What is an end tooling

What is an end-effect?

and industrial robots (including six-axis robots, high-speed line suspended robotic arms.

A set of products with truss manipulator (including high-speed line Gudel speedbar, Robobeam) and the end of the power-assisted manipulator are connected to assist the above equipment in picking up and handling the workpiece as the main function, collectively referred to as the end tooling.

Another manifestation is the use of parts transfer of automatic multi-station presses, which are handled in the form of transfer, and pneumatic clamps are used to clamp parts, which is called multi-station end tooling.

In the current intelligent manufacturing environment, it is widely used in various industries, such as electronics, automobiles, injection molding, packaging and so on. I have been engaged in automotive stamping automation tooling for 14 years, mainly in the stamping industry.

As far as the stamping industry end-tooling is concerned, there are two kinds of end-tooling: hot-formed end-tooling and cold-stamping end-tooling.

In terms of the structure of the tooling, there are two types: suction cup and multi-station fixture.

Because the domestic end fixtures are deeply influenced by Europe, America, Japan and South Korea, they can be divided into European, American and Japanese and Korean.

What are the domestic end fixture manufacturers?

15 years ago, domestic stamping fixtures were mainly brands from Europe, America, Japan and South Korea. The influence of Europe and the United States is relatively large, such as SAIC-GM and Changchun FAW-Volkswagen.

All of them are European and American structures, and profoundly affect the equipment selection of downstream merchants, the materials are mainly aluminum, and gradually develop towards lightweight and modularization, which is the mainstream structure in China so far.

The Japanese and Korean systems are mainly based on Nissan.

Modern these enterprises, including their downstream merchants, materials are mainly steel, often welding as a means, with the development, but also to aluminum, modularization.

The foreign end-fix manufacturers that have entered the country are: bilsing cpi abb ihi

At the same time, the rise of domestic tooling manufacturers, the market of foreign tooling manufacturers has been very small, only existing in some of the main engine factories that are not bad, and some foreign tooling manufacturers have withdrawn from the domestic market (for example, there is a tooling company in South Korea, I really can't remember his name).

<> at the same time to talk about Jinan two machine tools, the early stage of the two machine tools of the end of the machine tool is mainly based on the structure of ABB, with the development, more and more high-speed lines, has been developing in the direction of the second generation of the end of the tooling structure, and because of the two machine tools have a cooperative company, the launch of the second generation of the second generation of the structure of the CDI is mainly CPI, the second generation is similar to the structure of the Schuler servo line.

With the influence of the second machine tool, other domestic automation integration manufacturers have followed up, and the end tooling structure adopted by Jier has become the mainstream in China.

Domestic manufacturers specializing in the design and production of end fixtures, Kunshan Yunteng Automation Technology is one of them.

The tooling is a set of mechanisms used for object grasping and handling, which can be installed on robots or automation equipment to carry out object grabbing-handling. At present, the commonly used industries are basically sheet metal industry (automotive sheet metal stamping, home appliance sheet metal stamping, laser cutting loading and unloading), injection molding industry (grasping of injection molded parts), general industries (including glass, wood, packaging logistics, etc.).

It is an in-mold transfer system, similar to a manipulator clip. It is widely used in modern manufacturing, including automobiles, electronics and other industries, to replace manual labor, more efficient and accurate production.

What is an end-toolingI really haven't learned about this thing, and I haven't heard of it, so I'd better learn about it, or pay attention to it!

It's a software software or something, you can just look it up online.

Robot tooling, classified by functionFolded type, flat bottom type, oval typeand other types.

Definition of an end-effector:An end-effector is a device mounted on an industrial robot or manipulator that uses a vacuum suction cup or clamp to make contact with the object to be grabbed and carry it from one position to a defined position.

Classification of the end tooling:Folding suction cup: suitable for parts with large arc and rough positioning, with strong adaptability.

Flat-bottomed suction cups: suitable for large flat positions.

Oval suction cups: for use in narrow and compact areas.

Disney (Shanghai) ****** is a limited liability company (wholly foreign-owned) registered in Shanghai on 2006-03-23, with its registered address at Room 1106, Area A, No. 900 Yishan Road, Xuhui District, Shanghai.

The registration number of the unified social credit of the ****** of Disney (Shanghai) is 91310000785878269W, and the enterprise is currently in operation.

The business scope of the ****** of Disneytech (Shanghai) is: wholesale and commission of industrial automation worktool systems, material handling systems, various robot tooling systems, grippers and other industrial clamps, clamps, grippers, hydraulic pipelines and components, hydraulic cylinders (except auctions); Import and export of raw materials for the above commodities, after-sales maintenance, technical support, consulting services and related supporting business. (Commodities involved in the management of quota licenses and special regulations shall be handled in accordance with the relevant provisions of the state) [For projects subject to approval in accordance with the law, business activities can only be carried out after approval by relevant departments].

In Shanghai, the total registered capital of companies with similar business scope is 354654 million yuan, and the main capital is concentrated in 118 enterprises with a scale of 10 million to 50 million yuan and more than 50 million yuan. Within the scope of this province, the registered capital of the current enterprise belongs to the general.

Through corporate credit.

Introduction: Disneytech (Shangfu Sleepy Sea) ****** was established on March 23, 2006, the main business scope is engaged in industrial automation end tooling system, material handling system, all kinds of robot end tooling system, production line transmission with grippers, grippers, grippers, grippers, hydraulic pipelines and components, hydraulic cylinder wholesale, commission** (except auctions), etc.

Legal representative: Hua Zhen.

Registered capital: 300,000 US dollars.

Industrial and commercial stool registration number: 310000400524603 enterprise type: limited liability company (wholly foreign-owned).

Always check carefully after replacing the tooling. Confirm the locking.

This is quite expensive, so let's see if it's imported.

The total number of international shares issued to Party A has been several.

progressive tooling

It's a progressive die. transfer tooling

It is a multi-station mold.

The difference is that the former means that all stamping processes are compounded together in order to become a multi-step single-process mold, and the strip directly goes through multiple steps and is separated into a finished part in the end, that is, there is only one set of molds.

The latter is a plurality of sets of molds installed on the multi-station press, and some are also made into a set of molds, which is also equivalent to a progressive die, and the stamping semi-finished products and finished products are transmitted between the processes through transfer, and the raw materials are not strips but rectangular materials or falling shape materials.

So the biggest difference between the two is the raw materials.

The former is generally suitable for the production of some ultra-small and small parts, such as LEDs, motor rotors, usually the process is simple, even if the drawing is very shallow, the latter is generally used for the production of small and medium-sized parts, such as some trabecular parts on the car. Lupai.

tooling also has the meaning of tooling, and transfer tooling can also be understood as the transfer of tooling, that is, the chuck.