What causes double eyelid surgery failure?

The failure of double eyelid surgery may be caused by improper operation, or it may be related to factors such as infection of the incision and poor healing of the incision site. It will cause the double eyelid surgery to fail, for example, the patient will be accompanied by symptoms such as large and small eyes, asymmetry of both eyes, and double eyelids that are too wide or too short, which will affect the appearance of the face. It is necessary to perform double eyelid revision surgery under the guidance of a doctor** to increase the contour of the eye and improve the symptoms of double eyelid failure.

Double eyelids can make the eyes look more energetic and deeper, showing an elegant and charming charm. Every girl loves beauty, and a pair of good-looking and charming big eyes can often make people look more energetic and attractive. Having a pair of attractive and beautiful big eyes is the dream of many beauty lovers, and it can add points to our appearance.

However, not everyone is born with a pair of attractive big eyes. But with the continuous development and progress of science and technology, especially the development of medical aesthetic technology, it is no longer difficult to have a pair of beautiful big eyes, and more and more people are beginning to make themselves have a beautiful double eyelid through double eyelids. Double eyelid surgery is one of the most popular types of oculoplastic surgery.

So what are the reasons for the failure of double eyelid surgery?

1. Improper selection of indications.

Different blepharoplasty has different indications, and both the performer and the recipient should be aware that not all single eyelids need to be blepharoplasty, and not all people with single eyelids will have a double blepharoplasty that adds to the aesthetics.

2. Poor or wrong preoperative design.

The correct design of the double blepharoplasty line and its shape is a prerequisite to ensure the success of the double eyelid cosmetic treatment. If the design is not serious or the correct design method is not adopted, it will inevitably lead to problems such as too high or too low double eyelid line, bilateral asymmetry, and poor shape of double eyelid line.

3. Improper choice of surgical method.

Poor choice of procedure is another major cause of poor or failed blepharoplasty results.

Double eyelid surgery is one of the most common procedures for all cosmetic surgery. All people can accept double eyelid surgery, double eyelid surgery can help everyone have a pair of beautiful big eyes, many beauty lovers will choose to do double eyelid surgery, but as long as it is surgery, there will be certain risks, so let's introduce to you what are the common reasons for the failure of double eyelid surgery.

1. The double eyelids are too wide, too long, too short, and bilaterally asymmetrical due to improper design.

2. Incision scar: due to incision infection, poor alignment of the incision site, or scar constitution.

3. Weakness in opening the eyes; The surgeon has ptosis or levator muscle weakness before surgery; Intraoperative incision of the levator palpebrae aponeurosis with deep injury.

4. Triple eyelid formation; The original double eyelid line is not separated, and the newly designed double eyelid line forms a triple eyelid, which is more common in this kind of double eyelid thread. In the double eyelids, due to excessive removal of the upper orbicularis oculi muscle, the upper eyelid** adheres to the deep tissue to form a triple eyelid.

5. The double eyelid line disappears; Because the double eyelid design line is too low to form an inner double, the removal of the orbicularis oculi muscle in front of the tarsal plate is not enough, which hinders the adhesion between ** and the tarsal plate; not fixed to the tarsal aponeurosis at the time of suture; The stitches are removed too early, and the adhesion is not strong enough.

For example, the most common type of facial plastic surgery, "double eyelid surgery" (i.e., double eyelid surgery) seems simple, but in fact it is the most successful surgery, resulting in scarred eyes, triple skin flea eyes, large and small eyes, and other strange conditions. The size of the double eyelids is very particular, the small "inner double" or invalid, and the large one is fake. If you want to rank the failure rate of plastic surgery, double eyelids should be the first to bear the brunt.

The main reasons for the failure of double eyelid surgery are as follows: improper design, which does not consider the bilateral asymmetry of the patient; double eyelid lifting, detachment or no double eyelid appearance; excessive removal of orbital septal fat; Obvious postoperative incision scar: incision infection, irregular incision margin, poor alignment, or scar constitution, etc.

Most of them are due to the doctor's technical problems, and some of them are due to their failure to follow the doctor's instructions after surgery, lack of taboos and care in place, and the failure of double eyelids due to the hyperplasia of meat strips.

Mainly for patients with thick eyelids, the use of the thread embedding method fails to make the tarsal plate and ** permanent adhesion at the double eyelid, and the anterior orbital septum fat and orbicularis oculi muscle of the tarsal plate are not completely removed when the incision method is used, and ** fails to adhere to the tarsal plate, etc., which will cause the double eyelid line is not obvious.

1. Improper selection of indications.

2. Poor or wrong preoperative design.

3. Improper choice of surgical method.

4. The operator lacks sufficient knowledge of eyelid diseases.

5. Loose operation or lack of scientific attitude.

6. The practitioner lacks a good sense of aesthetics.

Failure of the surgery may result in an incision scar. There are many reasons for this, but it may be that the incision is infected during the surgery, and the incision is not properly closed, which can lead to the failure of the double eyelid surgery.

There are seven reasons for the failure of double eyelid surgery, the first is excessive scarring, which is due to rough surgical operation, or not careful suturing, or a factor of the patient's personal constitution. The second type is incisional depressed scar, which is formed due to poor alignment of the orbicularis oris muscle during surgical suture, or excessive resection of the orbicularis muscle during surgery, so that a depressed scar of the incorpois will be formed after recovery. The third type of double eyelid is too wide or too narrow, the main reason is the surgical design, but in addition to the design factor, there are other reasons for the double eyelid too wide, such as excessive fat removal, or intraoperative eye muscle injury, which will also cause the double eyelid to be too wide after recovery.

The fourth type of double eyelid is too long, and the double eyelid is too long and often appears a drooping appearance at the end of the eye, which makes the eyes look old. The fifth type of double eyelid has one or more extra folds on the line of Zhengming Hu Chang's double eyelids, which is due to excessive removal or damage to the soft tissues above the double eyelids, resulting in abnormal adhesions. The sixth type of bifurcation is mainly caused by the uneven removal of this soft tissue at the head of the eye, or the misalignment and healing of ** during suturing.

Seventh, double eyelid asymmetry. There are many reasons for double eyelid asymmetry, such as design factors, levator muscle factors, fat position factors, orbicularis oris muscle factors, so these factors can lead to the occurrence of double eyelid asymmetry.

There are eight types of double eyelid failure: first, there is a sense of flesh argument, second, sunken, third, double double eyelids, fourth, ptosis, fifth, obvious scarring, sixth, bilateral asymmetry, seventh, the double eyelid line is too wide, and eighth, the double eyelid line disappears.

1. It is laborious to open your eyes. After double eyelid surgery, the eyes may be strained to open or accompanied by ptosis, and there will be a feeling of calm discomfort. This is due to rough surgical procedures, excessive tissue damage, bleeding, hematoma, or tissue adhesions.

In addition, damage to the levator palpebrae muscle or the adhesion between the orbital diaphragm and the levator palpebrae muscle and scar constitution can also cause difficulty in opening the eyes;

2. Wrinkles or "triple eyelids". This is due to uneven tissue removal due to the double eyelid line that is not designed in a natural curvature. In addition, improper suturing, failure to follow the natural direction of suturing, misalignment suture, too tight or too loose may cause "three eyelids";

3. The eyes are asymmetrical and the curvature is not ideal. If the double eyelids are wide and narrow, or the eyes are normal and the eyes are abnormal, this is caused by differences in bilateral peeling, tissue removal, etc., and differences in sutures. In particular, the operation of the two eyes is not operated by one person, which is easy to cause large errors and make the two eyes asymmetrical;

4. Sunken eyelids. The cause is excessive removal of orbital septal fat.

5. The double eyelid line disappears; The reason is that the design line of the double eyelids is too low, forming an inner double; Removal of orbicularis oculi muscle in anterior tarsal plate is not sufficient to prevent adhesion to the tarsal plate; not fixed to the tarsal aponeurotic membrane at suture; The stitches are removed too early, and the adhesion is not strong enough.

6. Incision scar. The cause is incision infection, the incision edge is not neat and poorly aligned, or the patient is scarred;

7. Double eyelids fall off. This is mostly a complication of double eyelid threads. Generally, after double eyelid surgery, the eyelids gradually narrow over time, or even fall off completely.

The loss of double eyelids can be unilateral or bilateral. The cause of detachment is that the thread is not properly fixed to the tarsal plate when the thread is embedded, or it is caused by a chronic blunt cut of the thread.

Hello, glad to answer for you. According to the situation you described, the symptoms of failed double eyelid surgery are: 1. Failure to follow the natural curvature design, uneven removal of tissue, wrinkled or triple eyelids.

2. One is wide and one is narrow, one up and down, so that the eyes are asymmetrical, and the curvature is not ideal. 3. The surgical operation is not delicate, resulting in tissue adhesion hematoma and causing difficulty in opening the eyes.

Guidance: Discovery.

Double eyelid surgery.

disappearing, or the double eyelids are too wide, and the two eyes are asymmetrical; The double eyelids are too low, the curvature is not good-looking, and the eyes are sunken; Occurs postoperatively.

Ptosis of the upper eyelids. Lower eyelid ectropion.

situation. All can be symptoms of failed surgery!