Why is it hot?

Updated on number 2024-06-23
4 answers
  1. Anonymous users2024-02-12

    Thanks to radiators.

    The surface temperature of the oil heater can be as high as 85 degrees Celsius.

    left and right, so it will be hot.

    Other precautions for the use of oleotin:

    1. When using the electric heating oil, it must be placed upright, because it is the heat conduction oil around it through the heating element at the lower end.

    Heat is used to transfer heat by making the heat transfer oil flow in the deflector pipe. If it is placed upside down, flat or obliquely, it will cause empty burning and burn out the heating tube.

    2. Electric oil heater cannot be used in the bathroom. Although the switch of the electric oil heater has a plastic cover that indicates that it is waterproof, it is only waterproof and not waterproof from vapor, which can be dangerous when used in the bathroom.

  2. Anonymous users2024-02-11

    Reasons why oil tins are hot on your hands:

    When the heating equipment is running to high power, the surface temperature is generally about 80 to 130 degrees, which will naturally be hot.

    The temperature of the oil tin can be set, and the user can adjust the temperature to the appropriate range.

    Oil tins are also called oil-filled heaters. The appearance is similar to the radiator, but in fact, its working principle is completely different, the oil heater is heated by baking, mainly by heating the blades to increase the indoor temperature. There are 7, 9, 10, 12 and other types of heat sinks, and most of the power used is between 1500 watts and 2000 watts.

  3. Anonymous users2024-02-10

    Saiyi Electric Your Questions:

    When the oil tin is running to high power, the surface temperature is generally about 80 to 130 degrees, because the oil tin itself is also heating by itself, and then affects the whole room, the temperature is too low The effect is not very obvious, but the temperature is still a relatively safe temperature compared to other heaters.

  4. Anonymous users2024-02-09

    Hello Kiss is happy to answer this question for you. <>

    Why is the oil tin hot: Please check whether the gear and thermostat are turned on to the maximum, generally the oil tin electric heater has three gears (low, medium and high), and there is also a thermostat, please turn the gear to the maximum, and the thermostat is adjusted to the highest temperature. If the inspection is fine, it may be that the heater inside the senior is damaged, and it is best to ask the manufacturer to repair it.

    The sound of running water is normal, and the oil-type electric heater is filled with transformer oil, which conducts the heat of the heater to the outer surface of the electric heater and then dissipates it to the space. Shaking the electric heater is equivalent to mixing the transformer oil and the temperature is more uniform.

Related questions
24 answers2024-06-23

The oil heater will be replaced with the oil heat transfer oil in about three years. It is convenient for the living room, the bedroom is warmed, and the cost of the home is low.

3 answers2024-06-23

Not particular. Be careful next time.

5 answers2024-06-23

Both have their advantages;

Differences: Oil tin is suitable for long-term use, long life, good effect, but slow preheating speed; The electric heater preheats up quickly, but it is not good if it is high, and the life is short, it is easy to dry, and the comfort is poor. >>>More

13 answers2024-06-23

The new iPhone 11 series uses a more powerful A13 processor, but the process technology is still maintained at the 7nm level, so the heat is more obvious than the previous generation A12 processor. Coupled with the dual-layer motherboard design and tight component stacking, the iPhone 11 series is far behind other single-layer motherboard phones in terms of heat dissipation capacity. >>>More

17 answers2024-06-23

Scalded ** one:

Rinse the wound with cool water first, and then soak the wound in cold water for half an hour. Generally speaking, the earlier the soaking time, the lower the water temperature (not lower than 5 to avoid frostbite), the better the effect. However, if the wound has been blistered and broken, it should not be soaked to prevent infection. >>>More