, which not only does not add a bathroom, but also makes the space of the bathroom larger.

First of all, the space of the bathroom should be divided, and the shower area, laundry area and washing area should be isolated, so that dry and wet can be separated.

Nowadays, when decorating the bathroom, everyone likes to make dry and wet separation, but when making dry and wet separation, different spaces take on different use tasks, and the space needs to be relatively large. So is it necessary to make a dry and wet separation for a small bathroom? Let's take a look.

1. Improve the efficiency of life.

Small apartments have a higher demand for space utilization. Dry and wet separation in the bathroom can improve the living efficiency of the occupants. This is especially true for families with large populations.

For example, when you get up in the morning, you are rushing to work and going to school, and you are crowded together, so if you make a mode of dry and wet separation, the use of the toilet and brushing your teeth and washing your face can be carried out at the same time without interfering with each other. It greatly improves the efficiency of the use of the toilet.

2. Easy to clean up.

This independent dry zone design has its unique advantages, separating the dry zone from the wet zone to eliminate the front land, and only a small amount of moisture from the wet zone will enter the dry zone, which can keep the dry zone clean and tidy. The design of dry and wet separation is also strong in practicability, because the ground in the dry area is not moistened by water vapor for a long time, so the stubbornness of the dirt in the ground joints is also low, as long as it is cleaned with a light scrubbing, it is easy to do hygiene.

3. Strong security.

The bathroom is designed to separate dry and wet, which will greatly reduce the retention of water on the floor in the dry area, so that from the probability point of view, the accident of slipping and falling due to water accumulation on the floor will be reduced.

As the name suggests, the dry and wet separation toilet is a bathroom that separates the washbasin and bathroom, or the shower area from the toilet and basin area.

Disadvantages of wet and dry separation in the bathroom:

1. High cost.

Although the separation of dry and wet is good, it is not suitable for any house type. To be precise, it is generally only suitable for the current new house, and it is a relatively large house. Even if some old houses can be renovated, the project is more troublesome and the cost is quite high.

2. Large area.

Dry and wet separation for the area of the requirements are still very large, at least the bathroom plus the outside of the bathing table can have an area of 8 square meters, otherwise it is very crowded to do it, usually the washing station and the toilet are separated, there will be an extra wall or an extra layer of doors, not only that, we isolate the bathing station and the bathroom is basically a separate cost billing, plus some decorative components, so the cost will be relatively high.

3. Different habits.

Some people may like to wash their hands directly after going to the toilet, but now they have to open the door and go outside to wash their hands, more or less uncomfortable, and some people may not necessarily accept it, if you live with your elders, remind you to ask for the opinions of your elders.

The bathroom is the most common place used by every household, and it is also a place that every family can't live without. In order to create the effect of dry and wet separation, there are several ways to create a small apartment: the first method is to create a separate bathroom, the second method is to create a semi-open bathroom, and the third method is to create a solid wall bathroom.

According to different toilet usage and different preferences, you can choose the method that suits you.

1. The independent toilet can meet the needs of bathing and brushing teeth at the same time

A freestanding bathroom is a separate space. That is, make the bathroom a separate bathroom, and then install things like a sink outside of the bathroom. This method is often used by designers in home decoration design in modern home design, and now many families are using this decoration method.

Whether it is a small apartment or a large apartment, this method greatly facilitates everyone's needs for the separation of dry and wet in the bathroom. It not only satisfies the use of brushing and washing your face outside, but also makes it convenient for everyone to take a bath in the bathroom, both things can be done at the same time, and you don't have to worry about the space outside the shower area being wet. <>

2. Semi-open can be divided into areas for dry and wet separation with partitions

Semi-open toilets are also suitable for small apartments, because the space is limited, so in order to effectively save space, glass partitions or curtain partitions can be used to achieve the use of dry and wet separation. This saves space to a great extent. The space of the bathroom will also be brighter, and the bathroom can also meet different needs under the effect of partitions.

3. Solid wall decoration can also meet the separation of dry and wet, but the space will be smaller

The solid wall bathroom uses a wall to partition the toilet to achieve the effect of dry and wet separation. The result is a bathroom that is more private and soundproof. However, this method is not commonly used in small apartments, because it will bring a larger area of reduced space.

The simplest way to separate dry and wet in a small bathroom is to hang a shower curtain and install waterproof strips on the ground, but this method is not beautiful.

Design the shower room, you can also install a shower curtain, you can also do glass partitions, do these at the same time, but also remember to make a waterproof platform, to run away with waterproof, flow to the dry area, you can also install a bathtub, you can also install the sink outside the bathroom, this is a good way to do but partition.

In addition, to install a shower room, you can buy a small size, you can also install a shower curtain, or use glass as a partition; On the track of the shower curtain, it is possible to hang a shower curtain, and it is better to design a water retaining table, which can also be treated by using the toilet and shower area as a wet area.

Determine the location of the dry and wet separation area in the bathroom, and then carry out the construction; Put a glass partition in one corner of the bathroom, leave a proper position, be sure to fix it, and then set up a shower and bath bomb inside.

You can make a glass partition in the middle, so that you can separate dry and wet, and you can also put a cabinet in the middle, which can not only place items, but also make a partition, and save space.

In addition, you can buy a small size shower room, or you may be equipped with a shower curtain, or use glass to fulfill the partition; On the track of the shower curtain, you can hang the shower curtain and it is better to imagine a water retaining table, or you may use the toilet and shower area as a wet area to fulfill the disposal penalty.

For the current decoration, the house type is basically not particularly large, and the bathroom must also want to achieve dry and wet separation. The main purpose is also the popular design concept now, dry and wet separation refers to the separation of the sink and the bathroom. With the continuous progress of society, housing prices are very high, and small apartments are the first choice for most people to buy houses.

However, when decorating, it is still necessary to achieve pattern planning, especially the use rate of the bathroom is very high, and relatively speaking, if you want to do dry and wet separation, you must design it well, so that it will be more reasonable.

Wet and dry separation is very practical for the bathroom, and the bathroom will generally have bathing equipment. Usually after taking a shower, there will be a lot of water vapor in the bathroom, and the whole humid air will make the bathroom more dirty, so that the bathroom will breed small insects. Therefore, it is still necessary to make a dry and wet separation stool, in this case, it can be divided into two, and when taking a bath, you can ensure that there will be some dry places outside the bath, and bacteria will not grow because of moisture.

In fact, the best function of dry and wet separation is to save space, separate the shower and washing area, simply put, the bathroom and toilet can make a partition. It effectively prevents water vapor in the bath, which is also more beautiful and simple, and most importantly, saves money. Nowadays, many families will choose partition dry and wet separation when decorating the bathroom, which makes the design and the meter more unique and practical.

Dry and wet separation is a very common design scheme, and you should not think it is very simple when decorating the bathroom. As the saying goes, the kitchen and bathroom, the kitchen and bathroom are a place with a relatively high use force in life, and you can't be careless when decorating, many rooms have only one bathroom, and there are more members, and the separation of dry and wet will retain the space for washing. When others go to the toilet, they will also increase the frequency of toilet use, which will not affect others, and it is much more convenient when cleaning.