How do I install the memory, and how do I freeze often?

I think the crash is that the memory is too small, if you install the XP system, and then open three or four web pages, the computer does not respond for half a day, that is normal. It is recommended to upgrade the memory, depending on your configuration, the first batch of P4 has just been launched or has just been on the market, so you use RAMBUS memory, and if you want to upgrade this memory, you must buy a double bar to run. Brother Ren is afraid that he will have to go to the second-hand market to find it, just because Rambus memory is expensive**, the best partner of Intel who used to be the best partner of the storm disappeared from the market prematurely.

Frequent crashes are a problem with memory, and the same memory may not be compatible, so it's best to change to a larger memory.

Since someone else recommended this to you.

Don't doubt it.

Because memory modules need the same frequency.

The use of RDR memory modules is a pair to work properly

Your computer is 128MB, that's 64*2.

It is recommended to reinstall the system or according to the bad batch!

The memory doesn't have to be the same. The frequency should be the same.

The freeze may be a problem with the IE settings, or the IE has a virus. It is recommended to kill the virus first and then reset it.

That's right. Your 850's motherboard has to be the same.

There are too many animations and ** and so on in the web page you open. And your memory is small, so there will be unresponsiveness.

The memory brand does not need to be the same, but the frequency should be the same.

If the system you just installed has such a situation, it is a problem with the computer

1.After being installed on the motherboard, both the motherboard's BIOS and system can be recognized and used. However, the mixing of old and new memory may not be recognized, because the production batch between the two is different, the memory particles are different, and the latency is also different, so sometimes it is not possible to identify two different brands or different batches of memory on the motherboard at the same time, but switching to one does not have this problem.

2.There is no need to reinstall the system to change the memory, because the system will perform a system pre-read before entering the system, which will read the memory and automatically cache the system changes accordingly.

3.The maximum support of 2G in the motherboard description means that the total amount of memory supported by the motherboard is 2G, no matter how many memories there are, more than 2G is only 2G. Because the motherboard BIOS does not recognize more than 2G, if the new BIOS can provide support for a larger total memory, the motherboard can be updated to support a large total amount of memory.

4.As mentioned above, the maximum total amount of memory supported by the motherboard is 2G, and your single 2G has already met the maximum requirements supported by the motherboard, and you can only recognize it as 2G if you add it (when it can be turned on).

5.This motherboard does not release a BIOS with Chinese, as long as it is released.

1.Insert the slot and it will be recognized when you turn it on. 2.

Ideal for reloading the system. The system is automatically assigned based on the hardware. 3.

The maximum support is that the motherboard supports 2G memory. Questions 3 and 4 are the same. No matter how much memory you insert into the motherboard, you can only set 2G of memory.

PressGo to the BIOS

If it is Chinese, Chinese is supported.

If it's not ,..

1. When the memory increases, the system resources decrease.

This phenomenon is generally caused by the incompatibility of the motherboard with the memory, and is commonly used in high-frequency memory on some motherboards that do not support this frequency memory.

2. When running some software, there is often a prompt of insufficient memory.

This phenomenon is usually caused by insufficient remaining space on the system disk, and some useless files can be deleted. Just leave more space.

3. Windows often enters safe mode automatically.

This type of failure is generally caused by the incompatibility of the motherboard with the memory module or the poor quality of the memory module, which is commonly used in high-frequency memory on some motherboards that do not support this frequency memory.

4. When booting Windows from the hard disk to detecting the disk flash, the system prompts that the memory is insufficient.

This kind of failure is generally due to the fact that the user has a file added to the file, and as long as it is blocked, the problem can be solved Chongqing IT Network, focusing on computer education, serving the global scattered people.

5. There is no display when the machine is turned on.

This kind of failure is generally caused by poor contact between the memory module and the motherboard memory slot, just do not use the eraser to wipe its gold finger back and forth to solve the problem (do not clean it with alcohol, etc.), and the memory damage or motherboard memory slot problems will also cause this kind of failure, due to the memory module caused by the boot no display failure, the host speaker will generally beep for a long time (for Award BIOS).

6. The Windows registry is often corrupted for no reason, prompting the user to recover.

Such faults are usually caused by poor memory module quality and are difficult to repair, so the only way to replace them is to replace them.

7. Random crash.

This kind of failure is generally due to the use of several different chip memory modules, due to the different speed of each memory module to produce a time difference from the surface to cause a crash, which can be solved by reducing the memory speed in the CMOS setting, otherwise, only the use of the same model of memory, there is also a possibility that the memory module is incompatible with the motherboard, this kind of phenomenon is generally rare, in addition, it is also possible that the memory module and the motherboard are in poor contact caused by random computer crash.