If I want to move the toilet in the bathroom, will changing the drain lead to unobstructed flushing

It will be unsmooth, because the farther the toilet is shifted, the less smooth the drainage, and it is likely to cause the pipe to clog, so it is best not to shift.

It is likely that the flushing will not be smooth, because the toilets in the mobile building are probably in the same place, and if they are changed, they will be crooked.

For bathroom decoration, it is very common to change the position of the toilet. So, for those who want to translate the toilet in the bathroom, the renovated drain will not affect the later use, and the flush is not smooth.

Summary. If the toilet is displaced during the decoration, if it is installed properly, it will generally not cause the toilet sewer to become easy to clog after it becomes long::

Because the toilet sewer pipe is allowed to install horizontal pipes, look at some public toilets, a row of horizontal sewage pipes that are about 10 meters long, or even longer, are not the same as not blocked.

It can be seen that the toilet is properly displaced in the family and will not be clogged. However, when installing horizontal pipes, there needs to be a certain slope, as long as there is a slope, the sewage can flow to a lower place.

In addition, most of the pipes are now PVC pipes, and its inner wall is also very smooth, and the dirt generally flows away with the water. It won't be blocked.

Will the displacement of the toilet during the renovation cause the toilet drain to become longer and easy to block.

In the decoration of the bathroom displacement, if Fengmin is installed properly, it will generally not cause the toilet sewer to become longer and easy to block the plug: because the toilet sewer pipe is allowed to install horizontal pipes, look at some public toilets, a row of about 10 meters long, or even longer horizontal sewage pipes, is not the same is not blocked. It can be seen that the toilet is properly displaced in the family and will not be clogged.

However, when installing horizontal pipes, there needs to be a certain slope, as long as there is a slope, the sewage can flow to a lower place. In addition, most of the pipes are now PVC pipes, and its inner wall is also very smooth, and the dirt generally flows away with the water. It won't be blocked.

Chi Ji Lao. Thank you <>

OK. There are 2 ways to change the toilet drainage: x0d x0a1, negotiate with the owner downstairs to change the original plumbing directly from downstairs.

This method is the least likely to cause clogging, provided that your landlord agrees, of course. x0d x0a2 to raise the floor of the bathroom. The elevation of the floor is directly proportional to the drain in your toilet.

If your room height is enough, you can choose this method, but this method may cause sewer blockage in the later stage, so you need to be cautious. If you just want to make a toilet, you can choose a toilet shifter, but the farthest limit of the shifter is 15cm, which is more limited and more likely to be blocked. x0d x0a another in the room of the sewer renovation property is not dripping.

Hello dear! Glad for your question! How to deal with the unobstructed drainage of the flush toilet? :

In general, there are three solutions:1A common method is to unclog the toilet bowl by water pressure; 2.

Unclog the toilet bowl with a leather picker; 3.Use professional tools to unclog the toilet. When encountering this situation, the most effective thing is to find a reliable housekeeping company to solve it, and it is difficult to operate it by one's own ability.

First of all, toilet blockage is a problem that will occur in many houses, under normal circumstances, professionals will use one end of a long water pipe to put on the faucet, the other end is plugged into the toilet mouth, and then use the discarded cloth at home to block the toilet mouth and open the faucet, so that the toilet blockage problem can be easily solved by water pressure.

The toilet drain is not unobstructed and the treatment method is as follows:

1. Many times the toilet flushes more and flushes it by itself, especially if it is a soluble or breakable item such as soil and paper. If it's greasy, then rinse a basin of boiling water to melt it.

Or buy some caustic soda, boil water to melt the caustic soda, pour it into the toilet, and it will be clear in ten minutes. Or use an appropriate amount of oxalic acid to dredge (usually you can also use oxalic acid to clean the toilet, just neutralize with urine alkali to make the toilet unblocked).

2. Use a hook made of wire to stretch into the sewer mouth and stir to make the dirt wrap around the wire, and then pull out the wire to drag the dirt out of the sewer mouth. Or find a half-inch-wide bamboo stick to reach into the toilet bowl to unclog it.

3. Fill half of the toilet bowl with water, use a round mop or a round-headed soft brush, and aim it at the hole in the sewer and pound it vigorously. You can also use the old-fashioned mop and press the hole a few times with the mop after half of the water, moving quickly and relying on pressure to get it through. Or go to the market to buy a puff, and then slam it a few times, use it once every half a month, and it won't be blocked.

4. Use the beverage bottle to dredge, cut off the bottom of the mouth of the large cola bottle after drinking, put it upside down in the toilet, and hold the bottom with your hand and pump it up a few times.

If the toilet paper falls into the toilet, there will be a slight toilet drainage, at this time, you only need to dredge the foreign objects that fell into the toilet; Falling hard objects into the toilet bowl can cause serious blockages, and it is necessary to remove the hard foreign objects from the toilet bowl before entering the water.

Toilet installation mistakes and squatting pit to change the toilet will cause the toilet to drain poorly, and the toilet drain in these two cases needs to be inspected and repaired by professionals.

Toilet displacement has nothing to do with the way the toilet is flushed.

If you only consider the problem of clogging, it is recommended to choose the straight flush type, which has a large diameter and a slightly louder noise.

If you only consider the problem of blockage, it is recommended to choose the direct flush type, the diameter of the straight flush is large, the noise is slightly larger, and the straight flush cannot be said to be outdated, 90mm, the siphon 75mm toilet is deodorized through the water trap, then it is very likely that the pipe ventilation pipe is blocked, and the general toilet has a peculiar smell, so there is a peculiar smell, if it is not for the toilet is not installed, the water in the trap is sucked away.

From a hygienic and economic point of view, I recommend that you opt for flushing siphon toilets.

If it's a toilet shift, I don't know if you're talking about a toilet shift. It's best to have a look at the plumber on site before making a decision, rather than just switching to a straight rush. If you can discuss it with the downstairs, you can change the location of the sewer pipe downstairs, which is the most ideal method; There is also a way to open a trough, change the toilet sewer pipe to 75 pipes and bury them on the floor and then lay floor tiles, the disadvantage is that if you use it badly, there will be a situation of clogging the toilet from a sanitary and economic point of view, I recommend that you choose to flush down the siphon toilet.

If you are only concerned about the problem of blockage, it is recommended to choose the straight flush type, which has a large diameter of 90 mm and a siphon of 75 mm

If it is not that the toilet is not installed, then it is very likely that the pipe ventilation pipe is blocked, and the water from the trap is sucked away, so there is a peculiar smell, and the toilet is flushed or siphoned, which has little to do with it.

Compared with the siphon, the noise is slightly louder, and the straight flush cannot be said to be outdated, and Europe is basically a straight flush toilet.

I don't know if you're talking about a toilet shift, but if it's a toilet shift, it's not just a direct flush method. If you can discuss it with the downstairs, you can change the location of the sewer pipe downstairs, which is the most ideal method; Another is to open a trough, change the toilet drain pipe to 75 pipes and bury them on the floor and then lay floor tiles, the disadvantage is that if you use it badly, there will be a clogging of the toilet. It is better to find a plumber to see the site before making a decision.

It's all available. The family recently bought one, and it works very well and is very cheap. Before going to the toilet, spray a layer of foam evenly at the entrance of the toilet at a distance of about 10 20 cm to cover the water in the toilet.

Then go to the toilet, you can clearly feel that there is no odor, and it can also prevent splashing water when going to the toilet, which is very easy to use and very safe.

From a hygienic and economic point of view, I recommend that you opt for flushing siphon toilets.

If the drain under the toilet is uneven, it may be due to an uneven wall or floor. This can result in the toilet not being in the correct position, draining poorly, or producing a screeching sound. In this case, here are some workarounds:

1.The first thing you need to do is measure the height of the drain. If it is low, we can use a lifter to raise the toilet.

A lifter can be a special device for a toilet bowl or a simple tool such as stacking wooden boards. Once the lifter is installed, measure the height of the drain again until it is flush with the toilet.

2.If the drain is high, we need to dig a part of the ground or under the wall and install some appropriate supports to reduce the height of the drain. This may require the removal of floors or walls, so it is not suitable for some rented housing.

This solution requires expertise and time, so it's best to contact a professional plumber or worker to complete it.

3.If the drain is only slightly uneven, consider using a thin pad or packing to adjust. Before installing the toilet, the filling should be placed on the drain and the gaskets should be distributed as evenly as possible during installation.

The above is the solution to the uneven drain under the toilet. Either way, we should choose a professional worker to handle it to ensure a stable installation of the toilet bowl and ensure the smooth and safe drainage of the home.

The drain under the toilet bowl is uneven, and you can level it with some cement mortar. You can also smooth it out with glass glue, as long as it doesn't leak.