Can direct oyster meat be fished, can oysters be used as bait for fishing

Tribute oysters. When you fish, it feels incredible. The Taiwanese master on the side caught the fish every once in a while, and the fish on my side seemed to be fishing in a water tank, and there was no signal.

Immediately came forward to ask for advice, through the master's careful teaching, I learned that the Gonghai oyster fishing method actually needs to understand far more complicated than many fishing methods, more need to master the changes between the tides, the bottom situation. The selection of oysters for fishing varies depending on the month, and the selection of various sea breams is also different. It seems to be a very simple fishing method, but it covers so many levels of knowledge, I have to admire the master to the five-body land.

1. Suitable waters.

This method is not suitable for all seas, and it is very useful in the shallow coastal fields. As long as the water area should not exceed 12 meters and the current speed is not large, it can basically be fished. In general, fishing is done in oyster farming areas, shellfish farming areas, and fish rafts in waterways.

Try to choose an area where the underwater conditions are not very complicated and the terrain is relatively flat.

Second, the selection of fishing tackle.

The raft rod selected in the Gonghai oyster fishing method is generally above the raft rod, it is best to use a hard 19 tone, 28 tone sensitivity is about 6 cm in front of the slightly, on the tip of the super hard raft rod, the advantage is that it does not affect the sensitivity of the premise to provide the hardest rod body, can quickly remove the fish from the oyster string environment, to prevent tangents.

Run fish. Because most of the oysters are fished on boats, the rod is short and inconvenient to operate.

Fishing reels can be raft fishing reels (no unloading force is preferred) or gossip reels (also known as disc wheels); I think the disc wheel can give full play to this fishing method. Gong sea oyster fishing method needs to keep the rod in hand when fishing, and it is recommended that anglers choose lighter raft wheels and raft rods. The fishing line is generally made of carbon line directly tied to the hook, no need for sub-line links and counterweight lead, different areas of the fishing line depend on the size of the fish, it is recommended to have more than 2 carbon line.

The hook is selected from No. 2-4 Chito hook, which is used in the face of super-large black sea bream.

, it is possible to use hooks larger than 4 gauges.

Using raw clam meat as bait is far more effective than cooked clam meat. Especially when the density of the fish is relatively thin, and it coincides with the noon fish foraging is not active, use clam meat to catch bait, the fish sometimes only touch once, because the taste is not fresh, it does not swallow. At this time, the fish will not run far, and if you immediately change to raw clam meat and still trolling here, you will soon be able to catch it.

But the biggest difficulty with using raw clam meat as bait is that it is difficult to take out raw clam meat directly. If you smash the clam shell, it is difficult to remove the meat completely, and it is very troublesome to pick it up.

To solve this problem, I had to take a compromise approach, which was to blanch the clams and remove them as soon as the shell was only slightly opened. At this time, the clam meat is slightly shrunk, and the meat is not fully cooked, which maintains the fresh smell of the clam meat, and the effect is better than that of the fully cooked clam meat.

If the clam meat needs to be stored for a long time, it can be sprinkled with a little salt to keep it fresh, packed in a plastic bag according to the amount required for each fishing, and put it in the refrigerator for frozen storage. If you only need to store it for 3-5 days, you can store it in the refrigerator and take it whenever you use.

These half-cooked clam meat is best preserved in a humidor with ice cubes, placed in the shade, and used as much as you want, to prevent sun exposure and deterioration.

After all, half-raw clam meat is still not as effective as raw clam meat. When I go fishing, when I encounter low tide, I will generally go to the shallow beach or ditch to dig 3-5 catties of clams, and bring a few bottles of seawater back with mineral water bottles, and put the clams in the pot for 3-5 days. These temporary clams open their shells and stick out their heads in the water.

At this time, you can use a 3-4 cm long straw thick grass or stick prepared in advance, insert it into the clam shell, and the clam will quickly close the shell and clamp the straw stick. Put the clams with straw sticks in a plastic box and press them tightly or put them in a thick plastic bag to make it difficult for the shell to open again, and then store them in the refrigerator. When fishing the next day, take it to the spot, pull out the clams through the gap in the stick, take out the meat and hook it to use.

Summary. Fishing is carried out in oyster farming areas, shellfish farming areas, and fish rafts separated by waterways. Try to choose the bottom situation is not very complicated, the area with relatively flat terrain is first in the choice of tribute oyster fishing, should choose a clearer water environment for fishing, more prominent bait in the bottom of the water, and secondly, we try to pick the oyster full when selecting the oysters to choose the smaller oysters with the shell broken, but do not knock too broken, not good to make a nest, see the direction of the tide, to the fishing area every 30 minutes to make a nest.

Hello, oysters can be used as bait for fishing.

Fishing is carried out in oyster farming areas, shellfish farming areas, and fish rafts separated by waterways. Try to choose the bottom situation is not very complicated, the area with relatively flat terrain is first in the choice of tribute oyster fishing, should choose a clearer water environment for fishing, more prominent bait in the bottom of the water, and secondly, we try to pick the oyster full when selecting the oysters to choose the smaller oysters with the shell broken, but do not knock too broken, not good to make a nest, see the direction of the tide, to the fishing area every 30 minutes to make a nest.

Summary. The methods of making oyster meat bait are: open a sea oyster, take half of the shell with meat, use the hook belly of the hook to lift the white belly end of the oyster, and penetrate the hook tip into the white position until the hook is completely buried in the oyster, and hook the tougher part after reversing a circle, subject to the hook tip facing up.

Throw the oysters into the fishing spot and let the oysters fall naturally. Choose 2 to 3 conjoined oysters according to the size of the current, this oyster shell is your lead, gently pull the line group, so that the oysters are out of the bottom of the water and re-landed, at this time you can look at the rod tip and wait for the signal.

Hello, Mo is very happy to judge the closure of your service, first of all, in the choice of Gong oyster fishing digging code cracking method, should choose a clearer water environment for fishing, more highlighting the state of the bait in the bottom of the water, and secondly, we try to pick a full oyster when selecting oysters for fishing.

The methods of making oyster meat bait are: open an oyster, take half of the meat with the shell, lift the white belly end of the oyster with the hook belly of the hook, penetrate the hook tip into the white position until the hook is completely buried in the oyster, and hook the tougher Shenqin part after reversing a circle, subject to the hook tip facing up. Dress up as a bridge and throw the oysters into the fishing spot, so that the oysters will naturally fall to the bottom.

Choose 2 to 3 conjoined oysters according to the size of the current, this oyster shell is your lead, gently drive the line group, so that the oyster can get out of the bottom of the water and land again, at this time you can look at the rod tip and wait for the signal.

The meat fishing used for sea fishing is as follows:

1. Fish: Using fresh fish meat as bait, especially using fish meat similar to the target species, can attract the corresponding fish.

3. Fishy meat: Some fish are very sensitive to fishy meat. Meat bait with a fishy smell can be used, such as fish heads, fish offal, etc.

4. Shellfish: Shellfish such as clams and mussels are also commonly used as sea fishing bait, and many fish are attractive to shellfish.

How to fish in the sea

1. Casting: This is one of the most common sea fishing methods. It uses tackle and bait with weights, throws it on the beach or rocks, and waits for the fish to bite. This method is suitable for shallow water areas closer to the coast.

2. Boat fishing: This method requires the use of small boats or fishing boats to put fishing tackle and bait in deep water far from the shore. Boat fishing allows for larger fish such as sharks, cod, etc.

3. Float fishing: In this method, a shouting buoy is used to float the tackle and bait. The buoy keeps the tackle at a certain depth, making the bait easier for the fish to spot.

This method is suitable for shallow areas of the coast.

4. Surf casting: This method is to stand or walk on the beach, throw fishing tackle and bait far into the waves, and then wait for the fish to bite the hook. This method is suitable for beaches with large waves hitting the beach.

5. Rock fishing: This method requires fishing on the rocks of the coast. Tackle and bait will be thrown into rocky areas far from the shore, so you need to be safe and choose a solid spot.